Question about Cars & Trucks

Open Question

How do i add HBOHD & MAXHD TO MY LINE UP - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WANT TO REPLACE POWER STEERING PRESSURE LINE ,HAS A HOLE IN LINE


Hello, This is a simple thing to do. The part can be ordered from an Aftermarket parts store or the Dealer. Just drain the fluid by disconnecting the lowest fluid line from the pump or pump reservoir. Then change the bad line.

Add new fluid and start the engine. Turn the wheels( best if jacked up or tires may be scoured) and move the steering wheel lock to lock. Add fluid up to the fill line and observe if the air bubbles are done.

Clean up any drips or spills and see if all the leaks are taken care of.

Jul 11, 2011 | Ford F-100 Cars & Trucks

1 Answer

How to check the oil


There is a dipstick in the front of the engine this should have a yellow handle on it. With the car off pull the dipstick out wipe it and reinstall it then pull out and inspect the end of the dipstick there will be a full line and a add line ensure its at the full line of not remove the oil cap which is on the top of engine says oil add small amounts of oil until its at the full line.

Nov 30, 2010 | 2006 Toyota Prius

1 Answer

Need to know where to add freeon at


Find the access ports. The large line is the Low side and that is where you will add freon. The small line is the high side and don't ever add freon through it.

Jun 23, 2010 | 1996 Pontiac Grand Am

3 Answers

WHERE DO I CHECK..ADD BRAKE FLUID


Hi:
when you open the hood, on the back wall on the drivers side is your brake fluid reservoir. It is a clear plastic tank with a black lid. Usually there is a line on the side to see the level of the brake fluid. If you can see the fluid is to the line, you are good to go. If it looks low, then you need to unlatch the lid and pour in brake fluid till it is at the full line

Nov 19, 2009 | 1997 Plymouth Voyager

1 Answer

How much brake fluid to add? I jjust changed my breaks and im going to bleed out the brake fluid, i just need to know how much i should add.


u add to the fill line in the mater cylinder fluid resovior, look on the side you will see a line, when you bleed have someone make sure it stays near that line, there is no speciific amount in ounces per say.

Aug 13, 2009 | 1995 Toyota 4Runner

1 Answer

Location for adding freon


add freon to low pressure side . low pressure side is large line with small fitting. high pressure line has a large fitting.

Apr 04, 2009 | 1999 Cadillac DeVille

1 Answer

Adding A/C to a 2003 Grand Caravan


A/C booster? Why are u adding such a product? Is your a/c working ok? You will want to add it to your low side valve which is the valve down by the side of the alternator. Look at your alternator (on the front side of the engine, closest the radiator). You will see an a/c line running next to it. THAT is your low pressure line. The fitting u see is where u add whatever u're adding. The high pressure side fitting is on the reciever/dryer. NEVER add anything in this line. Good luck.

Chris

Jul 25, 2008 | 2003 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...