Question about Cars & Trucks

2 Answers

How do I remove items from the cart that I don't want? Be specific!

In other words, this is the procedure: 1. 2. 3.

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 231 Answers

I'm guessing you mean online orders since your question seems to have nothing to do with cars.
I have found that most carts can be reviewed and there is usually a place on the list(next to or below each item) that offers two choices: Save for later, Remove. click the remove and it should disappear. Many will ask for confirmation: Y/N.
Usually you can open the cart by clicking on it and you will be offered a chance to change things when to you to the checkout.

Posted on Dec 10, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 8,204 Answers

You can modify an item in your Shopping Cart:

  1. To change the quantity, enter a number in the Quantity box and click Update. ...
  2. To remove an item from your Shopping Cart, click Delete.
  3. To wait until another day to buy some of the items in your Shopping Cart, click Save for later. Help: About the Shopping Cart How do remove items from the cart Google Search

Posted on Dec 10, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to get rid of items in my shopping cart I did not order

Go to your shopping cart, and delete the items in it. You can simply remove them

Sep 07, 2016 | Cars & Trucks

1 Answer

I ordered 3 items by mistake. How do I cancel 2?

Orders usually go into a shopping cart. Sometimes there is only a chance to remove items or modify quantities after arriving at the checkout.

Often it is simpler to use the wish list facility instead of putting stuff straight into the shopping cart.

If you can't modify your order then either simply don't complete by paying for it or cancel it and start again.
Customer services might be able to help further.

If all else fails you should be able to return unwanted goods, though as you "ordered in error" it is likely to cost you postage.

Dec 05, 2015 | Cars & Trucks

1 Answer

Need to remove 1/2 shaft 89 nazda 323 5spd se to replace shaft seal

Proper procedure would be specific to your Mazda. But, in general: 1) Loosen big axle nut with car on ground. 2)Place car front on jack stands, remove wheel. 3) Remove ball-joint from lower control arm to knuckle. 4) Remove tie rod end from knuckle. Knuckle and spindle assembly should now be free, only except hanging off of strut.5)Remove big axle nut and push axle out of knuckle. If it's stuck, try a solid piece of wood on end of axle, and a sharp hammer blow should free it. If that don't work, get a 2-jaw puller to remove axle from knuckle. Swing knuckle out and remove your half-shaft. May need to pry it from transmission, as may be held in by a small circlip. Careful you don't overextend the CV joints or they'll come apart. A big screwdriver between CV housing and transmission case should pry it out. When putting it back in (if there is a circlip on the transmission end) you need to hear it click or snap to verify circlip is seated. 6) Replace seal, and now you can put it back together. Tighten all removed nuts and bolts back to their proper torque. The big axle nut will take a lot of tightening-about 150-180 ft.lbs., so do that after car is back on ground. Done! One thing I forgot to mention: when you remove axle from transmission, fluid will come out, so have a drain pan ready. And top off transmission with proper fluid or gear oil when finished. Good luck. As said, procedure would be specific for your car, so I'm not positive you need to remove tie rod from knuckle.

Oct 20, 2011 | 1989 Mazda 323

1 Answer

Can i change the discs and pads on a 2003 jag s type 4.2 myself. I have been informed that only jag can do it because the pistons need resetting in the calipers, coz its an electronic brake system?? Is...

it's nearly identical to the lincoln LS, same platform

SECTION 206-00: Brake System 2003 Lincoln LS Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 03/17/2004
Front Disc Brake adobe.gif Printable View (243 KB)
Material Item Specification High Temperature Nickel Anti-Seize Lubricant
F6AZ-9L494-AA ESE-M12A4-A Brake Parts Cleaner
F6AZ-2C410-AB -
  1. Remove the parts in the order indicated in the following illustration and table.

    Item Part Number Description 1 - Bolts (Part of 2N386) 2 2N386 Guide pin/boot 3 2B120 Brake caliper assembly
    Removal Note
    Installation Note 4 2001 Brake pads
    Removal Note 5 2L200 Slippers 6 N808237-S101 Bolts 7 2B292 Brake caliper support bracket 8 1125 Brake disc
    Removal Note
    Installation Note 9 W701950-S100 Rivets 10 2C208 Brake disc shield
    Removal Note
  1. To install, reverse the removal procedure.
Item 3: Brake Caliper Assembly Removal Note
  1. Remove the caliper flow bolt and the 2 copper washers. Discard the copper washers.
Item 4: Brake Pads Removal Note
  1. Compress the disc brake pistons.
    • Use a wood block or used brake pad to protect pistons and boots.
Item 8: Brake Disc Removal Note
  1. If the brake disc will be reused, match-mark the hub and brake disc.
  1. ani_caut.gif CAUTION: If it is necessary to machine the brake disc, only use a hub-mount brake lathe.
    Measure the brake disc and resurface as necessary. Install a new brake disc if beyond specification.
Item 10: Brake Disc Shield Removal Note
  1. ani_caut.gif CAUTION: Use a 5.5 mm (0.22 in) drill. Do not exceed past a 6.0 mm (0.24 in) drill.
    Drill out the rivets.
Item 8: Brake Disc Installation Note
  1. Clean any rust or foreign material from the brake disc and wheel hub.
    • Use a suitable brake parts cleaner to clean the brake disc and hub surfaces.
    • Apply a suitable anti-seize lubricant to the hub flange.
Item 3: Brake Caliper Installation Note
  1. Install new copper washers.

Aug 04, 2011 | 2003 Jaguar S-Type

1 Answer

How to install the timing chain and get the main timing marker right

You can look here for the timing mark. As for the dis assembly procedure for the motor and all the items you need to remove in order to actually change the timing belt I recommend the Haynes or Chilton's repair manual on your vehicle. I say this because there are lots of items to be removed or replaced the heads have to be removed in a specific way in order to prevent damage and they have to be put back on in a specific way. If the belt broke while the engine was running you really need to have this head inspected for damage to the valves. the timing marks on the Crank and the Cam shaft will line up on two occasions. once when they are correct and once when they are exactly 180 degrees out of time. Make sure that when you set the cam shaft timing mark, the upper, that you look at both valves on the #1, they should both be closed fully otherwise you are not on the compression stroke. Good Luck.

Feb 24, 2011 | 2004 Honda Accord

1 Answer

1999 ezgo golf cart.need to know the whole wireing system for this cart. I put new batterys in and ihave a short somewhere cause know it want do nothing.the reverse beeper want come on nor will the cart...

When you removed the batteries, a certain procedure MUST be followed. Key switch off, switch to tow position and shift lever in reverse. You must wait until the beeper unit sound dies out then remove the wire from the most NEGATIVE cable. Place in Neutral before installing new batteries. There is a specific sequence to putting the batteries in an EZ-GO cart. Failure to follow this procedure will kill the controller. The Key switch must be off and the maintenance/tow switch MUST be in the tow position when connecting the batteries. Any of the above will cause the controller to fail, due to improper discharge of the PRE-Charge capacitors.

Dec 24, 2009 | 2006 AMC CJ7

1 Answer

Change headlight

hello. below is the procedure for removal of the headlamp for bulb replacement. to access the headlamp you will need to remove the bumper fascia. Callout Component Name 1 Front Compartment Sight Shield Plastic Retainers (Qty: 6) 2 Front Compartment Sight Shields (Qty: 3) Tip Each front compartment sight shield is serviced separately as needed for repairs Callout Component Name Preliminary Procedure Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . 1 Front Fascia Extension Plastic Retainers (Qty: 5) 2 Front Fascia Extension Callout Component Name Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the front compartment sight shields. Remove both front bumper fascia extensions. 1 Front Bumper Fascia Reinforcement Nut (Qty: 2) Tighten 6 N·m (53 lb in) 2 Front Bumper Fascia Callout Component Name Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the front bumper fascia. 1 Headlamp Nut (Qty: 1) Tighten 6 N·m (53 lb in) 2 Headlamp Bolts (Qty: 3) Tighten 6 N·m (53 lb in) 3 Headlamp Assembly

Jun 13, 2009 | 2003 Cadillac CTS

1 Answer

2004 Mercury Monterey left frnt window sector gear R&R proceedure

are you a techie? You need a heavy duty riveter to do this repair. May have to rent or borrow from auto store.

here's the procedure

Front Door Trim Panel s4w~us~en~file=adobe.gif~gen~ref.gif Printable View (251 KB) NOTE: LH side is shown. RH side is similar.
  1. Remove the parts in the order indicated in the following illustration and table.


  2. Item Part Number Description 1 23942/23943 Mirror access panel 2 1722897 Cup assembly 3 W56904-S424 Window regulator control switch panel screws 4 14A665 Window regulator control switch panel
    Removal Note 5 W701930-S424 Front door trim panel screw 6 W701930-S424 Front door trim panel screw 7 N602703-S61 Front door trim panel screw 8 1723943 Front door trim panel 9 W705590-S300 Nut insert(s)
  1. To install, reverse the removal procedure.
Item 4: Window Regulator Control Switch Panel Removal Note
  1. If equipped, disconnect the electrical connector(s).
Door Window Glass — Front s4w~us~en~file=adobe.gif~gen~ref.gif Printable View (328 KB)
Special Tool(s) s4w~us~en~file=st1132a.gif~gen~ref.gif Heavy Duty Riveter
501-D011 (D80L-23200-A)
  1. Remove the front door trim panel. For additional information, refer to Section 501-01 .
  1. Position the watershield aside.
  1. Remove the parts in the order indicated in the following illustration and table.

    To remove individual parts, only carry out the listed steps: Part Steps Front door window glass 1, 3 Front door window regulator 1-5 Front door glass run 1, 3, 6-8
Item Part Number Description 1 W706495-5100 Rivet (2 required)
Removal Note
Installation Note 2 N8621986 Nut (3 required) 3 21410 Front door window glass 4 W706495-5100 Rivet (4 required)
Removal Note
Installation Note 5 23200 Front door window regulator
Removal Note 6 N800507-S Bolt (2 required) 7 21596 Front door glass run 8 — Front door glass run (Part of 21596)
  1. To install, reverse the removal procedure.
Item 1: Rivet Removal Note
  1. Connect the window control switch.
  1. Connect the battery.
  1. Position the door window glass halfway down to gain access to the door window glass rivets.
    • Remove the rivets.
9391398.gif Item 4: Rivet Removal Removal Note
  1. Remove the rivets.
Item 5: Front Door Window Regulator Removal Note
  1. Disconnect the electrical connector.
  1. s4w~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Prior to power window motor removal, make sure the regulator arms are in a fixed position to prevent counterbalance spring unwind. Failure to place the regulator arms in a fixed position can cause the spring to suddenly release resulting in personal injury.
    NOTE: The counterbalance spring assists the window in the upward direction.
    Remove the bolts and the window regulator motor.
Item 4: Rivet Installation Note
  1. Using the special tool, install the rivets.

Feb 21, 2009 | 2004 Ford Freestar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides