Question about Cars & Trucks

Open Question

Transit immobiliser an d lift pump disable - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to bypass an immobiliser


you cannot disable the immobiliser. it is a system mercedes has put into to prevent theft. however, you can bypass the immobiliser (otherwise known as EIS, Electronic Ignition Switch) in order to switch ON the car, but you wont be able to start it.
what you need to do it remove the connector from the back of the EIS module and bridge terminals 15r and terminal 30. i recommend getting a wiring diagram specific to your car to be sure of the terminals.

however, do this at your own risk.

Aug 12, 2014 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Ford transit


It wont start unless you do something we call bleed. There is a small screw on the side of the injector pump you have to pull those and pump the lift pump/fuel pump untill all the air leaves the pump the close them and start.

Jul 12, 2014 | 1998 Ford Taurus

1 Answer

Disable immobiliser


Good sentence. If you're asking how to disable an immobiliser it's not a matter of just cutting some magical wire, they're designed to stop people from stealing cars. It can take a qualified auto electrician 1-4+ hrs to remove an immobiliser

Apr 20, 2014 | 2004 Nissan Primera Break

1 Answer

Car has immobiliser fault, want to disable immobiliser, what colour is the wire to immobiliser


If this immobilizer is a factory system, I don't think you can cut the wire and disable it. I think the computer will recognize it's disconnected and activate automatically.

Nov 10, 2013 | Isuzu Trooper Cars & Trucks

1 Answer

1997 ROLLS ROYCE SILVER SPUR, CRANKS BUT DOESN'T FIRE.NO POWER AT FUEL PUMP,FUSES ARE OK.NO PULSE AT COIL PACKS.DOES THIS MODEL HAVE AN IMMOBILISER? IT DOES HAVE FACTORY ALARM,BUT NO MENTION OF...


it has a relay that disables spark and fuel when a sensor on the motor detects combustion gasses in the water, this system only usually cuts in after some driving but you could have a faulty relay, Rolls are good with wire colours so follow the wire colour from the fuel pump to the relays (I had the problem with a customers 1995, rolls were unhelpful so I had to do it the hard way!)

Aug 24, 2010 | 1997 Rolls Royce Silver Spur

1 Answer

I have a peugeot 406 hdi executive with no handbook.The car wont start,I think i have immobiliser problem and i need to enter code into keypad.Where is the keypad located?


this car has no key pad as to new, after 1999 all pads are gone and its done through your key, is it cranking over ok, i suspect a faulty lift pump, you have to listen for a wine when you turn the key on, its the lift pump under rear seat.

Aug 16, 2009 | 2006 Peugeot 604

1 Answer

Need to disable the immobiliser on a starwaggon


google this:disable the immobiliser on a starwaggon

Mar 27, 2009 | 1989 Mitsubishi Starion

1 Answer

406 Peugeot fuel pump - Diesel


yes the control pad and the engine management are connected via a unit called the BSI this very expensive to replace around the $1500 AU price so you don't want to replace it if you dont have to the 406 had problems with immobilisers ecu which is able to be unpluged, most of the time this will solve the problem.
if need be tow the car to the dealer and ask them to unplug the imobiliser

Sep 09, 2008 | 1989 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...