Question about Smart Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check fuel feed is ok and fuel pump pressure also check cold start injector could be running on this til warm.
Posted on Sep 16, 2008
The ASR (acceleration slip regulation) light is for the ETA (electronic throttle actuator) it is a mysterious beast that controls throttle placement. I would say that you have one of two problems. Either the interior insulation of the wiring of the ETA is is crumbling or the wiring harness is disintegrating. Either fix isn't cheap although if I had to pick one I'd pick the wiring harness. It's about a third of an ETA. In short check he wiring to the ETA, look for damage or water intrusion, if nothing is found you will have to replace the ETA control.
READ THIS POST FROM A M-BENZ FORUM MEMBER ON ASR ISSUE
For two years I lived with the the ASR light coming on shortly after starting the car and had to either continue driving it in the limp home mode, or stop the car to restart it to regain normal engine operation with the ASR light out. Finally, it got so bad I simply took a chance, after discussing the problem with a reputable local indie, and bought a rebuilt ETA from Potomac German Auto and put it in. The part had a one year warranty with it and was about half the cost of a new unit from MB. There are other companies out there that rebuild these units as well. At any rate the ASR problem went away. To give you a reference point, my car had about 156,000 miles on it when I did this repair. That may or may not be significant to your situation, and I probably should have corrected this problem well before I did, but I didn't.
Posted on Dec 31, 2008
It sounds like you have a vacuum leak somewhere between your valve and your source. A common vac leak that occurs on the 220 is at the vac. rubber y located at the back of the intake manifold. Follow your vac. line from the egr to the switchover valve and from the switch over valve to the source. Which is probably the y connecter
Posted on May 29, 2009
SOURCE: Smart Passion won't start
Check the battery in the remote as you should here a bleep in the car when the imoboliser is turned off we have the smart diagnostic computer svs 07923 479640
Posted on Jun 13, 2009
Tips for a great answer:
Mar 22, 2015 | 2005 Smart Cabrio Passion
Jan 28, 2015 | Cars & Trucks
Sep 01, 2013 | Cars & Trucks
Mar 12, 2013 | Cars & Trucks
Jun 11, 2017 | Mercedes-Benz C-Class Cars & Trucks
Sep 15, 2011 | 2008 Smart fortwo
Aug 26, 2010 | Mercedes-Benz ML-Class Cars & Trucks
Dec 11, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Apr 25, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: