Question about Cars & Trucks

1 Answer

Cataring equipment - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 4,807 Answers

Not sure what you are asking but try here... Cataring equipment Google Search

Posted on Dec 12, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse is for the headlights in a 2000 ford expedition


  1. Visually inspect for the following obvious signs of mechanical and electrical damage.

    Visual Inspection Chart Mechanical Electrical
    • Headlamp switch
    • Multifunction switch
    • Battery junction box (BJB) Fuse 3 (30A)
    • Central junction box (CJB) Fuse:
      • 5 (10A)
      • 16 (20A)
      • 26 (10A)
      • 28 (10A)
    • Wiring harness
    • Loose or corroded connections
    • Headlamp relay (if equipped)
    • DRL relay #2 (if equipped)
    • DRL jumper (if equipped)
    • RAP module (if equipped)
    • Light sensor amplifier (if equipped)
    • Headlamp bulb
    Which are out ? both hi an low , just one ?

Feb 22, 2017 | Ford Cars & Trucks

1 Answer

How to change the timing chain for bmw 750 model 2007


Big job see me at www.autorepairhelp.us and will send info to you.
1131 052 - Replacing both timing chains (N62/N62TU)
1 Image ]
Special tools required:
-11 2 001 See: Toolsand Equipment/ll 2 000 Puller
-112 002 See: Toolsand Equipment/ll 2 000 Puller
-112 003 See: Toolsand Equipment/ll 2 000 Puller
-112 007 See: Toolsand Equipment/ll 2 000 Puller
1 Image ~j
Necessary preliminary tasks:
-Remove lower timing case cover See: Timing Cover/Service and Repair/Removing
and Installing Bottom Timing Case Cover (N62 / N62TU)
' Image [
Remove timing chain (1).
Remove timing chain (5).
Release screws (7).
Remove guide rails (3 and 6).
Remove tensioning rails (2 and 4).
Installation:
Maintain tension of timing chains when installing timing case cover.
Observe sparking protection on timing case cover.
Make sure timing chain (1) is correctly installed when placing it in guide rail (3).
1 Image ~j
Attach special tools 11 2 001 See: Tools and Equipment/ll 2 000 Puller and 11 2 002 See:
Tools and Equipment/ll 2 000 Puller to crankshaft.
Insert special tool 112 007 See: Tools and Equipment/ll 2 000 Puller and remove
sprocket wheel with special tool 112 003 See: Tools and Equipment/ll 2 000 Puller.
Installation:
Check sprocket wheels for wear, replace if necessary.
Heat sprocket wheel to 60 CC.
Warning!
Burning hazard! Wear gloves.
1 Image ~j
Assemble engine.

beb7baab-ab9c-4543-8dba-82e3d04322a0.jpg

Sep 06, 2014 | 2007 BMW 750Li Sedan

1 Answer

On my 2001chevy blazer the driver side window won't go down how do I fix it


REMOVAL PROCEDURE:
Remove the window.
  • Disconnect the power window motor electrical connector, if equipped.
  • Remove the electrical harness retainers, if equipped.
  • Drill out the rivets that secure the window regulator to the door.
  • Remove the window regulator from the door.
  • Remove the power window motor, if equipped.

INSTALLATION PROCEDURE:
  • Install the power window motor, if equipped.
  • Install the window regulator to the door.
  • Install the rivets that secure the window regulator to the door using J 34940.
  • Connect the electrical connector, if equipped.
  • Connect the electrical harness retainers, if equipped.
  • Install the window.

Jul 18, 2013 | Cars & Trucks

1 Answer

Spark plug gap for 1996 jeep cherokee


Thread Grand Cherokke, but ask about Cherokee ???

Make: JEEP
Model: GRAND CHEROKEE - LIMITED
Year: 1996
Engine: V8 - 5.2L - FI - - GAS
Part Number RC12YC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)

Engine: L6 - 4.0L - FI - - GAS
Part Number RC12YC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Make:
JEEP
Model: CHEROKEE
Year: 1996
Engine: L6 - 4.0L - FI - - GAS
Part Number RC12LYC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Hope this helps (remember to rate this free answer ans leave some testimonial).

Sep 27, 2011 | 1997 Jeep Grand Cherokee

2 Answers

Need to know the gap for 1995 chev.tahoe spark plug


I prefer bosch plugs :

2000 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2000 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2001 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2001 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2002 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2003 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2004 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LT 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe LT 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe Z71 5.3L 323CID V8 FLEX FI Z - GAP=0.040"; Original equipment is iridium. 2005 Chevrolet Tahoe Z71 5.3L 323CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI V - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LT 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe LT 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe Z71 5.3L 5328CC 325CID V8 FLEX FI Z L59 - GAP=0.040"; Original equipment is iridium. 2006 Chevrolet Tahoe Z71 5.3L 325CID V8 GAS FI T - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LS 4.8L 294CID V8 GAS FI C - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LS 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LT 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium. 2007 Chevrolet Tahoe LTZ 5.3L 5328CC 325CID V8 GAS FI J LY5 - GAP=0.040"; Original equipment is iridium

Feb 19, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

What maintenance should be done for a 2005 ford taurus with 60,000 miles?


Change engine oil and replace oil filter.

Inspect tires for wear and rotate.

Inspect brake pads/shoes/rotors/drums, brake

lines & hoses, and parking brake system.

Inspect wheel ends for endplay and noise.

Inspect engine cooling system and hoses.

Inspect exhaust system and heat shields.

Inspect steering linkage, ball joints, suspension

and, if equipped, half shafts, driveshaft and

U-joints.

Replace engine air filter.

Replace fuel filter..

Replace cabin air filter, if equipped.

Change automatic transmission fluid on vehicles

equipped with the Torqshift and 4R100

transmissions. Replace the remote filter element

on the vehicles equipped with the Torqshift

transmission. Inspect automatic

transmission/transaxle fluid level on all other

vehicles, if equipped with dipstick. Consult your

dealer for your particular requirements.

Change automatic transaxle fluid and filter on all
vehicles equipped with CVT.

Nov 16, 2010 | 2005 Ford Taurus

2 Answers

What size tires come standard with the 1999 ford explorer


Original Equipment Sizes for 1999 Ford Explorer Limited 4wd Original Equipment Size: 255/70-16
Original Equipment Sizes for 1999 Ford Explorer Original Equipment Size 1: 225/70-15 Original Equipment Size 2: 235/75-15
Thank you for using fixya and good luck

Apr 20, 2010 | 1999 Ford Explorer

1 Answer

What size tire does a 2006 relay mini van have?


Original Equipment Sizes for 2006 Saturn Relay 2 FWD
Original Equipment Sizes for 2006 Saturn Relay 3 AWD
Original Equipment Sizes for 2006 Saturn Relay 3 FWD
Original Equipment Size: 225/60-17

Good luck and hope this helps.



Dec 26, 2009 | 2006 Saturn Relay

1 Answer

What,s windstar tire size?


Original Equipment Sizes for 1999 Ford Windstar / LX
Original Equipment Size 1: 205/70-15
Original Equipment Size 2: 215/70-15

Original Equipment Sizes for 1999 Ford Windstar SE Original Equipment Size 1: 215/70-15
Original Equipment Size 2: 225/60-16 / SEL

Hope this helps

Dec 22, 2009 | 1999 Ford Windstar

1 Answer

How do I remove the door panel and replace the inside door handle


PLEASE DON'T FORGET TO RATE!!

Door Panel
  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with remote control mirrors, remove the remote mirror escutcheon, then disengage the end of the mirror control cable from the escutcheon.
5670a53.gif
Door lock remote control handle

849dcc4.gif
Removing the clip from inside the door handle

3. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switches and the cigar lighter (if equipped) from the electrical harness.
4. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.

7c4bfcc.gif
View of the armrest switch cover plate and remove mirror cable attachment

  1. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.

e8e7539.gif
Exploded view of the window regulator handle

4df80bc.gif
Exploded view of the door trim panel

  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switches and cigar lighter (if equipped) harness connectors, then install the cover plate and secure using the plate screws.
  4. If equipped with remote control mirrors, engage the control cable, then install the remote mirror escutcheon.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.
3e5ae04.gif
Exploded view of the 2-piece door trim

  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switch
from the electrical harness.
  1. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.
  2. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.
  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switch harness connector, then install the cover plate and secure using the plate screws.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.

Nov 16, 2009 | 1987 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...