Question about Cars & Trucks

Open Question

How to remove head rests - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the head rest out the front seat of a 2003 BMW 745li


Hi, at the back of the seat you have 2 parts you have to take off
1) bottom pocket insert
2) and the insert that's at top of that witch is just below head rest.
3) once those 2 parts off you will see the head rest and motor. Theirs two pins, one on each side of the chrome arms. Pull pins out and head rest slides.

Sep 26, 2016 | 2003 BMW 745 Li

1 Answer

How to remove headrests on 2010 grand caravan


lift the head rest there is a tad that the head rest slide in squeeze the tad and pull up on the head rest.

Sep 19, 2012 | 2010 Dodge Grand Caravan

1 Answer

We need to remove the drives side head rest to install a seat cover, but we cannot figure out how to remove the head rest. How do you remove the driver's side head rest?


Head Restraints Removal
  1. Unscrew front seat head rest guide rod retainers (610A18) .
  1. Pull up on front seat back head restraint (611A08) . Compress foam in area of front seat head rest guide rod sleeves (610A16) .
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves .
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve .

    Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves .
  1. Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint .

9a4d433.gif

Aug 21, 2010 | 1998 Ford Taurus

1 Answer

How do you remove the head rest from a 2004 chevy cavalier


raise the head rest all the way up. look at the plastic grommets where the head rest slides in. one should have a small tab you push in the release the head rest while pulling up. good luck!

Aug 11, 2010 | 2004 Chevrolet Cavalier

1 Answer

How to remove the head restrain?


There should be a small hole in the tube near the base of the head rest. Stick a small nail or a pen in the hole to release the head rest.

Jul 14, 2010 | 2005 Chevrolet Cavalier

1 Answer

How do you remove head rest to put seat cover on ?


I think there are two screws one on each side after you raise the head rest take out the screws then the head rest should slide off

Jun 27, 2010 | 1999 Buick Regal

1 Answer

How to remove front head rest?


See attached picture. It really takes two people, one to push the releases and one to pull out the head rest. http://www.matthewsvolvosite.com/forums/download/file.php?id=1748&mode=view

Aug 01, 2009 | 2003 Volvo V70

1 Answer

How do you remove the headrest on a 1996 ford crown victoria?


Head Restraints Each front seat is equipped with dual-post design front seat back head restraint (611A08). The front seat back head restraint is installed as follows:
  • It travels on dual posts which have notches to engage a spring-loaded catch in the guide.
  • The front seat back spring assembly retains the front seat head rest guide rod sleeve (610A16).
  • The front seat back head restraint is adjustable from its normal position to a raised position of approximately 25 mm (1 inch).
  • Pull up on the front seat back head restraint to raise it. Pushing down will return it to its normal position.
----------------------------------------------------------------------------------------------

Removal
  1. Unscrew front seat head rest guide rod retainers (610A18).
  1. Pull up on front seat back head restraint (611A08). Compress foam in area of front seat head rest guide rod sleeves (610A16).
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves.
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve.

    Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint.

Mar 01, 2009 | 1996 Ford Crown Victoria

1 Answer

Headrest 2002 cavalier


Try this i found this at another site sounds like it should work


01. Sit in the rear seat facing the front seat you will be removing the head rest from
02. Lean the front seat back so you are looking down at the head rest
03. Pull the head rest up as far as it will go
04. Take a small flat head screwdriver and slide in into one of the holes surrounding the head rest poles
05. Move it around until you feel some resistance (if you're lucky, you might be able to move the fabric a little and actually see the clip you need to remove)
06. Wiggle the screw driver around until the clip pops out (it may take a while, but eventually it will pop out)
07. Repeat steps 4-6 for the second head rest pole
08. Once you get the head rest off, turn it upside down and you will see two very thin metal discs holding the seat belt guide onto the head rest, you need to remove these
09. Take a screwdriver and pry up on the discs
10. Once you get the discs up a little bit, put some soap on the head rest poles
11. Take a towel and start twisting the discs, continue doing this until they

Dec 29, 2008 | 2002 Chevrolet Cavalier Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...