Question about Ford Cars & Trucks

1 Answer

Ford Eco 250 2010, having problems with the blower for heater. Will not run all the time.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Contributor
  • 28 Answers

Check for loose connections. The connector plug at the blower may be loose. Also check to make sure the blower it still getting ground connection. I would also check the fuse to assure it is fitting tight into it's slot. Also check to see if there is a relay inside the fuse panel to assure it is seated tightly. You should be able to check this to assure it is good by checking other relays in the fuse panel with the same model number. If so, try changing then around. A location diagram should be in the protective cover over the fuse panel. Hope this helps.

Posted on Dec 10, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a1999ford contour heater/ac don't work I have replaced the blowermoter and restister and check the bender door is working!! so why isn't the ac/heater working???????

By A/C an heater not working , you mean the blower motor isn't running an pushing air through ducts an vents . Before replacing parts did you look at a diagnostic flow chart an check power an ground to the blower motor . We test not guess ! Videos on youtube for testing blower motor circuits . Blower Motor Problems Auto Repair Help

Sep 26, 2016 | 1999 Ford Contour

1 Answer

I have a 1997 ford econoline van e150. The heater is not blowing hot air. I got a new switch motor but some told me it needs to be timed. I don't know how to do tht Please help

If the fan motor is not running & you replaced switch problem could be blower motor or blower motor speed resistor if you vehicle has one.
Check with auto parts store if your vehicle has a resistor.
I hav enever heard of timing for/of a blower motor or switch.

Nov 30, 2013 | Cars & Trucks

1 Answer

Heater vents blow blue smoke and smell of burnt leaves

Check you cabin filter it is under hood on pass side near wiper blades
If the blower motor is running fine and no smell from there.

Dec 14, 2011 | 1992 Ford Explorer

1 Answer

Ford windstar98 heater problem

its either 1 of 2 things. either your heater control is a lil faulty or the blower motor is going..up here in southern tier ny at napa the switch lists at $13 the blower motor now for the parts under the hood. main unit lists for around $42 the rear unit without the blower wheel lists around $43 and the whole thing assembled runs for about $120

(those prices are rounding UP to the next dollar i cannot verify if the prices are the same around your area. but NAPA can :-D )

Oct 18, 2009 | 1998 Ford Windstar

1 Answer

I have a 2000 ford E350 van with front and rear air. the front blower motor runs at low speed, The front blower still runs on low even when the knob is set on medium or high. I do not know where the...

it's either the blower motor switch or blower motor resister. Resistor ?Heater Blower Motor Switch Removal Remove the battery (10655) ; refer to Section 414-01 . Remove the battery tray. Remove the screws. Remove the battery tray. Disconnect the heater blower motor switch resistor connector. Remove the heater blower motor switch resistor (18591). Remove the two screws. Remove the heater blower motor switch resistor. ----------------------------------- Switches Removal Disconnect the battery ground cable. Remove the center trim panel; refer to Section 501-12 . Remove the control assembly. Remove the screws. Remove the control assembly. Remove the A/C-heater function selector switch knob. Disconnect the vacuum harness connector. Disconnect the A/C-heater function selector switch connector. Remove the A/C-heater function selector switch. Remove the screw. Remove the A/C-heater function selector switch. Remove the temperature control switch knob. Disconnect the temperature control switch connector. Remove the temperature control switch. Remove the screw. Remove the temperature control switch. Remove the heater blower motor switch knob. Disconnect the heater blower motor switch connector. Remove the heater blower motor switch (18578). Remove the screw. Remove the heater blower motor switch. ----------------------------

Mar 31, 2009 | 2007 Ford E-350 Super Duty Length XLT

2 Answers

1991 ford econoline heater problem

run a ground wire from the mounting plate bolt too the ground side of the battery

Feb 26, 2009 | 1991 Ford Econoline

1 Answer

Blower fan runs high only on 2006 Ford Explorer

if you have manual control climate control then the system has a blower motor resistor . if you have automatic climate control then the system has a blower motor speed control. in eather case the part is under the dash in the heater box. depending on the system you have, buy the part and then look under the dash for like part, you will half to remove the under dash panels to be able to see. the part will be on the heater box somewhare.

Jan 21, 2009 | 2006 Ford Explorer

2 Answers

Heater not working, blower does work but not hot

Sounds like Heater matrix blocked, check pipes going from engine bay into bulk head both should be getting hot if one is not then may be worth removing pipes and trying to flush it through as would be expensive to renew it as its a large job.

Dec 12, 2008 | 1998 Ford Contour

1 Answer

Car heater

i think you have a short in your blower motor. the resistor block which reduces also your speed could have damage also from the short of your blower.

tnx 4 using fixya,


Sep 17, 2008 | 2001 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5651 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides