Question about 2014 Nissan Juke

Open Question

Labor time for main engine wiring harness install for a 2014 Nissan juke

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2002 Answers

SOURCE: 1997 nissan pickup stopped running with smell of

Those wires need to be replaced or repaired. They probably were rubbing together and shorted out, not uncommon in older vehicles. If you do it yourself, make sure you replace them with the same gauge (size) wire and use heat shrink tube on your joints. Do them one at a time so you get them hooked up right.
Once you get them repaired you may find other electrical problems that have occured because of it, it all depends on where they went.Hope this helps.

Posted on Aug 15, 2009

Ad
  • 14585 Answers

SOURCE: can a 1994 nissan altima wiring harness ,engine

Engine will, not sure about the harness. You can swap parts off the old engine.

Posted on Jul 02, 2011

  • 1915 Answers

SOURCE: The main harness that connects

honestly, replacing a harness is very labor intensive-but the quote you got sounds like a dealer quote-they will gouge you for a repair like that-get competing quotes from other sources and especially independent body shops. That is a really high cost for what is, at most, a $600 repair, and that is on the high end including the harness.

Posted on Sep 12, 2011

claudeinmo
  • 9098 Answers

SOURCE: Does anyone know anything about installation of a trailer wiring harness for a 2015 Nissan Pathfinder. I have installed the hitch and the rear trailer wiring but not the 12 pin wiring harness. Thanks

I KNOW OF 4 WIRE HITCH CONNECTION, WHY SO MANY WIRES?

Posted on Jun 20, 2015

  • 12650 Answers

SOURCE: Nissan Juke 2014 has shown up 2 engine warning lights on dash, any ideas what this could be indicating?

have vehicle scanned for trouble codes most auto stores offer this service for free the codes will give starting point towards repairing or correcting problem ---their are 100 s and 100s of codes or if under warranty bring in to dealer

Posted on Oct 23, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After finding out I need a knock sensor I'm learning that is becoming more complex what is the best way and where are the harnesses for the wiring on the relocation technique for the 97 Nissan Quest


You must remove the upper intake manifold (the sensors are under the manifold) on the engine, replace both sensors and the short sub wiring harnesses that goes to them from the main engine harness.

Jun 21, 2017 | Nissan Cars & Trucks

1 Answer

How much labor time to replace a main engine wiring harness in a 2014 Nissan juke


cant give an answer to that to many variables ---what harness [s] 1-2-all----- type of harness pcm--- bcm ----condition of work area working around fire damage / accident damage / rusted ----notify a body shop --dealer service dept --auto center -- or even an insurance agent they have access to cost and labor for repair broken down they can give you an answer as to the hourly time allowance to replace parts

Dec 08, 2016 | Nissan Cars & Trucks

2 Answers

Towbar wiring for 2015 nissan juke


Towbar wiring for 2015 nissan juke Juke's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 4-wire Flexo-Coil electrical cord.

Jun 06, 2016 | 2015 Nissan Juke

1 Answer

Should my Nissan Juke with 32,000 on it, just bought second hand, judder when I start it up. Its OK aprt from this annoying thing


My first guess...

If the start up instructions (USA ... I could NOT find) do NOT recommend a igniter warm-up period... you might want to just allow a long moment before hitting the starter...

Diesel engines run smoothly, reliably & economically if their igniters are treated properly...

If this is your first diesel... do the reading.

You & your engine will be happier.

https://owners.nissanusa.com/content/techpub/ManualsAndGuides/JUKE/2014/2014-JUKE-owner-manual.pdf

Apr 27, 2016 | Nissan Cars & Trucks

2 Answers

How much pag oil in 2014 juke


Can't give a answer with out a lot more information .

Mar 12, 2015 | 2014 Nissan Juke

1 Answer

Fault code p1650 and p651?


P651 is a referance code that is saying there is an open circuit on a sensor.
P1650 is to new for me to know for sure this is 2114 Nissan.
But it sounds like eighter an engine RPM problem or an MIL issue .
Likely some kind of a glitch the vehicle is two new must be under warranty take it to dealer it sounds like a mirnor problem

Mar 03, 2015 | 2014 Nissan Juke

1 Answer

Where can I get a radio wiring diagram?


Radio wiring color codes, radio wire color codes, radio wiring diagram, radio wire diagram, radio wiring harness, radio ...‎Radio Wire Harness and Colors - ‎Install Dr: Nissan Wiring

Mar 01, 2015 | 2014 Chrysler 200

1 Answer

Google wHAT IS THE SAFETY RECORD OF THE NISSAN JUKE


5 people were in one and went over a cliff,and you know the rest...

Aug 01, 2014 | 2014 Nissan Juke

1 Answer

How do you remove a 1999 Nissan Altima starter?


Nissan Car Altima & Sentra 1999-06 StarterRemoval & Installation
  1. Remove or disconnect the following:
    Negative battery cable Air duct Harness protector from the harness Starter wiring at the starter Starter-to-engine bolts Starter from the vehicle


  2. b53bb6c.jpg
    Fig. Starter location and mounting detail-3.0L Maxima with a manual transaxle


    b2eb267.jpg
    Fig. Starter location and mounting detail-3.5L Maxima

To install:
  1. Install or connect the following:
    Starter and torque the long bolt to 57-72 ft. lbs. (77-98 Nm) on Altima and Maxima and 41 ft. lbs. (55 Nm) on 350 Z. torque the short bolt to 22-30 ft. lbs. (30-41 Nm) Starter wiring Harness protector Air duct Negative battery cable
  1. Remove or disconnect the following:
    Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter

To install:
  1. Install or connect the following:
    Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable

1.6L & 2.0L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    Negative battery cable Wiring at the starter Bolts attaching the starter to the engine Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 70 inch lbs. (8 Nm) Starter electrical connections Negaative battery cable

1.6L, 1.8L & 2.0L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Wiring at the starter Bolts attaching the starter to the engine Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 70 inch lbs. (8 Nm) Starter electrical connections Negative battery cable

1.8L & 2.0L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Wiring at the starter Bolts attaching the starter to the engine Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 70 inch lbs. (8 Nm) Starter electrical connections Negative battery cable

2.4L & 2.5L Engines
  1. Remove or disconnect the following:
    Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable

2.4L Engine
  1. Remove or disconnect the following:
    Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable

2.5L Engine
  1. Remove or disconnect the following:
    Negative battery cable Air cleaner cover and duct Harness bracket Wiring at the starter Starter
To install:
  1. Install or connect the following:
    Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable

3.5L Engines
  1. Remove or disconnect the following:
    Negative battery cable Air cleaner case (upper) and air cleaner to electric throttle control actuator tube. Harness protector from the harness Starter wiring at the starter Starter-to-engine bolts Starter from the vehicle

    42c548c.jpg
    Fig. Starter location and mounting detail-3.5L engine

continue...

Apr 05, 2010 | 1999 Nissan Altima

Not finding what you are looking for?
2014 Nissan Juke Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...