Question about Cars & Trucks

Open Question

MUNCIE HS24 PTO COVER REPLACEMENT. WANT TO REMOVE PTO AND PUT COVER OVER ALLISON 3000RDS PTO OPENING. WHAT TO DO WITH TRANSMISSION TO PTO HOSES

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

1AAuto, Remove Install Muncie 4 Speed Transmission GTO Chevelle Skylark 442


<span style="font-weight: bold;">1AAuto,com Remove Install Muncie 4 Speed Transmission GTO Chevelle Skylark 442<br /><utube src="0mzg69kgKQI">(do not delete) </i></b><img src="utube.png" /><br /><br /><utube src="b3wKGhMbszc"><br /><br /><br /><br /><br /><br /></span>

on Jun 14, 2011 | Pontiac GTO Cars & Trucks

1 Answer

I need to know what kind of tranny fluid goes in a manual transmission on a 1989 gmc seirra with 305 its a stepside to. i put amsoil synthetic manual synchromesh transmission fluid in it but im worried...


Muncie 4 (117MM) speed---Lubricant Type---------80W-90 Gear Oil
Muncie 5LM60 (HM-290) 4 & 5 Speed ---------Lubricant Type------Syncromesh Trans Fluid T2850

Oil Capacity= 5 Speed (85mm & 109mm)--3.6 pt (US)
(New Venture Gear 4500)--8pt (US)

4 Speed= (85mm)--3.6pt (US)
(117mm)--8.4pt (US)


Hope this helped you ??

Jun 14, 2011 | 1989 GMC Sierra

1 Answer

Rebuilding 5 speed Muncie out of 88 beretta gt. Can't figure out how to split the housing. Separates about an inch then won't budge. Any tips??


muncie did not build a trans that was usded in this car, please verify transmission type, Gertag or Izusu 5 speed.

Mar 03, 2010 | Chevrolet Beretta Cars & Trucks

2 Answers

TYPE OF TRANSMISSION FLUID NEEDED FOR 97 CHEVY CAVALIER AND HOW MUCH


You can use Dexron II or Dexron III, but you can also use the improved Dexron VI which replaces both the afore mentioned fluids. Use Dexron VI as it is an improvment. Caution: Do not overfill. Check fluid level according to the instructions in your owner's manual and make sure the car is parked on a level surface or you will get a false reading.

Nov 16, 2009 | 1997 Chevrolet Cavalier

2 Answers

1997 z71 Transmission removal




  1. Disconnect the battery negative cable.
  2. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the range selector cable from the transmission bracket and from the transmission range select lever. Refer to Shift Cable Replacement .
  4. Remove the rear propeller shaft. Refer to Rear Propeller Shaft in Propeller Shaft.
  5. Support the transmission with a transmission jack.
  6. Remove the transfer case if equipped. Refer to the appropriate Transfer Case Replacement in Transfer Case:
  7. Transfer Case Replacement (Selectable Four Wheel Drive) . • Transfer Case Replacement (Auto Four Wheel Drive ) . • Transfer Case Replacement (Manual Four Wheel Drive) .
    102329.gif
    tif.gif
  8. Gasoline Engine--Remove the following components:
  9. 7.1. Two bolts 7.2. Two washers 7.3. One nut 7.4. The transmission to engine brace
    102332.gif
    tif.gif
  10. Diesel Engine--Remove the following components:
  11. 8.1. Two bolts 8.2. Two washers 8.3. One nut 8.4. The transmission to engine brace
  12. Remove the transmission rear mount.
  13. Remove the frame crossmember.
  14. Remove the exhaust pipe from the exhaust manifolds. Remove the muffler assembly from the exhaust pipe, if required. Refer to Exhaust System.

  15. 102208.gif
    tif.gif
  16. For the 5.0L Gasoline Engine: Remove the six bolts securing the converter cover to the transmission.
  17. Remove the starter. Refer to Starter Replacement in Engine Electrical.
  18. For the 4.3L Gasoline Engine: Remove the dust plug at the end of the starter mounting port in order to gain access to the converter bolts.

  19. 102335.gif
    tif.gif
  20. For the Diesel Engine and 7.4L/5.7L Engines: Remove the four bolts securing the converter cover to the transmission.
  21. Mark the flywheel and the torque converter alignment.

  22. 102211.gif
    tif.gif
  23. Remove the bolts that attach the torque converter to the engine flywheel.

  24. 102339.gif
    tif.gif
  25. Remove the transmission vent hose.
  26. Disconnect the wiring harness connectors from the vehicle speed sensors and from the park neutral position switch.
  27. Remove all vehicle electrical harness wires, harness clips, tubes, and brackets that may interfere with the removal of the transmission.
  28. Remove the fluid fill tube and the fill tube seal from the transmission. Refer to Filler Tube Replacement .
  29. Plug the fluid fill tube opening in the transmission.
  30. Disconnect the transmission oil cooler pipes from the transmission. Refer to the oil cooler pipe quick connect fittings removal procedure in Oil Cooler Hose/Pipe Replacement .
  31. Plug the transmission oil cooler pipe connectors in the transmission case.
  32. Install the J 21366 in order to keep the torque converter from sliding off of the transmission turbine shaft.
  33. Support the engine with a suitable jack stand before removing the transmission from the engine.

  34. 102341.gif
    tif.gif
  35. 5.0L and 5.7L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.

  36. 102343.gif
    tif.gif
  37. 4.3L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.
  38. Pull the transmission straight back from the engine.
  39. Lower the transmission using the transmission jack.
  40. Flush the transmission oil cooler and the pipes whenever you remove the transmission for overhaul, or replacement of the torque converter, the pump, or the transmission case. Refer to Transmission Fluid Cooler Flushing .
  41. Clean the transmission case using a solvent dampened cloth. Do not allow solvent to enter the transmission.
  42. Air dry the transmission.
  43. Clean all hardware and the flywheel cover using solvent. Air dry all the parts.
  44. Inspect all the components for wear and damage.
  45. Inspect all the seals and the fittings for signs of wear.
  46. Inspect the torque converter for stripped or broken weld nuts.
  47. Inspect the transmission case for cracks.

Jul 06, 2009 | 1997 Chevrolet K1500

1 Answer

Allison tranny shifts


No, have you changed the spin-on filter om the transmission yet? This may be the only trouble. I hope this helps. Good luck.

Apr 28, 2009 | 2001 GMC Sierra 2500HD

1 Answer

Pto on 2500 4 wd


Maybe aftermarket, but unlikely especially if it's not a current HD model. I've seen it on a 2001 2500HD but very rare. It has dash mounted controls. It would probably have to have an allison transmission. Just below, where the transmission rear output shaft comes out, there will be an attached pump with High Pressure lines coming out of it. If there is a cover plate there instead it might mean it's capable of having one but this is one of those questions like "If you have to ask, you probably don't have it"

Feb 17, 2009 | 1989 Chevrolet Silverado 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...