Question about 1998 Mercedes-Benz CLK

2 Answers

CLK 280 MBZ brake left lamp on indicator is being displayed

I have a 2007 CLK 280 MBZ.When I start the car I get themessage "brake left lamp is on:. I looked at the manual and dont know what to do with this and how to turn it off. It is not a warning signal.Plz help

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Its a warning that the light is stuck on
it could be caused by the earth or grounding is faulty may just need to remove bulb 7 put it bak in it may fix it & the warning should dissapear

Posted on Jul 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 772 Answers

My advice is to get someone to press the brake with ignision switched on,you have a look if there is no light then change the bulb job done,
if the light is permently on try changing the bulb before you start looking for bad earths.
best of luck.

Posted on Jan 10, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cylinder firing order for 2006 Mercedes 280 clk


I couldn't find clk 280 in my US database.
I did find 3.0L/2996 cc
The firing order for v6, 143625, 2006 model year. I figured no matter what model had this engine, the firing order would be the same, correct?

Apr 13, 2017 | Cars & Trucks

2 Answers

Eng code p0355 and p0305 2007 mbz ml350 eng runs rough but after restarting runs ok.


p0355 indicates that engine misfire is present.

p0305 indicates that the misfire is in the cylinder number 5

Have the spark plug tested/replaced and test the cylinder number 5 spark plug coil.

Jun 09, 2014 | 2007 Mercedes-Benz ML350

1 Answer

Rattling sound on acceleration and idle,passed smog recently. Have 2003 MBZ clk320


have the following checked:

1. ignition timing
2. valve lifters / tappets
3. rod bearings

May 18, 2012 | 2003 Mercedes-Benz CLK-Class

1 Answer

Changed pads on merc 280 clk and brake pad warning light is still on have not change wires is there reset or must i replace wires


If the brake sensors are rubbed through than you need to change the sensors in order for the light to go out.

Dec 01, 2010 | 2008 Mercedes-Benz Mercedes Benz Clk Class

1 Answer

When braking the dash lamp comes on and sounds and the display says either indicator faulty or left brake faulty


This indicates that your brake pads are worn bad enough for the warning light to come on. You need to have new pads put on the front before they dig into the rotors and have to have them turned as well. I would do this asap.
Sincerely,
Shastalaker7

Dec 30, 2009 | 2006 Peugeot 405

1 Answer

320 clk -98 what is the selusion when Bas-ESP-ABS is showing on my display? even the autodrive function is not working. Jesse


ABS--BAS

Most likely cause is the 'stop lamp switch'
It is a electric switch located on the brake pedal inside the car, about half way up on the brake pedal.
Pretty cheap too, I think the switch is only like $25 bucks.
2 connectors on the switch and then it turns out.
hope that helps

Jul 10, 2009 | 1998 Mercedes-Benz CLK

1 Answer

Recall Isuzu i-280


2006 ISUZU I-280 EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Recall Date: 04/27/2006 Summary: CERTAIN PICKUP TRUCKS MAY EXPERIENCE THE PERMANENT LOSS OF BRAKE LAMP FUNCTION OR BRAKE LAMPS THAT ARE ILLUMINATED AT ALL TIMES. THE CENTER HIGH-MOUNTED STOP LAMP (CHMSL) IS AFFECTED IN BOTH INSTANCES. ALSO, IF EQUIPPED, THE CRUISE CONTROL WILL BECOME INOPERATIVE. ANY TRAILER BRAKE LAMPS WHICH ARE CONNECTED TO THE VEHICLE'S BRAKE LAMP WIRING WILL MIMIC THE VEHICLE'S BRAKE LAMPS WHEN EITHER CONDITION OCCURS. Consequence: A FOLLOWING DRIVER MAY NOT KNOW WHEN THE BRAKES HAVE BEEN APPLIED, AND A REAR-END CRASH COULD OCCUR WITHOUT PRIOR WARNING. Remedy: DEALERS WILL REPLACE THE BRAKE LAMP SWITCH ASSEMBLY. THE RECALL BEGAN ON DECEMBER 5, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438; GMC AT 1-866-996-9463 OR ISUZU AT 1-800-255-6727. Potential Units Affected: 404733 Notes: ISUZU I-280 06030

May 18, 2008 | 2006 Isuzu i-280

Not finding what you are looking for?
1998 Mercedes-Benz CLK Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...