Question about Cars & Trucks

1 Answer

Will codes P2119,P2101,P1516 cause no spark and no start?

Engine will turn over but want start sometime i can see a spark at the begining of the cranking but it stop in a few seconds i took a spark plug out it had gas on it. also sometime when cranking after i turn the key loose the starter will keep turning for a few seconds.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 4,740 Answers
  • Joe Russell Dec 12, 2016

    i check for powwer at the plugs with a DT-830B digital multimeter it show 12.3 voltage with key on and i also use a led light at the plugs with key on power at black and purple wire no power at pink wire. with key off power at black, purple and pink wire this is the test i use with the led light what i mean about power the lights on my tester light up when i connect it to the wires at the plugs do power supose to be at all 3 wires when key is off? where do i set the multimeter when checking the resistance on the crank sensor? hope you can help. thank you

  • noel
    noel Dec 12, 2016

    try this link..http://atlib.info/blog/133-how-do-i-chec... this one..https://www.google.co.uk/search?q=where+...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will codes P2101 and P1516 cause no spark at the coil over plugs?


unlikely
code p 2101 is throttle actuator problem and code p1516 intake manifold air control solenoid
no spark can be cam/crank position sensor, immobilizer , ignition control module or ECM problem

Dec 04, 2016 | Cars & Trucks

1 Answer

2004 GMC Envoy SLT 4.2L the engine will crank but want start why?


P1516 = Throttle Actuator Position Performance
P2101 = Throttle Actuator "A" Control Motor Circuit Range/Performance

Both of these codes indicate a problem with your throttle position actuator system. I'm not sure how GMC/Chevy treat this, it's possible that if the PCM/ECM will not allow the engine to start if the throttle actuator is not working properly (it may cause the engine to accelerate rapidly when running). You could try replacing the throttle actuator, but that may not solve the problem if it's a wiring issue. Best to have it checked out by a qualified mechanic.

Nov 24, 2016 | GMC Cars & Trucks

2 Answers

What will cause a 2009 Pontiac g8 gt 6.0 motor to not fire one side of motor


I am reading something all about Limp Mode
or LIMP SAFE MODE...

Which seems to be all about
Thread G8 GT Limp Mode P1516 P2101 P2176

the car being driven at extremes... in other than
prescribed parameters ... causing OBD codes to be posted

My guess you are experiencing Limp Mode

I tried to pull up schematics from Autozone... but your car is not supported Looking for common coil (or coils) fuse(s).

G8 GT Limp Mode - P1516, P2101, P2176
Particularly this last thread [4 cylinder failure]
... but read on

and disconnecting the battery [ ill advised ] to reset the "condition"


Lifter failure or stuck in limp mode or WHAT is going on PLZ HELP LS1TECH

Not Limp Mode

Jan 17, 2016 | Pontiac Cars & Trucks

1 Answer

How do I fix diagnostic codes of p2101 p2119 p0172and p0368 on a saturn ls300 2004 how can I fix this please


I guess not! Rarely does a vehicle set four codes at once. Was this something that happened at the same time, or have you had a check engine light for a while and just now got driveability issues bad enough to warrant repairs? Regardless, here's what I was able to find for you.
1. The P2101 and P2119 codes may be related. They both refer to the TAC (Throttle Actuator Control) Module. The code is set if the module reports values the ECM is not expecting to see. The 2101 code basically says to replace the TAC. The 2119 codes says you could inspect the throttle plate to see if carbon buildup is preventing it from closing properly. I would do the inspection and cleaning if warranted and then see if the codes clear and stay away. Otherwise replace the TAC.
2. The P0172 is a veritable Pandora box of yuck. The code is called "Fuel Trim Rich Bank 1", which is a polite way of saying "I hope you have a fat wallet". The list of possible causes here is as long as you arm. They include:

  • Faulty front heated oxygen sensor
  • Ignition misfiring
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Incorrect fuel pressure
  • Faulty Mass Air Flow (MAF) sensor
I am linking you to the page I researched for this code as there is a Saturn Factory Service Bulletin regarding this code.
P0172 Saturn Fuel Trim System Rich Bank 1
This may be a good starting point to try to remove this code.
3. The P0368 code suggests a bad camshaft position sensor. You should be experiencing driveability issues (stutter/stall) with this code.

Hope this helps!

Dec 31, 2014 | Saturn Cars & Trucks

1 Answer

Corvette c6 2006 engine mil code p1516 whats this code telling me


After clearing the codes, the check engine light comes back on?

Apr 20, 2014 | 2006 Chevrolet Corvette

1 Answer

P1516 p2101 27 chevy cobalt


check the plug going to your throttle body sometimes the small wires will visually look ok but will have break 1-4 inches from plug or in the plug itself

Dec 23, 2013 | Chevrolet Cars & Trucks

1 Answer

2 error codes on 2006 chevy cobalt p2101 and p 1516


P1516 IMRC Input Error (Bank 1)
P2101 Throttle Actuator Control Motor Circuit Range/Performance
---------
fgtech v53

Mar 28, 2013 | 2005 Chevrolet Cobalt

2 Answers

I recently did a scan on my engine and multiple code came up. Can you help me find out what they mean? (p01516, p2101, p2119, p2176)


The letter p stands for powertrain, codes are as follows:
1516-Throttle Actuator Control Module
2101-TAC Position Performance
2119-Throttle Closed Position Performance
2176-Minimum Throttle Position Not learned
All the codes pertain to the Throttle Actuator Contol Module. If you are having driveability issues, you may want to look into replacing the TAC.

Feb 25, 2011 | 2008 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...