Question about Ford Ranger

Open Question

How do I remove the 4wd shifter on a 86 Ranger

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 1996 Ford ranger 4wd

The brakelight activation switch on top of brake peddle had come loose,not allowing lights to come on and affecting circuit to 4wd selection switch. I fixed the brake peddle switch and it solved the problem.

Posted on Jun 30, 2008

Ad
virgils
  • 39 Answers

SOURCE: shifter knob removal

the shift knob is glued and pressed on, the best way to remove it intact is to heat the knob with a heat gun and pull straight up with a lot of force, please be very careful because when the knob finally releases there is very good chance that you can hit yourself in the face, if the knob is not to be used again you cut a **** up the side with a dremal tool,

Posted on Oct 13, 2008

glennsmart
  • 818 Answers

SOURCE: 86 Ford ranger 4wd II have to bleed fuel line every time Irestart truck e

It sounds as though air is finding its way into your fuel system, somehow. Air can be drawn in anywhere there is a union/connection/joint.

You may be correct about the fuel filter's quick release clamps being the cause of the problem, but do check the rest of the fuel line too.

Posted on Nov 03, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 ford ranger 4wd manual transmission will onl start when i pop start in 2nd gear


Check to make sure the safety switches are engaging. One on the clutch, one in the shifter and/or transmission.

Sep 14, 2017 | 1998 Ford Ranger SuperCab

1 Answer

When i start my 2005 Ford Ranger 4.0L 4wd It will not go from Park to Drive with the key in & on and your foot on the brake. what ever makes it release to move the shifter is not working... any Idea on...


Only 2 things could be wrong. The brake light switch mounted by the brake pedal arm or the shifter solenoid. Column shifter solenoids you can buy. But console shifters, you have to buy the entire shifter to get the solenoid.

Feb 24, 2015 | 2005 Ford Ranger

1 Answer

Ford ranger 4wd i have a 1996 ford ranger


Go to a junk yard and obtain a 1966 Ford Ranger transmission. Remove the old unit and do an exchange.

Aug 04, 2013 | Cars & Trucks

1 Answer

How do i remove the manual gear selector on a 93 ranger


remove the knob or slide the rubber boot up the shifter. there are 4 screws under the floor mat that hold the boot in place. after the boot you should see four more bolts holding the shifter in place, they are usually 10mm socket. remove them and remove shifter from the top of trans.

Feb 07, 2010 | 1993 Ford Ranger SuperCab

1 Answer

4wd not engaging on 86 s10 blazer


my 86 blazer did the same thing , check the vacuum lines on top of transfer case look for one that is chaffed or cracked. Another is the shifter linkage adjust, you will need a manual as it is set with a specific drill bit size to put in for alignment. it is easier than it sounds. hope this helps you

Jan 01, 2010 | 1986 Chevrolet S-10 Blazer

1 Answer

2000 Ford Ranger no 4wd lo


In order to get into 4 wheel drive low, make sure the shifter is in neutral before switching the dial to 4 wheel low. 4 wheel high and 2 wheel high can be switched into in park or in drive but 4 wheel low can only be obtained in neutral. If that does'nt work you may have an electrical or switch problem. Hope this helps. God bless!

Dec 01, 2009 | 2000 Ford Ranger SuperCab

1 Answer

My 86 toy 4x4 if u put it in 5th gear and hold it in it will stay but if u dont it pops in neutral ive been told its ashifter seat bushing. is that true?


Pull the shifter out and look, as there is a plastic "ball" at the end that may be worn out. Take off the shift boot inside the cab, and notice a collar around the shifter, push it down and turn counter clockwise to release it.

Oct 17, 2009 | 1986 Toyota Pickup 4WD

1 Answer

1987 Ford Ranger stuck in 4 wheel drive!!


Chances are the linkage for the transfer case is out of adjustment try loosening the adjuster bolt and put the 4WD shifter into the position 4WD high or low (depending upon which position it's lockup in) then lock down the adjuster bolt, try to shift out of 4wd sometimes you need to go forward and backward with the vehicle to get it out of 4wd, when you get it out of 4wd you may have to fine tune the adjustment to get it to engage and disengage smoothly it's a trial and error thing keep resetting adjuster until you get the desired effect.

Jul 02, 2009 | Ford Ranger Cars & Trucks

1 Answer

How to tell if 91 ford ranger 4x4 4wd button on


With the truck runing in park. Look to see if a light is on at the shifter or on the dash. Put it in L2 and take off it it lurges it is in 4X4.

Jun 05, 2009 | 1991 Ford Ranger Supercab

1 Answer

1996 Ford ranger 4wd


The brakelight activation switch on top of brake peddle had come loose,not allowing lights to come on and affecting circuit to 4wd selection switch. I fixed the brake peddle switch and it solved the problem.

Jun 29, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...