Question about 2004 Hyundai Santa Fe
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.
Posted on Apr 17, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.
Posted on May 16, 2009
More maintenance history required. Did this happen ALL OF A SUDDEN? The possible causes are numerous (i.e., ignition, fuel, fuel pressure, vacuum leak, valve timing, timing belt, crank position sensor, bad plugs, bad ignition wires, ECM failure, Coil failure, wiring, injectors, fuel pump, and the list goes on and on and on. Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there. If not, then take/tow the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).
Posted on Jun 14, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Tips for a great answer:
Oct 11, 2017 | 2004 Hyundai Santa Fe
Nov 08, 2011 | 2004 Hyundai Santa Fe
Feb 08, 2011 | 2004 Hyundai Santa Fe
Dec 17, 2010 | 2002 Hyundai Santa Fe
Nov 21, 2010 | 2004 Hyundai Santa Fe
Aug 05, 2010 | 2001 Hyundai Santa Fe
May 29, 2009 | 2004 Hyundai Santa Fe
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: