Question about Ford Festiva

1 Answer

Does this car have hydraulic lifters it it - Festiva Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Ford Expert
  • 157 Answers

IF it's fuel injected (1990-1993 and 1989 with automatic transmission) and IF it's the original engine then yes, the valve lifters (lash adjusters) will be hydraulic.

Also if you plan on keeping this car I would HIGHLY suggest, at the very least to get a Haynes repair manual. Also I would suggest joining the group @ Fordfestiva (dot) com. LOTS of very knowledgeable people on there.

Hope this helps.

Posted on Dec 12, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's tappet clearance gap for Nissan atlas with FD 42 engine


The FD 42 has hydraulic lifters no settings neccessary.

The FD42 has hydraulic lifters, no setting required. If it does not have hydraulic lifters, 0.40mm inl & exh hot

Aug 14, 2015 | Nissan Cars & Trucks

1 Answer

Hydraulic valve adjustment


The lifters are not supposed to be adjusted.
Each lifter is a small "engine" itself.
They are supposed to be self-adjusting (this was changed way back in the 1950's).
If you are determined to adjust them, you will need to contact a place that builds race car engines, because there are procedures race cars use that adjust them.
Oh yes, you can also replace hydraulic lifters with solid lifters.
Some race cars do, and that is because, at really high RPM's, lifters can :"float", causing the engine to "top out" and not go any faster. I had that happen on a car back in the 1970's.
Be blessed.

Mar 18, 2013 | 1995 Chevrolet K1500

1 Answer

Replace lifters for solid lifters zetec ford


You can't do this, the system is set up for hydraulic as far as the fuel injection control modules programming goes, also how would you adjust them, there is no provision for that on the engine you have.

Apr 06, 2012 | Ford Mondeo Cars & Trucks

2 Answers

Need instructions on how to change the lifters in my 1998 Chevy S10 2.2L


Please don't forget to rate!!!!

2.2L Engine When installing new lifters, a pre-lube should always be applied to the lifter body. It is also a good idea to prime hydraulic lifters by submerging them in clean engine oil and depressing the plunger using an old pushrod. This allows the internal components of the hydraulic lifter to coat with oil before initial operation in the engine. All lifters should be replaced when a new camshaft is installed.
If any valve train components (lifters, pushrods, rocker arms) are to be reused, they must be tagged or arranged during removal to assure installation in their original locations.
  1. Remove the rocker arm cover.
  2. Remove the cylinder head assembly from the engine.
  3. Remove the bolts retaining the lifter anti-rotation brackets, then remove the brackets.
  4. Remove the hydraulic roller lifters from the bores.
  5. Inspect the lifter and lifter bore for wear and scuffing. Examine the roller for freedom of movement and/or flat spots on the roller surface.

a3ab0ce.gif
Remove the bolts retaining the lifter anti-rotation brackets ...


bb0d44a.gif
... then remove the anti-rotation brackets


79533e9.gif
The lifters are located in bores in the engine block


a298166.gif
Use a lifter removal tool to remove the lifters from the bore

To install:
If installing a new lifter, coat the lifter body with a suitable camshaft pre-lube
  1. Install each hydraulic lifter to its bore being careful to align the flat sides (top) of the lifters with the flat sides of the anti-rotation brackets. When properly installed the flat sides of each lifter are aligned parallel to the anti-rotation bracket. The roller at the bottom of the lifter is parallel to the camshaft lobe.
Make sure to properly align and install each lifter as improper installation of the lifters or brackets could result in engine damage.
  1. Install the anti-rotation bracket retaining bolts and tighten to 97 inch lbs. (11 Nm).
  2. Install the cylinder head.
  3. Install the rocker arm cover.

d477687.gif
Removing the hydraulic roller lifter from the 2.2L engine

Feb 06, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

How do you tell good lifter from bad lifters in 97 Chevy Vortec 350


Most of the vortecs that i have worked on have hydraulic roller lifters, but i cant say for certain that your engine does, however i am sure that it has hydraulic lifters and they can be checked by trying to push them down in the center where the pushrods contact, if they compress easily the lifter is bad, If they are roller lifters, check for any wear on the roller and how well they turn, it is ok to have some side to side movement on the pin but any up/down movement on the roller is bad. If the are non-roller lifters check for wear, if the lifter looks "dished" or "concaved" rather than having flat surface replace the lifter.

Jan 23, 2010 | 1997 Chevrolet C1500

1 Answer

Does 2002 Jeep Grand Cherokee V8 have hydraulic lifters? I posted a question a few days ago regarding engine loud ticking which sounds like lifter noise. It doesn't have that deep sounding knock. I went to...


I would not believe any thing some parts store loser told you. Theres not a V8 built that doesnt have hydraulic lifters, unless its some fancy racin engine. It has hydraulic lifters, but unless you dont change your oil every 5k miles and/or use some cheap oil, there should be no problems. You should have a real mechanic look at it, and verify that you have good oil pressure. If it does, I would change the oil and use some MOBIL 1 and drive it, the oil will clean the lifters somewhat. If the eng has low oil pressure, that will need to be addressed.

Dec 19, 2009 | 2002 Jeep Grand Cherokee

3 Answers

Do the valves need periodic adjustments in a 1999 Chevy suburban and how many valves per cylinder


The valves never need adjusted, .Do to hydraulic lifters and zero clearance.The rocker arms are torqued to 35 ftlbs.So you never have to worry about it.If there is a noise have your lifters checked:)

Aug 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Tappet settings rangerover 2.5 dt


there is no tappet settings, they have hydraulic lifters.
if tapping its because of lack of oil changes.
the lifters are coked up and no oil fetting in.
try engine flush and new oil with hydraulic lifter additive.
if not a set of lifters.
i have got a complete head i can knick the lifters out of for £40 and the set is yours.

Apr 12, 2009 | 1995 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...