Question about Volkswagen Polo
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
first clean throttle body out with carb cleaner and some clean cloth , if the throttle flap is dirty the car will stall
Posted on Apr 17, 2009
It is possible if there are codes in the ECU(computer)
which leads you to that conclusion.
And it's hard to tell you if your mechanic right or wrong without having the car for diagnostics.
There are many other causes for engine to loose power.
Posted on Jun 06, 2010
Hi, I have a 2001 polo 1.4 mpi it lackes power when you hit a hill it just dies, It has had new cat, fuel filter, fuel pump and throttle body, but is still the same it just dose not want to give me full rev's?
Posted on Apr 11, 2011
I would first test your washer pump ( squirter) by a 12 volt source such as battery take 2 wires one for negative and one for positive leads from your battery or other source of 12 volts to the leads on your pump if pump is bad it will not run, you can bypass the switch in the same manner only remove the switch connectors from switch and apply the power to your car connection. Mike
Posted on Dec 07, 2012
Tips for a great answer:
Sep 17, 2016 | Volkswagen Polo Cars & Trucks
Jan 01, 2016 | 2007 Chevrolet Trailblazer
Sep 24, 2013 | 2007 Volkswagen Polo 1.6
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
Aug 30, 2012 | Cars & Trucks
Jul 11, 2012 | Volkswagen Polo Cars & Trucks
Apr 16, 2012 | Volkswagen Polo Cars & Trucks
Sep 08, 2011 | Volkswagen Polo Cars & Trucks
Apr 14, 2009 | 2001 Volkswagen Golf
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: