Question about Ford Ranger

Open Question

How do I change the front park light bulb on a ford ranger pickup 2007 south African model

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chuck943
  • 783 Answers

SOURCE: 2004 Ford Ranger. My brake lights won't work.

Ok it was important to know if 3rd brake lamp was working so we would know where to start.
Since it is not then you will have to first check for power to the brake lamp switch on the pedal itself. You should have power on the LG/RD wire which comes from fuse 19 (20 amp) in the interior fuse panel. When you press pedal down power should then be on both sides the LG wire also. This then goes to fuses 42 (7.5amp) for the left rear and fuse 38 (7.5 amp) for the right.

Posted on Apr 13, 2009

Ad
rogrrabbit
  • 986 Answers

SOURCE: Replace Parking light bulb

here is a link to removing that assembly http://autorepair.about.com/library/a/1i/bl808i.htm

Posted on Jun 20, 2009

  • 4 Answers

SOURCE: 2007 FORD RANGER TROUBLE CODES #B2292, B2293

These 3 codes have to do with restraint system.
B2292 Seatbelt pretensioner fault.
B2293 Passenger front airbag fault.
B2691 Seatbelt buckle switch circuit fault Ft.driver side.

Posted on Sep 18, 2009

  • 104 Answers

SOURCE: how to install replacement door handles for 98 ford ranger pickup

remove interior door panel(need special tool to pop plastic clips holding panel to door)with panel off remove plastic film,with window up you should be able to see two 10m nuts-bolts to remove-also have to pop lever off that goes down to door latch

Posted on Sep 19, 2009

  • 4793 Answers

SOURCE: 1996 mazda 626 se V6 2.5 firing order south

looking from the front of the engine back towards the gearbox,left bank 135..right bank 246...Firing order 135624.

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights


was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

Removal of head light assy 1989 ford ranger.


Hello,

To remove the front head light please follow the steps below:
  1. Place the Ford Ranger in "Park." Turn the engine off. Turn the headlights off. Remove the key from the ignition. Allow the truck to cool for about 20 minutes.
  2. Open the hood of the vehicle. Locate the two retainer pins on the headlight assembly of the light that needs to be replaced. Pry the retainer pins open with your finger. This releases the headlight assembly from the Ranger.
  3. Pull the headlight assembly forward. Unplug the electrical connector from the back of the assembly by hand. Rotate the retaining ring counterclockwise and slide it off the plastic bulb base.
  4. Pull the burned out bulb straight out of the headlight assembly. Discard the used bulb. Insert a replacement bulb into the headlight assembly and push it straight into the socket until it clicks into place. Slide the retaining ring around the bulb and rotate it clockwise to secure it.
  5. Plug the electrical connector into the back of the unit. Slide the headlight assembly back into the Ranger. Push the retaining pins back down to secure the headlight assembly.
Hope this helped. thank You for using FixYa!!!

Jan 19, 2011 | 1989 Ford Ranger

1 Answer

2002 Ford Ranger pickup. The signal lights blink real fast and it appears to be wired wrong. Where are the front signal lights located


The light bulbs may have the wrong part number bulb,check the parts store to see that this is the problem,the blinkers are in the front near the headlights.

Aug 15, 2010 | Ford Ranger Cars & Trucks

1 Answer

2003 Ford Ranger, XLT 6Cyl. Flashers, Running Lights, Reverse Light, Right and Middle Brake Light and Headlights are working. Front running/parking lights are not working. Signal Lights, Front and Rear are...


Found very detailed assistance and instructions, FREE on the Ranger Station Forum. It is nice being able to go on-line and find lots of free information from fellow American Ford Ranger owners and not be asked for $$$.

If you want the details let me know and I will send it to you for $19.95 or $39.95 if you want immediate response.

Jan 02, 2010 | 2003 Ford Ranger Regular Cab

1 Answer

Left rear turn signal quit on 2000 ford ranger.


Check correct wattage globe is installed in both front and rear indicator lights;
check if any other side/repeat indicator lights have failed.

Jun 18, 2009 | 2007 Ford Freestyle Limited

1 Answer

How to change blinker light bulb


94 ranger is all I have. Maybe similar

Parking, Turn and Front Side Marker Lamps, Ranger Removal and Installation
  1. Remove one nut that attaches the parking lamp to the opening panel in radiator grille .
  1. Pull parking lamp away from vehicle to disengage the two barbed retainers.
  1. Twist the lamp socket and remove from lamp. For installation, follow removal procedures in reverse order.

Mar 09, 2009 | 1991 Ford Ranger Supercab

2 Answers

Failed smog cause check engine light


I can tell you for sure that all US models of the Ford Ranger came with a emission system that incorporated a MIL or check eng light, go to the dealer and have them run your VIN on the Ford on line information service, that will give you the engine Calibration of the emission system, you can then find out what emission system was used, export or US.

Oct 06, 2008 | 1987 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...