Question about Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I looked the information up as you listed it and for a sedan and the yaw sensor is located under the center console assembly. Is mounted within a couple of brackets in the console. Click the link below to enlarge IMAGE.
Visit this link to look parts replacement:
- Toyota Parts" ' "Toyota Accessories"'1stToyotaParts.com
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Nov 21, 2012
SOURCE: reset yaw rate sensor
It is there for a reason and if you think that you can control a skid situation then do so. But a dealer spare will be costly so I would look around for an after market unit or one from the Toyota wreckers and have it fitted . It might just save your life.
Posted on Jan 07, 2014
Testimonial: "Thanks for the reply... I'm gonna take it to my local mechanic..."
Tips for a great answer:
Sep 18, 2017 | Ford Cars & Trucks
Apr 16, 2017 | Pontiac Cars & Trucks
Oct 15, 2015 | Cars & Trucks
The ability of the control modules to communicate through the serial data circuit
The identification of any stored diagnostic trouble codes (DTCs) and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
This Is going to be Greek to you probably ! This is where a up scale scan tool is needed , or a factory one ! Your going to need to have vehicle scanned for DTC'S diagnostic trouble codes ! Is the ABS light on as well ?
A sample of DTC'S
DTC C0186 00: Lateral Accelerometer Circuit
DTC C0186 5A: Lateral Accelerometer Circuit Erratic
DTC C0196 00: Yaw Rate Circuit
DTC C0196 5A: Yaw Rate Circuit Erratic
DTC C0252 00: VSES Sensor Uncorrelated
The Vehicle Stability Enhancement System (VSES) is activated by the electronic brake control module (EBCM) and calculates the desired yaw rate and comparing it to the actual yaw rate input. The desired yaw rate is calculated from measured steering wheel position, vehicle speed, and lateral acceleration. The difference between the desired yaw rate and actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. If the yaw rate error becomes to large, the EBCM will attempt to correct the vehicles yaw motion by applying differential braking to the left or right front wheel.
This is a problem you should take to the dealer or a ASE certified repair shop ! Or you can try to reset the system by disconnecting the battery cables an touching the cable ends together for 60 seconds ! But if there is a real fault in the system ( bad sensor ) The light will come back on ! Maybe not right away ! A couple of days or weeks etc....
Aug 04, 2015 | Cars & Trucks
Nov 21, 2012 | Cars & Trucks
Oct 04, 2011 | 2001 Toyota Sequoia
Jun 01, 2011 | 2001 Mercedes-Benz C-Class
214 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: