Question about Opel Cars & Trucks

1 Answer

Nozzles on fueltank cover cracked and leaking , dealer only sell complete unit with petrolpump included , where can i find the a cover , new or second hand for opel corsa utillity 2007 1.4 sport

Posted by on

  • Johan Steyn
    Johan Steyn Dec 09, 2016

    I'm from South - Africa and need it urgently

  • swaffken Dec 09, 2016

    call LKQ THEY can get it for you



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 236 Answers

You can get a used one from pick-n-pull but you have to pull it off or you can try LKQ They have used parts and they will send it to your house.

Posted on Dec 09, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Speakers Stopped Working

yes!!! this is common on these!!! they leak from the lugage racks!!! you have to buy new speakers!!! but, you don't have tombuy them from the dealer, to expensive. i bought mine from a flea market that sells alot of radio stuff!!! works better than new!!! hope this helps ya!!!

Nov 29, 2013 | 2003 Chevrolet Tahoe

1 Answer

Will a canister purge vaule throw a oxgen sensor code

No, Each item has its own code more or less. A bad purge valve may give you a warning that the Evap system has a problem and this would include lines, tank, and the fuelcap. Sometimes the Code would be more specific naming the canister purge valve separately without including the lines, tank, or the fuelcap.

But the purge valve and the O2 sensors are completely different systems. The O2 sensors go on the exhaust and the purge valve is grouped with the fueltank. The comparision of the difference is like the purge valve belongs with the fueltank group and the O2 sensors belong with engine controls after the fuel system has finished its job.

I hope my solution is very helpful in explaining how each system is separate.

Jun 01, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

1997 nissan maxima. small oil leak. have read it could be rear main seal, oil pan gasket, sending unit,etc. (i have replaced the valve cover gasket) i am trying to sell and everything else is fine. is it...

sea foam makes an additive for reconditioning seals in the engine(rear main included)....cost about twelve dollars....use according to directions on package...then sell

Sep 18, 2010 | 1997 Nissan Maxima

1 Answer

How toreplace fuel injector chevy astro 1999

Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the fuel system pressure. Refer to the fuel system relief procedure in this section.
  3. Remove engine cover.
  4. Disconnect negative battery cable.
  5. Remove upper manifold assembly.
  6. Disconnect fuel meter body electrical connection and the fuel feed and return hoses from the engine fuel pipes.
  7. Remove poppet nozzle out of the casting socket by squeezing the nozzle locking tabs together.
  8. Remove fuel meter body by releasing the locktabs.
    NOTE Each injector is calibrated. When replacing the fuel injectors, be sure to replace it with the correct injector.
  9. Remove lower hold-down plate and nuts.
  10. While pulling the poppet nozzle tube downward, push with a small prytool down between the injector terminals and remove the injectors.

    0996b43f8022cb96.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the fuel meter assembly, including the injectors

To install:
  1. Lubricate the new injector O-ring seats with engine oil.
  2. Install o-rings on the injector.
  3. Install fuel injector into the fuel meter body injector socket.
  4. Install lower hold-down plate and nuts. Torque the nuts to 27 inch lbs. (3 Nm).
  5. Install fuel meter body assembly into the intake manifold. Torque the fuel meter bracket retainer bolts to 88 inch. lbs. (10 Nm).
    CAUTION To reduce the risk of fire or injury ensure that the poppet nozzles are properly seated and locked in their casting sockets.
  6. Install fuel meter body into the bracket and lock all the tabs in place.
  7. Install poppet nozzles into the casting sockets.
  8. Engage electrical connections.
  9. Install new o-ring seals on the fuel return and feed hoses.
  10. Connect fuel feed and return hoses and tighten the fuel pipe nuts to 22 ft. lbs. (30 Nm).
  11. Connect negative battery cable.
  12. Turn the ignition ON for 2 seconds and then turn it OFF for 10 seconds. Again turn the ignition ON and check for leaks.
  13. Install the engine cover.

Jan 20, 2010 | 1999 Chevrolet Astro

2 Answers

Cracked radiator what do i do

Its cheaper to replace than have repaired sorry I know yo didnt want to hear that but what it is is what it is

Dec 10, 2009 | 2002 Pontiac Grand Prix

2 Answers

I have a 2004 Kia Sorento that is leaking antifreeze. The leak is a few drips when the engine is running but pretty much pours out when the engine is shut off. The temp gauge does not show that the engine...

could be one of the two radiator hoses. There are also two hoses in back that go to the heater core. All of these connections attach to plastic nozzles on the radiator and also the ones on the heater core are plastic and can crack. Also check radiator condensor for leaks.

Jul 10, 2009 | 2004 Kia Sorento

1 Answer

Multiple Persistant Problems

That is a rip off.

A new and more recent car would be better off.

Sell this one and get a replacement instead of spending $8200 for repairs which will not likely end there.

Let the dealer sell it off or trade it in for you.

Rate this solution.

May 23, 2009 | 2004 Chevrolet Venture Passanger

1 Answer

Headlight covers

Nope - the headlights are sold as a complete unit - you can't just get a new lens from the dealer. Check out or eBay and see if someone is selling headlights from a car that is being parted out - that's your best bet cost-wise.

Aug 17, 2008 | 2001 Volkswagen Cabrio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Brad Brown

Level 3 Expert

17328 Answers

The Scrivener

Level 2 Expert

154 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides