Question about 2001 Buick Park Avenue

1 Answer

2001 park ave just killed no reaso I have fuel on the rail where should I check to fix problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 11,460 Answers

Pull both spark plug wires off of the same coil , then have a helper crank the engine over . Do you see a spark jump from one coil tower to the other ? Checking the fuel pressure you need a fuel pressure gauge to do it correctly . How did you do it ? push the scarder valve and a little fuel came out . I wouldn't go by that , should have 53-59 psi) .Also if the SECURITY light is lit the PCM/ECM will disable the fuel injectors . Also timing gears have been known to wear out . Causing engine to become out of time . Had teflon cam gear and the teflon wears and the chain gets slack . Last buick i did with worn cam gear , the customer said they didn't hear any strange noise , it just quit running . I could tell just by listening to it being tried to start . Took timing chain cover off , timing gear was worn down to nothing . More bad news piston hit a valve an bent it . Just some food for thought .

Posted on Dec 08, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 park ave just killed on me wont start


Make sure battery has a full charge and battery connections all good. If it cranks good but won't start, have a helper crank it while you visually check for spark at the plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse. Having fuel in the fuel rail is good as far as it goes. You don't need rpm signal for initial prime.
Any applicable trouble codes?

Dec 08, 2016 | Cars & Trucks

1 Answer

Where is the fuel filter located on a 97 Buick park ave


The fuel filter is located under the hood on the passenger's side of the car. It is mounted to the frame rail near the lower engine area.

Read more : http://www.ehow.com/how_6715346_replace-park-avenue-fuel-filter.html

Aug 03, 2014 | 1997 Buick Park Avenue

1 Answer

2001 buick park ave stalls on first turn of key then starts on second


could be a weak fuel pump or a plugged fuel filter try a new fuel filter first

Oct 03, 2012 | 2001 Buick Park Avenue

2 Answers

96 buick park avenue wont start but turns ova theres no gas gettin to the engine


you probaly have a bad crank sensor. this will not let the fuel pump kick in if it goes bad

Apr 20, 2012 | 1996 Buick Park Avenue

1 Answer

How do I disconnect the fuel line from the fuel rail on a 1998 buick park ave?


ok
on the connector there are white tabs on each side 180 apart squeeze them together push down the pull off. that simple

Sep 30, 2010 | 1998 Buick Park Avenue

1 Answer

1991 buick park ave 3.8


reset the alarm/immobiliser.

Jul 11, 2010 | 1991 Buick Park Avenue

1 Answer

I have a 95 park ave 3800 oil pan was damaged due


Do you have power at the injector plugs with the key on?

Apr 22, 2010 | 1995 Buick Park Avenue

1 Answer

The location for the fuel filter on a 1992 buick park ave


Do believe, passenger side, along the frame rail, near the front of the car, by the subframe

Aug 31, 2009 | 1992 Buick Park Avenue

1 Answer

How do you check the fuel presure on a 1991 buick park ave?


You will need a fuel pressure gage that you can purchase any Auto parts store. The schradder valve is on the fuel rail. You may have to remove the plastic cover which should consist of a 10 mm wrench to access the valve. 37psi would be a good number to have...good luck.

Mar 17, 2009 | 1991 Buick Park Avenue

Not finding what you are looking for?
2001 Buick Park Avenue Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...