Question about Cars & Trucks

Open Question

I need a serpentine belt diagram for a 2003 chevy impala with a 3.8 engine

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
breddi2
  • 126 Answers

SOURCE: serpentine belt

If you have purchased one call parts place and they can explain, if not when you get one ask them,< also check on bottom fron of hood or radiator cover, there is usualy diagram there.

Posted on Apr 25, 2009

Ad
  • 314 Answers

SOURCE: serpentine belt diagram for 2003 chevy impala

send an email to chuckie12_87@yahoo.com and I will send the diagram to you

Posted on Jun 23, 2009

  • 454 Answers

SOURCE: I need a serpentine belt diagram

It's under the hood, a white sticker, should be on top of the radiator.

Posted on Oct 07, 2009

  • 12 Answers

SOURCE: 95 chevy impala 5.7l serpentine belt diagram

If you will look under the hood around the radiator or on the underside of the hood it should be on a sticker there for you to look at.  

Posted on Dec 23, 2009

ZJLimited
  • 17970 Answers

SOURCE: Need to have belt diagram for serpentine belt for

2000 CHEVROLET IMPALA - V6 3.4L 207ci GAS FI N E

bfe9804.jpg


2000 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

0719873.jpg


Hope thats helped (remember rated this) Good luck.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for 2004 chevy impala serpentine belt


Which engine do you have ?
There should be a diagram on the hood or the radiator support.

Jul 28, 2012 | 2004 Chevrolet Impala

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    I need the serpentine belt diagram for a 3.8 2003 Impala.


    There should be a diagram of the belt routing under the hood somewhere. clay58_53.png

    Jul 03, 2011 | 2006 Chevrolet Impala

    2 Answers

    Need diagram for serpentine belt for chevy imo l s 2003


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    http://www.2carpros.com/car_repair_information/year/2003/make/chevrolet/model/impala/2003_chevrolet_impala_drive_belt_routing_diagram.htm

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    1 Answer

    Serpentine belt position


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    2 Answers

    Need to have belt diagram for serpentine belt for 2.8 2003 chevy impala


    2000 CHEVROLET IMPALA - V6 3.4L 207ci GAS FI N E

    bfe9804.jpg


    2000 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

    0719873.jpg


    Hope thats helped (remember rated this) Good luck.

    Jan 25, 2010 | 2000 Chevrolet Impala

    1 Answer

    95 chevy impala 5.7l serpentine belt diagram


    If you will look under the hood around the radiator or on the underside of the hood it should be on a sticker there for you to look at.  

    Dec 23, 2009 | 1995 Chevrolet Impala

    2 Answers

    Serpentine belt diagram for 2003 chevy impala


    send an email to chuckie12_87@yahoo.com and I will send the diagram to you

    Jun 23, 2009 | 2003 Chevrolet Impala

    1 Answer

    Serpentine belt


    If you have purchased one call parts place and they can explain, if not when you get one ask them,< also check on bottom fron of hood or radiator cover, there is usualy diagram there.

    Apr 25, 2009 | 2003 Chevrolet Impala

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    19 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...