Question about 1997 Isuzu Trooper

1 Answer

My son's 1997 Isuzu Trooper suddenly shifted "hard" and he limped home feeling like it was in 4L. Now it starts, engine runs fine, but it hardly goes (or doesn't) forward...but still can reverse. Any ideas b4 I call the tranny shop?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

One of the transmission speed sensors (input(TURBINE)shaft or the output shaft sensor has failed. There is usually a transmission based trouble code for this issue. You could try to go to a local autoparts store such as autozone and ask them to put their scanner on it and make note of the trouble code. If no codes are foound then I would go ahead and take it in to a transmission shop as they will have software/scan tool that will be able to pin point it mosre closely then the auto part store.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 isuzu trooper the transmision light flashes and it doesnt want to shift automaticly and seems to make engine run bad when light starts flashing


the name of this transmission is hydrAmatic not hydrOmatic it is made by General Motors , i cant find a reference to g14 ,look for serial number begining TH___ or 4L or 4T as these cover the age of your vehicle

Mar 29, 2014 | 1994 Isuzu Trooper

1 Answer

1994 Isuzu trooper very hard to start. acts like it flooded but when it finely starts it runs great and will restart every time. once cold it ether won't start or is very hard to start and acts like its...


Have a test done on the glo-plug system as it appears that they have burnt out and are not pre-heating the cylinders or providing a source of ignition for the atomised fuel from the injectors

Sep 15, 2013 | Isuzu Trooper Cars & Trucks

1 Answer

My 1997 isuzu trooper is so hard to start especially its first start-up and when it starts blows off white smoke


you dont say if this car is loosing water out of the coolent.white smoke points to a cyclinder head gasket ,if you could let me know more i will help you.adrian

Mar 16, 2011 | 1997 Isuzu Trooper

2 Answers

Have a code p0401 how do u fix it , I know it has something to do with the egr system but I,m not sure where its located on my trooper, engine size is 3.5 v6


I have a 2000 Isuzu Trooper that had a PO401 code that would reset and then 2 miles later the light was on again - I found if you remove the EGR valve and start the engine that the engine should idle rough - If it doesnt and you have vacumn at the intake port spray carb cleaner down the port slowly and see how long it takes for the engine to run rough - Keep spraying till the engine dies and spray some more down the passage and let the engine set for 5 minutes and then restart the engine - it will run rough at first but clear out - you should be able to feel the engine RPM change when you put your finger over the intake vaccumn port for the egr - If not then repeat the cleaning method again - If you do feel the rpm change then put the egr valve back on and clear the code and run your drive cycle to see if it is fixed.

Dec 17, 2009 | 2001 Isuzu Trooper

1 Answer

92 Isuzu Trooper front axel won't engage in 4H or 4L!


Sounds like your auto hubs need to be looked at.

Mar 10, 2009 | 1992 Isuzu Trooper

1 Answer

2002 Isuzu Trooper Transimission


Take back to dealer and ask them to put in trans shift additive. Worked for my 2001 Trooper.

Dec 08, 2008 | 2001 Isuzu Trooper

2 Answers

1997 isuzu wizard mu check light


Code 24 is a vehicle speed signal sensor fault, the sensor most likely does not provide a useable signal until about 25 MPH, when the computer doesn't see any signal after that speed it turns on the light. Make sense?

Sep 08, 2008 | 1997 Isuzu Oasis

Not finding what you are looking for?
1997 Isuzu Trooper Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...