Question about 2011 Ford F-450 Super Duty

2 Answers

How do I fix error code U0418 for 2011 Ford F-450 super-duty?

6.7L Engine

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,585 Answers

First is to look at all the fuses for the ABS system. Then have it scanned for codes, Fix these first. Could be sensors, could be wiring. If the scanner will not read codes or data from the ABS, then you'll need wiring diagrams and pin outs for the plugs. First is to check for power and ground at the plug. There are several to check. Next is continuity of the wires from module to module. Older U codes were no communications between computers. Today it can be that, but invalid could also be a bad sensor in the ABS system.

Posted on Dec 11, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 12,205 Answers

Well you better study up on vehicle communication networks . C.A.N - controller area network . How to Diagnose Controller Area Network CAN . Then your going to need factory service repair information . U0418 Ford Invalid Data Received From Brake System Control Module

Posted on Dec 11, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford e450 6.8l v10 gasoline engine light on,obd2 shows p0770 transmission solenoid e malfuction,how do i do now? thank you for your help


It means your transmission is starting to go out, and may not shift correctly.
What year is the E or F 450?
If it's still under warranty, the dealer will have to fix it for free.
If not, don't take it to a dealer, you'll need to take it to a professional auto mechanic and they'll either fix it or replace the transmission with a rebuilt one. Either way it's lots of money.

Jul 21, 2016 | 2008 Ford F 450 Super Duty

2 Answers

Engine leaking oil at top of block


Valve cover gaskets leaking? That's on top of the engine.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Sep 06, 2010 | 2008 Ford F 450 Super Duty

1 Answer

Trans will drive reverse but wont go forward


Solve Your 2001 Ford Super Duty F 450 Problem Now!

Jul 20, 2010 | 2001 Ford Super Duty F 450

1 Answer

Can't find flasher location


2001 Ford Truck F450 Super Duty P/U 4WD 6.8L EFI 10cyl the Flasher is located front seating area, driver side, under dash, mounted in fuse panel.

Also can check your 2001-Ford-F-450-Owners-Manual (page 170 and next for Fuse Description).

TY for using Fixya; hope this help (remember comment and rated this).

Apr 14, 2010 | 2001 Ford Super Duty F 450

1 Answer

Focus code u1262 . how can i fix the problem?


I read on a different thread that had the same issue and their fix was replacing the battery. Have your battery checked. The code was given during cranking and starting of the engine.

http://www.fordmondeo.org/forum/showtopic.php?tid/798078/

Mar 18, 2010 | 2001 Ford Super Duty F 450

1 Answer

Ford F550 supper duty not starting....


log onto autozone.com. you can look up troublecode chart right on that site and get the parts look up also

Mar 17, 2010 | 2009 Ford F-450 Super Duty

1 Answer

How to reset service soon light 2000 ford 450


The computer should have turned the light out if you installed a new sensor,unless you still have a faulty sensor,You need to have it put on a drb to check for current codes.

Nov 18, 2009 | 2001 Ford Super Duty F 450

1 Answer

I have a 1999 Ford F450 super duty diesel. It


Replace the glowplug relay.Its faulty.The glow plugs stay on until engine warms up.The engine temp switch then activates the relay to switch off.So it could be the temp switch also faulty.

Jul 17, 2009 | 1999 Ford Super Duty F 450

1 Answer

I have a 2002 Ford F450 super duty 7.3L . The turn signals are out. I do not have an owners manual. What is the location of the relay, in the fuse box?


Look on the lid on the back of the fusebox. There is usually a map of some kind with code words. Look for letters that best spell "turn signal" in short lettering.

Apr 27, 2009 | 2002 Ford Super Duty F 450

Not finding what you are looking for?
2011 Ford F-450 Super Duty Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...