Question about Cars & Trucks

Open Question

The oil filter is on the pump - Cars & Trucks

Posted by on

  • swaffken Dec 12, 2016

    Hi lodewyk jacobus lesch, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pump relay on a 1998 Chevy S-10


Your kidding right ? The oil pump is mechanical not electric , no relay .
Full pressure lubrication, through a full-flow oil filter is supplied by a gear-type oil pump. Oil is drawn up through the oil pump screen and passes through the pump to the oil filter.

Jun 25, 2015 | Cars & Trucks

1 Answer

Causes oil pressure


check that you are putting the filter in the right way as you may be blocking the flow instead of filtering the flow.

Apr 07, 2014 | Saturn Ion Cars & Trucks

1 Answer

93 toyota lucida massive oil leak


Replace the oil ring on the oil filter or get another oil filter.. B4 screw in the oil filter apply some oil to the oil ring..

Feb 01, 2013 | Cars & Trucks

1 Answer

Replace oil pump in 94 grand am


the 2.3 and 3.1 engines need to drop oil pan.for the 3.3 engine you have to remove timing chain cover.you have to remove oil filter adapter the pressure regulator valve and the valve spring.then remove oil pump cover to oil pump screws remove cover remove oil pump gears.when installing another new oil pump lubricate the oil pump gears with clean engine oil pack the pump cavity with petroleum jelly.torque oil pan cover screws to 97 inch lbs which would be 11 ft lbs torque.oil filter adapter plate 24 ft lbs.

Jan 11, 2013 | 1994 Pontiac Grand Am

1 Answer

We are overhaulin a 4hf1 engine. There seems to be no oil circulation. The oil light is not going off too. We have purchased a new replacement oil pump but no change.


Oil pressure switch is on the opposite side of engine to oil filter so the oil has to have pressure through the crank to go off.
To trace:
1. Remove sump/oil pan and remove oil pump.
2. Check oil pump turning it by hand.
3. Is the oil outlet pipe going to filter connected? There is s rubber O ring at the top too. Check.
4. Remove oil filter and check gallery pump to filter using compressed air.
5 If ok check oil filter to engine gallery as above. You might have to loosen the main bearings so that the oil gallery is not restricted by the bearings.
6. Remove oil pressure switch and blow jouna from tha end as well.
7. All that done and with oil OK down there chech if you are getting oil on the rockers after starting engine. If OK then you are done. If not check head gasket installation.

Sep 01, 2011 | 1995 Isuzu Pickup

3 Answers

Oil is leaking from where the oil filter is screwed into... is this the oil pump? is it difficult to replace?


Oil pump?

Your filter is leaking, check it out.

Can only be the adapter or the filter gasket

Feb 19, 2011 | 2005 Chrysler Town & Country

1 Answer

Oil pump ,,,where is the oil pump located on a 1997 dodge caravan


Hello
Welcome!
Oil pump is located on the oil pan.
Parts needed,,,oil,,,, oil filter,,,, oil pan gasket,,, oil pump,,,, oil pump pickup tube..
time to do this,, about 3 hours
Instructions,
Raise van place on 2 jack stands
drain oil remove oil filter fill new filter install.
remove bolts from oil pan,
remove oil pan..
remove 2 bolts that hold oil pump and tube.

install new pump and tube tork bolts to 45 fp
replace oil pan gasket and install oil pan
tork pan bolts to 35" pounds
install drain plug
fill with oil
start and check for leaks

let me know if i can help more

Jul 17, 2010 | 1997 Dodge Caravan

1 Answer

Need to remove external oil pump on a 95 ford tauras 3.8 v6.what all is involved doing this??


Oil Pump

Removal


  1. If necessary, remove oil bypass filter (oil filter).
  2. Remove oil pump and filter body to engine front cover retaining bolts and remove oil pump and filter body from engine front cover.
  3. Inspect oil pump body seal (6C639), oil pump and filter body and engine front cover for distortion and wear. Replace components as necessary.
Installation

  1. Position oil pump and filter body on engine front cover and install retaining bolts.
  2. Tighten the small engine front cover retaining bolts to 8-11 Nm (71-97 lb-in) . Tighten the large retaining bolts to 23-32 Nm (17-23 lb-in) .
  3. If removed, reinstall oil bypass filter (oil filter).

Dec 04, 2009 | 1995 Ford Taurus

2 Answers

How to change oil pump


drain oil and filter remove.
Drop oil pan under engine.
Un bolt oil pump and re install new pump fill new oil and filter and gasket , cap , start engine test for leaks shut down re check oil level.
Vitally

Sep 10, 2009 | 1998 Oldsmobile Cutlass

2 Answers

Noise engine


replace oil filter bypass (the boss that the oil filter screws to)... other than that ..oil pump failing...main bearings out of spec not allowing oil to stay under pressure and reach the upper valve train...good luck

Dec 12, 2008 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...