Question about Cars & Trucks

Open Question

How remove f 16.. and the mean of f 16? Please help

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a mazda 626 samp


Do you mean the sump. If so remove the engine.

Apr 17, 2014 | Mazda 626 Cars & Trucks

1 Answer

Need a manual for esb 16 tanning bed free


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory installed systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Oct 11, 2012 | Cars & Trucks

1 Answer

I have a 1995 Lexus LS400 with persistant P0302 and P0308 misfire codes. Sparkplugs, wires, caps and rotors are new as is the timing belt. The same codes were set before and reset after the replacement of...


try removing and cleaning the mass air flow meter as this controls the fuel delivery if problem persists replacing the distributor might be the solution the pick up plate inside could be bad.

Nov 25, 2010 | 1995 Lexus LS 400

1 Answer

How do I get a battery out of a 2003 montana to change it, the posts are still connected to the cable how do I remove them. Any help be much appreciated Thanks David


Use a 5/16 wrench to remove the cables,remove the negative side first,then the positive cable.remove the fuse/relay box then the bar that is across the top of the battery,then there is a bolt that holds the battery in,like a 5/16,or a 13 mm socket head.If this was at all helpful,please rate,thank you.

Aug 15, 2010 | 2003 Pontiac Montana

2 Answers

My digital dash oil lvl is reading at 16% what does that stand for? 2006 Chevrolet cobalt LT coupe


Hello. What that means is that only 16% of your car's oil life remains before you should get an oil change. This is a better method of knowing when to change the oil than the old fashioned rule of thumb of merely changing the oil every 3,000 miles.
When you do have the oil changes, the counter can be reset back to 100%. If you have your oil changed at a garage, they will reset the counter for you. otherwise look in the owner manual for the instructions on how to reset the counter. regards, Joe
ps = kindly rate my answer as helpful. thanks.

Feb 11, 2010 | 2006 Chevrolet Cobalt

1 Answer

Tire size please


Laura, from factory the car came with 215 x 55 x 17``tires. The actual number is printed on the sidewall.
< This means you have 17`` rims, with 215 mm tire tread width and the sidewall height of the tire is equal to 55% of the tread width. This is referred to as the tires profile...
If by chance you are shopping for snow tires you can install a complete 16`` winter wheel set , tires and rims with the same overall outer diameter as a 17`` set, because the 16 or 17 only defines the hole size in the tire ....however the sidewall height and tread width would be different on a 16``tire.

Dec 08, 2009 | 2007 Lexus ES 350

1 Answer

I need to change the alternator on a 2001 ford focus and need to know what size wrench is needed to loosen the timing belt tensioner enough to remove the timing belt. Please help


I don`t know the size,but it will be metric.If you have a standard,american set of wrenches,get the one that is closest to fitting the bolt head.Here is something to help you decide what the actual metric size wrench to use.8mm is 5/16,,,10 mm is smaller than 3/8.11mm is a 7/16.12mm is larger than 7/16 but smaller than 1/2.13mm is 1/2,14mm is 9/16,15 is bigger than 9/16,but smaller than 5/8.,,5/8 is 16mm.17mm is 11/16,18mm is bigger than11/16,but smaller than3/4,19mm is 3/4.I hope this helps.

Oct 30, 2009 | Ford Focus Cars & Trucks

1 Answer

Brake trouble code on ford f250 - code 16


code 16 means system ok,check your KAM fuse (keep alive memory)it will most likely be blown,hope this helps

Oct 15, 2009 | 1997 Ford F250 SuperCab

1 Answer

1991 bmw 318is 4 door 16 valve motor, runs hot and radiator cold


you may have bad waterpump,the impeller on pump may be borken, just because it doesnt leak doesnt mean its good.also could have exhaust entering cooling system (bad headgasket) if pump is good have a block test done.

Sep 29, 2009 | BMW 318 Cars & Trucks

1 Answer

2006 mustang gt


This code means that the gas activated cylinders that tension the belts during a crash have gone off and need to be replaced

Aug 04, 2008 | 2006 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...