Question about Cars & Trucks

1 Answer

I have a 1999 F-350 and I have to replace all the clearance lights due to damage. I believe I have to drop the headliner to gain access....correct. Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 15,557 Answers

If the fixture has screws you can access from the outside of the fixture, take those out and check for a pigtail that may be tucked under them. If there is no pigtail, there may be a hole that the wire is threaded through in the sheet metal. If there is none of that, then you may have to drop the headliner. Make sure if when you replace them that they are flat against the metal, use any grommets that are included and you may want to seal all the holes with clear silicon sealer.

Posted on Dec 10, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 F-350 and I have to replace all the clearance lights due to damage. I believe I have to drop the headliner to gain access...correct..thanks.


no you should be able to get to the screws when you take off the lenses because the screw nuts are inserted into the cab and the wires are put threw a hole under the mount

Dec 10, 2016 | Ford F-350 Cars & Trucks

1 Answer

Headliner for 1999 Buick LeSabre does not have a cardboard backing. What do I need to do to replace this headliner myself?


What kind of backing DOES it have. The fabric of the headliner cannot simply be glued to the roof frame. GM used a foam shell on many of its vehicles. Removal of the headliner must be done carefully to avoid breakage of the shell, although a small crack or two often is of no significance. Remove the old fabric by peeling it off the shell. This will usually leave a lot of the foam padding still clinging to the hard foam shell. This can be removed fairly easy with a vegetable brush, being careful not to gouge into the hard foam shell. There will still be a slight residue of the padding on the shell, but this is not a problem. At a fabric center, purchase a sufficient size piece of headliner fabric in a color that complements your interior. Ask the salesperson there to assist you in selecting the correct spray adhesive for the job. Dry fit the new headliner to the shell, leaving some extra on all sides that will be trimmed later. Fold back one half of the headliner fabric and apply the adhesive to both the shell and the back of the headliner fabric. Wait the specified time for the adhesive to prep, then, with assistance (its easier), roll the headliner back to the shell, ensuring no gaps or bubbles. Once you complete one half, fold back the other half and repeat. Cut any access holes needed (dome light, sun visor). Trim excess to edge of shell. Do not wrap the headliner around the side edges or it will not reinstall correctly. You may need to wrap the front and rear edges depending upon the trim on your interior. The edges will be hidden by the door and window trim. Reinstall shell.

Sep 10, 2016 | 1999 Buick LeSabre

1 Answer

How to replace electric sunroof rover25i 2004


In most cases you will have to remove headliner to gain access to sun roof...remove window from rail system.........good luck.

Aug 16, 2012 | Cars & Trucks

1 Answer

Rear brake light top not working


You must replace the whole light assembly in this year, the part is very expensive and a dealer only item if still avail (which I doubt). You need to drop the headliner down in the rear to access the light fixture assembly by removing the trim at rate of cargo area.

Jun 17, 2012 | 1996 Ford Explorer

1 Answer

Manual transmission fluid how to check level


On most front wheel drive transaxles......including your vehicle......there is a filler plug (17mm i think) half way up the gearbox.....

You can gain access from the top of the gearbox, if not (due to fans etc) you may have to jack up on all fours to get level and height clearance underneath.

Sep 24, 2010 | 1992 Honda Accord

2 Answers

Headliner Replacement


You'll need to remove all the plastic trim around the headliner and the plastic clips holding the headliner up. There are a few places on the internet to get replacement headliner material.

Apr 12, 2010 | 1991 Volkswagen Jetta

1 Answer

HOW DO I REPLACE CENTER BRAKE LIGHT BULB


this is not a bulb u must replace the entire LED fixture, to do this remove the inside trim at rear around rear hatch opening, then you will need to drop the headliner down to access the retainers that hold the third brake fixture in, very easy job.

Jul 09, 2009 | 1996 Ford Explorer

1 Answer

1995 isuzu 2.3 pickup broken timing belt


i believe that all motors are now 0 clearance valve trains,, this doesnnt allways mean that there is damage due to belt or timing falure

Mar 29, 2009 | 1995 Isuzu Pickup

1 Answer

Procedure to r&r oil pump


To remove the oil pump you will need to drop the oil pan to gain access to the oil pump. Difficulty depends on what engine is in the van and clearances available to remove the pan. But, basically an easy process if you have any mechanical skills and the correct tools for the process.
Be sure to prime the new oil pump before you install it or start the engine.

Jan 28, 2009 | Ford Econoline Cargo Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...