How to reset an airbag light - Cars & Trucks

https://mechanicbase.com/airbag/reset-airbag-light-without-scanner/
This might help.

If the Airbag light is on then unless the battery was disconnected you have a fault in the Airbag system and the control module turned on the warning light. There is no reset for a fault, you must read the code with a scan tool and repair the problem and then the light will go out.

You'll need to find out what code the computer sends to repair the system first. A diagnostic meter will tell you that. Once the system is repaired, the same meter will reset the light.

Fix the airbag system then reset the light with a scan tool.

If the airbag light is on, there is a failure in the airbag circuit, and your airbag may fail to deploy in the event of an accident.
There is no "reset." You will need to have your airbag system serviced.

Maybe you can use Airbag Reset Tools to reset an airbag light,good luck!

airbag light on means some DTCs stored in your airbag,
so you should get a airbag reset tool to do your car,meybe B800 BMW airbag reset tool can do your car.

This one's on me fella's.

Can't believe someone would charge $150 for that.

JediTrey00

The airbag light being on means there is a problem with that system. You will have to pull the code to pin point the area of the system having the problem and either repair it or have it repaired. You cannot reset an Airbag light without correcting the problem within the system.

reset by code reader but you may have a problem warning lights dont come on for nothing also if you have seatbelt restraints these are connected and it may be one of those, hope its of help.