Question about 2005 Honda Pilot
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Further clarification on the O2 sensor location: It is in the exhaust pipe, under the center of the car, on top of the pipe, just aft of the oil filter.
Posted on Jul 14, 2008
Normally attached at opposite end of throttle linkage. Remove your air cleaner intake hose at throttle body, and observe throttle plate that opens & closes as you press accelerator, it will be at the end of that, on outside of housing.
Posted on Jan 10, 2009
These knock sensors are hard to get into. If thats a V6 it is underneath the intake manifold. make sure you cover the intake port when you take it apart, so a screw or a bolt don't accidentally drops in there.
Posted on Jun 28, 2009
The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.
Posted on Aug 22, 2009
The filter is attached to the top of the fuel pump. It can be accessed by pulling back the carpet in the rear storage area and removing an access panel
Posted on Oct 31, 2011
Tips for a great answer:
May 16, 2017 | Cars & Trucks
May 05, 2017 | Honda Cars & Trucks
Dec 09, 2016 | Cars & Trucks
Nov 18, 2015 | 2002 Ford Explorer
Jun 10, 2014 | 2005 Honda Pilot
Apr 05, 2014 | 2005 Ford Freestar
Mar 10, 2011 | Dodge Dakota Cars & Trucks
Nov 29, 2010 | 2000 Chevrolet Express Cargo
Mar 26, 2009 | 2005 Cadillac CTS
243 people viewed this question
Usually answered in minutes!