Question about Cars & Trucks

Open Question

Two sides donor line up - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to fix control stability off Suzuki XL7 2008. Car turns on but wont crank.

battery dead, charge it or jumper cable start it , with running donor car, like AAA tow does, (watch them or call them?>)
battery post green with corrosion , clean them its a std service point.
check fuses....
stater hot wired, (above ok) wont crank is bad starter.\
if cranks hot wired, its a good starter by bad key line,
ill stop here, ask who to test key line if you get this far,

that 1st line on Stability , ive not a clue. why not be clear where you see that. (a warning lamp. or? what)

Nov 13, 2015 | Suzuki Cars & Trucks

1 Answer

Is it true that BNSF owns all trackage rights into Western Canada?

It is not true. Canadian Pacific Rail line is Canada's railroad

Dec 09, 2014 | Cars & Trucks

1 Answer

My car will not crank at all

great symptom, we speak dead cranks.
  1. do jumper cable to donor runnning car crank now?>
  2. yes, bad or just discharged battery (and causes more)
  3. no, then hot wire the starter solenoid.
  4. cranks no ? then the starter is bad (bad cables)
    cranks yes, then the key line is dead.
if key line is dead, wiggle shifter, cranking, or try neutral,
neutral cranks work because the contacts are virgin there.
i guessed A/T tranny so if im wrong, do SAY !

Jul 04, 2014 | 1994 Geo Metro

1 Answer

Side curtain airbag replacment

yeah you can use them parts from your donor car, but when you install airbag and controller it has to be resetted anyway with some fault code reader. Better change the seat as well, they are integrated in the seat I dont think that will be easy to change seat airbag, but I could be wrong

Apr 14, 2014 | 2001 Buick LeSabre

1 Answer

How to jump start 2000 impala

Connect the battery to the battery of a donor vehicle with jump leads positive to positive and negative to negative, don't try to start the Impala, run the engine of the donor vehicle at a fast idle 2000rpm for about 10 minutes, then start the Impala. When it starts stop the engine of the donor but don't disconnect the leads for another ten minutes, this is to avoid an electrical spike to the electronics.

Dec 20, 2013 | Chevrolet Impala Cars & Trucks

1 Answer

Can u put jb weld on a breakline

I would not do that. This is the brake system. I would just look up on Craigslist someone parting out your model of Beretta....there a lot of models and years that you can use the donor vehicle brake lines from...

Oct 29, 2010 | 1993 Chevrolet Beretta

2 Answers

1984 volvo 244 auto/standard tranny-engine swap?

Totally forget about changing an automatic car to standard. That would be a very parts & labor intensive switch and is out of the question. If you have the same year and size engine this will be an easy swap. Just remove the donor engine leaving the bell housing and transmission in place in the donor car. Remove the engine from your car leaving the bell housing and transmission in place. Bolt the donor engine to your old bell housing and you are all set. Mark all connections as to not get confused. A digital camera will be of help in taking photos of how things are hooked up.

Sep 22, 2009 | 1984 Volvo 240 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides