Question about Pontiac Cars & Trucks

Open Question

I have a 2004 Pontiac GT why does a car go to Nutra when I push on the brakes ?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kirkx
  • 2019 Answers

SOURCE: Any special tools needed to replace rear disc

Yes. Rear disk brakes on all cars requires turning the piston while retracting.
There is always some sort of notches or holes allowing for some sort of tool to do this.
But you can always improvise something.
Or you can buy a universal kit for this from Harbor Freight.

Posted on Apr 22, 2010

Testimonial: "Thanks!"

candyappel9
  • 1 Answer

SOURCE: My 2004 pontiac grand prix gt is leaking alot of brake fluid!!!! What should i do first

stop driving the car.u have a leak somewhere.get it to the garage.

Posted on Sep 13, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 pontiac grand prix gt is leaking alot of brake fluid!!!! What should i do first


stop driving the car.u have a leak somewhere.get it to the garage.

Sep 13, 2015 | Pontiac Cars & Trucks

1 Answer

Just change the brakes on my 2005 Pontiac g6 GT ABS light is on traction control light is on in the wrench light is on


Did you unhook wheel speed sensors , did you push brake fluid back through the ABS modulator valve when collapsing the caliper pistons ? With those lights being on there are DTC'S stored in the EBCM - electronic brake control module ! you need to have a scan tool hooked up to check those codes ! Some auto part stores can check this for you , but watch out , there going to want to sell you parts right away .

May 29, 2015 | 2005 Pontiac G6 GT

1 Answer

No brake pressure


Sounds like a bad or empty Master cylinder or slave brake system leakage . Check the master for full brake fluid. Look for leaks at each wheel.
Maybe the system has to be bled.
Hope this helps.

Apr 02, 2014 | 2004 Pontiac Grand Am GT

1 Answer

2004 grand am brake lights are always on. I recently replaced my stock lights with led taillights and now the brake lights wont shut off even when the brake is not being applied


Their is a push button switch for brake lights on the brake pedal arm. when you push the pedal, it comes off the pedal arm. tis could be the problem

Jan 07, 2014 | Pontiac Grand Am Cars & Trucks

1 Answer

2005 pontiac grand prix gt. what size of a spanner tool do i need to push the pistion back in to caliper on the rear brakes


Just use one of the old break pads and a C-clamp of proper size like a 3-inch for compression on the cylinder.......Hope this helps.

Sep 25, 2010 | 2004 Pontiac Grand Prix

1 Answer

87 fiero gt


one of your runnin lights has grounded with one of the brake lights. try removing one bulb at a time and push the brakes to see where the problem is.

May 03, 2010 | 1987 Pontiac Fiero

2 Answers

Any special tools needed to replace rear disc brakes on a 2004 Pontiac Grand Am GT?


Yes. Rear disk brakes on all cars requires turning the piston while retracting.
There is always some sort of notches or holes allowing for some sort of tool to do this.
But you can always improvise something.
Or you can buy a universal kit for this from Harbor Freight.

Apr 22, 2010 | 2004 Pontiac Grand Am

1 Answer

ABS/TRACTION SYSTEM LIGHT COMES ON AFTER INSTALLATION OF BRAKES IN A 2005 PONTIAC GRAND PRIX GT


when you pushed caliper piston back dirty fluid traveled through the abs system causing valve to stick ,try bleeding the front brakes and resetting the computer.

Jan 15, 2010 | 2005 Pontiac Grand Prix

1 Answer

Could u tell me the exact location of abs sensor on pontiac 2004 grand am gt


The sensors are located on each wheel just behind the brake assembly. There should be a disc with an "eye" monitor and that will be the sensor

Aug 13, 2009 | 2004 Pontiac Grand Am

2 Answers

Rear brakes 2004 pontiac gp


On the rear calipers you need to screw the piston back into place. There is a tool nicknamed a rubik's cube. That will plug into the piston and you hook up a 3/8 inch ratchet and screw it back in while pushing inward. http://www.summitracing.com/parts/WMR-W80621

Jun 11, 2008 | 2004 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...