Question about Jaguar Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: jaguar x-type gear oil change
RedLine 75W140 Sythetic try this stuff if you cannot find it an any store then check here. http://www.shopmpt.com/redline/gear.html.
Those are manual transmission here is for auto matic.
Jaguar X-Type --Calls for the following fluid compatible specs... EssoLT 71141(BMW); Shell ATF 3403 M115; Shell M1375.4; MERCON V XT-5-QMATF; IDEMITSU K17; Jatco 3100 PL085
Or if you want the best bang for the buck:
1.Castrol Import Multi-Vehicle ATF(about $4/qt)
2. Valvoline Mercon V(about $5/qt)
You can find it at most local part stores...
Posted on Feb 05, 2009
Dip beam (outer) headlight
Open the bonnet.
Slide open the two spring clips (A) and remove the cover (B).
Press the spring clip inwards and push towards the bulb
to release the bulb and then remove the bulb from the light
unit. Pull the connector from the bulb.
Fit a new bulb to the connector, type H1 for dipped beam.
Fit the bulb to the light unit, the bulb will only correctly fit in
one position. Engage the spring clips to retain the bulb and then
fit the cover and retain using the two spring clips.
Close the bonnet.
Note: High Intensity Discharge (HID) Xenon light units,
type D2S 35W, are not renewable, contact your Dealer if the headligh fails to operate
Posted on Oct 07, 2009
jag-you-are would prefer that you take your car to one of their service centers!! probably has an internal filter element that needs special equip. to access and change out.lot of high end cars have that type of filter now. my brothers mercedes mid-1990s doesn't even have a tranny dip-stick! need special tools to check level! hard to be a 'shade-tree' mechanic anymore!
Posted on Nov 07, 2009
SOURCE: Jaguar x type 2004 front bumper
Front bumper removal is quite easy. To start with there is 4 10mm bolts one by each headlamp ( with the bonnet open) remov them. There is 3 T30 screws that hold the under tray to the subframe and there is also a small corner trim that is on the bumper side of the front wheel arch here is 3 T30 screws holding them on on each side. Finally remove the front wheel arch lining so you can get acsess to the inside of the bumper. You will then see a 10mm bolt towards the top of the bumper that is reversed to you. Remove then the bumper should then just pull away.
Becareful not to damage the fog lamp harness upon removal
Posted on Apr 24, 2010
Tips for a great answer:
Mar 12, 2018 | Cars & Trucks
Feb 23, 2013 | 2002 Jaguar X-Type
Dec 02, 2017 | 2002 Jaguar S-Type
Jan 08, 2011 | 2002 Jaguar X-Type
Nov 01, 2010 | 2002 Jaguar X-Type
Apr 28, 2009 | 2002 Jaguar X-Type
Dec 26, 2008 | 2003 Jaguar X-Type
Jul 03, 2008 | 2002 Jaguar S-Type
May 16, 2018 | Jaguar Cars & Trucks
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: