Question about 1993 Dodge Stealth

1 Answer

I have a '91 stealth es. i need to know what distance should be from the clutch to the floor? Also i need to know how much free play the clutch should have. Mine has about an inch of free play.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Thats ok as long as the clutch is operating well
as all this adjustment is to stop the thrust bearing from staying in contact & spinning all the time thus wearing it out prematurely!
if you feal you need to get it a liitle higher thats ok too so long as you have FREE PLAY1/8 to 1/4inch should be ok!
Cheers Rob

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was driving my manual 91 dodge stealth home when i went to shift into 4th gear the clutch pedal went all the way to the floor and stuck and now it doesnt like to go into gear with the clutch in but it...


Clutch disk or pressure plate or both are worn out, and I would replace the throw out bearing. You can buy a kit at autozone or kragen that has everything all together 100-200 dollars.

Aug 10, 2013 | 1991 Dodge Stealth

1 Answer

Thrust bearing install direction


groove towards the spinning part; flat on stationary.

Mar 22, 2013 | Cars & Trucks

1 Answer

1993 DODGE STEALTH A/C CLUTCH NOT ENGUAGING


check play on cluch fork ecomend quarter inch play if to loose will not engage the pressure plate to clutch disc to tight always buring

Aug 25, 2012 | 1993 Dodge Stealth

1 Answer

Got a 91 Stealth ES manual, only 74xxxx on it. need some help.


i had same problem i replaced the slave cylinder and removed the hydraulic clutch dampiner right next to slave cylinder now no grinding plus quicker shifts operates like a performance clutch with out the cost. slave cylinder cost $25 there is a do it yourself video on you tube. must remove dampiner and rejoin hydraulic line with a connecter for the added performance.

Mar 07, 2012 | 1991 Dodge Stealth

1 Answer

Clutch Problems in 1993 dodge stealth


It is probably your clutch master cylnder or perhaps the slave cylnder...but it is definetly one of the two, and its best to replace both at the same time.

Dec 11, 2009 | 1993 Dodge Stealth

1 Answer

Clutch goes to floor will not engage


Bleeding won't fix it,If it can be put in gear and car doesn't move your clutch is no good.

May 28, 2009 | 1994 Dodge Stealth

2 Answers

Clutch goes to floor will not engage


The bleeder is located on the slave cylinder at the bell housing of the transmission. Follow the clutch pressure line down to the bell housing, and you will find the bleeder. To bleed the system properly, you will need to have someone push the clutch in, and hold it until you open the bleeder, and close it again. Repeat steps until you have a good solid clutch pedal. Make sure to not let the fluid level in the reservoir get too low as it can **** in air, and you have to start all over.

Mar 30, 2009 | 1994 Dodge Stealth

Not finding what you are looking for?
1993 Dodge Stealth Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...