Question about Ford Cars & Trucks

2 Answers

I have a 2002 ford f150 crewcab and Im not getting any power to the fuel pump. Any suggestions?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,520 Answers

Back in the early SUV daze... Ford Motor Company started putting inertial fuel pump cut off SWITCHES on top of the passenger-side foot well... (side wall... in front of the door (typically)).

I have heard it is POSSIBLE TO CAUSE THESE SWITCHES to GO open WITHOUT PARKING YOUR Ford/Lincoln or Mercury
on it's roof.

There is a section in the OWNERS MANUAL dedicated to the reset procedure for EVERY such equipped VEHICLE.

Usually just a firm push on the top...

2002 FORD 150 5 4L V8 Electric Fuel Pump Inertia Switch RockAuto

More Information for AIRTEX WELLS 1S3906

https://www.bing.com/search?q=2002+f150+inertial+reset+video&form=EDGEAR&qs=PF&cvid=6908624d7c134c6db636348689910bea&pq=2002+f150+inertial+reset+video&PC=DCTE

Posted on Dec 11, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,585 Answers

Power comes from the ignition switch to the fuse panel. Do have power at both sides of the pump fuse? From the fuse it goes to the pump relay. Pull the relay. You should have power at 2 pins and ground at 2 pins. Jump the 2 large pins in the fuse panel. Check the pump plug for power it should be there. Check for power and ground in the plug, then check for power and ground at the body/frame.

Posted on Dec 11, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change fuel pump fuse 2002 ford f150


go to 2002 ford f150 owners manual and download it free from ford then go inside the manual to road side emergencies the fuse diagrams for the passenger and power distribution box are there and so is the fuse location also check for fuel inertia switch in case you got hit and press the reset button in and the car will start again

Feb 17, 2015 | 2002 Ford F150 Regular Cab

1 Answer

Have a 90 ford f250, have power in 1st, 2nd and well 3rd gears but in 4th & 5th can't get it to 50mph.


Timing needs to be checked. If your engine has a distruber, check to make sure its tight.

Dec 13, 2013 | 1990 Ford F150

1 Answer

I have an 2002 ford f150 won't start replaced fuel


Are you sure it is not getting fuel pressure, or not getting fuel spray from the injectors ?

Jul 13, 2013 | Cars & Trucks

1 Answer

How do you disable an ignition kill switch 2001 ford f150


I was told the Kill switch is the cause of my Ford F150 not starting. It sounds like it wants to turnover but there's no fuel going to my motor, fuel line is dry and they can't hear the fuel pump turning on.

May 12, 2010 | 2002 Ford F150 Regular Cab

1 Answer

I have a 2005 Ford F150 4x4 crewcab. I can not


Is the 4 wheel light flashing on the dash. If so the problem could be in the computer if it is electronic 4 wheel drive. It can also be the motor on the transfer case or the switch on the dash. You can check the switch on the dash and see if you are getting power to it and out of it. Then you can check and see if you are getting power to the motor on the transfer case. If you are getting power in the switch but none coming out of it when switch to the 4 wheel drive position it is the switch but if you are and are getting power down to the motor on the transfer case it is the motor on the transfer case. If you are not getting power to the switch then it is in the control computer for it mounted in the dash behind the radio.

Sep 13, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Im not getting power to my fuel pump on my 2003 ford explorer


u must check the relay which are connected to the fuel pump or u need to change the fuel pump

Jun 06, 2009 | 1990 Ford F150

1 Answer

I don't here the fuel pump ever kick on in my 1990 Ford F150, and I tested all of the fuses and they are good. I was thinking the relay for the fuel pump might be bad -- any suggestions?


It's under your hood, in one of those boxes, and should be marked. Your pump won't cut in if it's fried either. Check to see if there is power at the pump. Maybe you just have a loose wire. You can always hope!

May 20, 2009 | 1990 Ford F150

1 Answer

No power to fuel pump with new relay


check your ground to the ecm..the ecm controls all the relays

Dec 30, 2008 | 1994 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...