Question about 2002 Saturn Sl
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Try this first, it takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself. Good luck and hope this helps, keep me posted, be glad to help
Posted on Jun 22, 2009
Take off, or loosen the front half of the wheel well. There will be 3 screws (7mm) and two trim clips There are two clips on the plastic piece just under the belt. Take those out, and you will have full access to the belt and the tensioner. The tensioner nut (so to speak) is 9/16, and cannot be accessed with a socket. Must use a wrench with a long handle. At that point, hook the wrench to the nut and turn it clockwise to loosen. Remove the belt, and replace it with a new one
Posted on Nov 22, 2009
well easiest way is to tape the old key near the ignition
without key you need to essentially re wire the ignition and under the hood arround the computer controlls and power supply
Posted on Jan 06, 2010
SOURCE: security light
Bypass the system completely. These antitheft systems are known for failing andcosting tons of money to fix. Go to this link for info and DO IT YOURSELF solutions.
Posted on Sep 07, 2011
Tips for a great answer:
Dec 08, 2016 | 2002 Saturn Sl
Feb 09, 2016 | 2002 Saturn L-Series
Sep 18, 2013 | 2000 Saturn SL
Aug 26, 2012 | 2000 Saturn SL
May 22, 2011 | 2007 Saturn VUE FWD 4
Sep 05, 2010 | 2002 Saturn Sl
Jul 28, 2010 | 2002 Saturn L-Series
Jul 13, 2010 | 2000 Saturn SL
Nov 08, 2009 | 2002 Saturn Sl
Oct 13, 2009 | 2002 Saturn S-Series
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: