Question about 1995 GMC Sonoma

Open Question

Where is the blend door actuator on my 1995 GMC Sonoma?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Blend door

ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min

Posted on Dec 15, 2008

Ad
  • 1 Answer

SOURCE: 1998 gmc sonoma push button 4x4 busting diaphram vacuum actuator

On top of the transfer case is a vacuum switch with 3 vacuum lines connected to it. This switch controls when vacuum is applied to the vacuum actuator. This switch can fail partly and allow fluid from the transfer case to be sucked up into the vacuum lines and anything connected to them as well. When you replaced the actuator before, did you notice any oily fluid inside of it?

Posted on Dec 23, 2008

honeymokey
  • 3113 Answers

SOURCE: air blend door

Replace the broken actuator.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: blend door actuator needs replacing does the

no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Posted on Nov 25, 2009

  • 248 Answers

SOURCE: What do I have to remove to access blend door actuator

very lenghty process. too long to describe here....go to Bonneville Forums read the text and follow linked there at the bottom....very good and detailed....I'm doing that right now,,,,it is a bugger,

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I find the ac heat acuator on a 2001 Pontiac Bonneville sle.


How To Install Replace AC Heater Temperature Actuator ...

? 4:40
https://www.youtube.com/watch?v=mVP09M7hLB4
Jul 21, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/temperature-blend-door-actuator/i/1ahcx00293 ... How To Remove Install Door Chevy Monte Carlo Pontiac Grand Prix ...

GM Blend Door Actuator Repair (Saturn, Chevy, GMC, Buick ...

? 4:28
https://www.youtube.com/watch?v=fER3ZqnYLZg
Jul 11, 2014 - Uploaded by willmacneill
The procedure is the same for most GM blend door actuatorsfrom 1990-2013 (found in many vehicles made by Chevy, GMC, Buick, Pontiac, ...

Mode/Temperature Door Actuators May Fail : Pontiac ...




Jan 16, 2016 | Pontiac Cars & Trucks

1 Answer

Heater blend door


They are under the dash behind the glove box.

Jul 14, 2013 | 1996 GMC Sonoma

1 Answer

1995 gmc sierra 1500 actuator looks to be working correctly but i still get a small amount of air through defrost or panel when i have the slector set to floor ? blend door ?


Does the actuator make any kind of clicking noise? That sometimes indicates that there is a broken gear tooth inside the actuator. Are we talking about a little air or a lot of air? Sometimes junk does get into the air box and will stop the door from repositioning correctly. You can try that. Yes, the blending door is directly connected to the actuator.

Dec 04, 2017 | 1995 GMC Sierra

1 Answer

1995 GMC pickup. Cold AC will blow through all settings (defrost, front vents and flloor) but warm air will not come out the defrost. You can hear something click in the dash that you assume is some kind...


good work, the clicking noise you hear is the blend door trying to move. this door is what controls the temp. the most common reason is the actuator motor is bad but sometimes the door hinge breaks, this hinge slides into actuator and is used to move the door. you will need to locate it on the heater box by locating the noise and then remove the actuator and see if the hinge is broken, i will try to enclose some picture to help you. good day, hope this helps.johnjohn2_142.jpgjohnjohn2_160.gif

Sep 24, 2011 | 1995 GMC Sierra C1500

1 Answer

I have a 98 GMC Sonoma and the A/C will not work. It only blows heat even when its in the Max A/C position. Do you think this could be the blend door actuator? It is manual not automatic


Yes - a blend door is definitely a possibility, especially if it blows heat. If the A/C was low on freon - the temperature would be at least ambient temperature.

May 27, 2011 | GMC Sonoma Cars & Trucks

1 Answer

My 2001 gmc sonama heater doesn't work ..only blows out cold air...what's wrong?


This no heat problem is one off two things, you may be low on coolant and its not flowing into heatercore or the actuator motor that controls the blend door is bad, the blend door is a door in the heater boxs that opens or closes to give you hot air or cold.

Dec 09, 2010 | 2001 GMC Sonoma Extended Cab

1 Answer

I have a 2000 GMC Sonoma. The heat gets warm until the fan is turned on then the air turns cold. Acts like it is not switching over from ac to heat. what can i do about it?


Probably the blend door not actuating. I do not have the manual on where your door actuator is. It's usually right of center under the dash. Look under there and see if you can see anything trying to move when you change the temperature setting. Also, if you hear a clicking noise, that would be the actuator stripping it's gears. If youy can find the actuator, take it off and see if you can manually rotate the door hinge. If yes, replace the actuator. If not, you will have to remove the heater box to find out why the door is jammed. The actuator looks like this:

c64cdd8.jpg

Oct 20, 2010 | 2000 GMC Sonoma Extended Cab

1 Answer

Cannot find fuel filter on my gmc sonoma 1995 4


On my 1996 it is mounted near the inside of the left frame rail just behind the drivers door. Hope that helps.

Jul 26, 2010 | 1995 GMC Sonoma

Not finding what you are looking for?
1995 GMC Sonoma Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...