Question about 2001 Hyundai XG300

Open Question

Hyundai XG 300 2001. reading a P1632 Engine code. Controller Area Network Bus, OFF. I know how (C.A.N) works I dont know how to fix it. HELP.

So the first code from check engine light is the(CAN bus OFF) but with that I now have fuel pump stuck ON, and Throttle Postion senor, and a enhance tration system valve stuck, open. I am guessing that becuase a module is broke or something from the CAN, that it is tripping/setting off the rest of the codes. How can i find the broke module? (BTW, i have read about how to diagnose a CAN prob PDF from online like twice now without a real answer to how i can fix it.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Service Engine soon light Code P0133

I just came from an Autozone, and then spoke with 2 Hyundai dealership service departments and they all three stated the P0113 code is the Intake Air Temperature sensor (IAT, also referred to as the Mass Air Pressure - MAP - sensor) on the engine, not an O2 sensor found in the exhaust system.

Posted on May 27, 2009

  • 14036 Answers

SOURCE: 2005 hyundai sonata - no warranty

go to autozone buy a repair manual.its about.$24.00 dollars.it will show you show you how to do your own repair.you go buy the egr valve and tps sensor.now on the egr valve make sure the port in the intake where the egr valve is not stop up with carbon.if so becareful and easy cleaning out the carbon using a piece of clothes rack .clean up the debris.reason so because egr valve is not cheap.i seen them from $250.00 and up.you dont want to buy one if you dont need it.

Posted on Jun 12, 2009

SOURCE: My 2002 hyundai check engine light is on and the

dear friend-the code P1529 means transmission control module(TCM)-communication problem,so please look at the following items-wiring,tcm,ecm,
just a hint if the transmission is slipping then the tcm is getting the wrong information from the input and out sensors.

Posted on Nov 06, 2009

ajarema
  • 404 Answers

SOURCE: my check engine light on my 2001 hyundai accent gl

Most of the time they mean:
p0441 = Evaporative Emission System Incorrect Purge Flow
p0422 =
Evaporative Emission Control System Leak Detected (small leak)

MOre info at http://www.obd-codes.com/p0442

Posted on Jan 10, 2010

  • 518 Answers

SOURCE: check engine light on code reads p2096 what

Fuel trim too lean. Usually means vacuum leak. Look for crushed,broken or melted off vacuum hoses near intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all vacuum hoses,intake manifold,egr valve see if idle raises if so you found leak. Repair. Could also be bad oxygen sensor switching bad o2 sensor but rarely.

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 explorer dies did crank and crank replaced fuel pump and starter now when starting instrument pannel goes blank


The first thing to do would be to have it checked for DTC'S - diagnostic trouble codes . Not at auto zone , thier diagnostic system can not pull codes from BCM - body control module or from the instrument cluster . Are you familiar with C.A.N . - controller area network ? All the control modules on your vehicle talk to one another on a serial data bus or network . Your vehicle has a number of these modules , PCM - engine computer , SJB - smart junction box , air bags , ABS , An someothers . All the instrument gauges and the lighting happen over this data bus .
How to Diagnose Controller Area Network CAN Your best bet mite be to take it to the dealer or some other qualified repair shop .

Apr 01, 2017 | 2006 Ford Explorer

1 Answer

2005 volvo xc90 will not stay running, it is giving a code of U0073 generic control module communication bus"a" off. .we have put in new crank sensor. the maf sensor is not the problem


Do you know what a serial data communication network is ? All the control modules on your vehicle share info on it . It stead of hard wiring all the componets on the vehicle they use control modules and a data network . U codes are problem codes assoicated with these networks . U0073 generic control module communication bus"a"OFF Has nothing to do with engine sensors ! Condition
The control modules transmit and receive information via a standardized serial communication method - CAN (Control Area Network).
The diagnostic trouble code (DTC) is stored if the control module detects that:
  • The control module does not have contact with the controller area network (CAN).
  • Incorrect value runs longer than 10 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
  • Starting the control module's CAN communication.
Note!The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met. In the event of system communication problems, it is not possible to communicate with the control module. Therefore it will only be possible to read off the fault if it is intermittent. Substitute value
  • None.
Possible source
  • Open-circuit in terminals.
  • Damaged Parking Assistance Module (PAM).
Fault symptom[s]
  • Parking Assistance System, malfunction
  • Information lamp is on
  • Message in information display

A shorted module will cause the data bus to short and cause no start condition . You best bet , take it to a qualified repair shop . How to Diagnose Controller Area Network CAN

Jan 06, 2017 | 2005 Volvo XC90

1 Answer

On my 05 Ford mustang v6, my fan only comes on when i turn my AC on and makes a funny noise when I turn the AC on, diagnostic test gave me a code, u1900, what does this mean and how do I fix it?


Where did you pull this code from ? What type scan tool did you use ,or was it a code reader ? Do you know about data communication networks on modern cars ? A U codes indicate a communication problem on the data network .
U1900 CAN Communication Bus Fault-Receive Error Audio Control Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error ABS Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error Instrument Cluster REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error SJB REFER to Section 418-00 . The thing that would make this easier to diagnose would be to have a factory scan tool or a professional grade . Need to know what modules can communicate with scan tool .Honestly ,Don't think you can fix this . Dealer or ASE certified repair shop .Do you know what C.A.N. - controller area network is ? The vehicle has 3 module communications networks:
  • high speed controller area network (CAN)
  • medium speed CAN
  • international standards organization (ISO) 9141 communications network
The diagnostic tool connects to the communications networks through the data link connector (DLC). The DLC allows a diagnostic tool access to diagnose and test the vehicle systems of any module on the communications networks.
All 3 communications networks are connected to the DLC. This makes diagnosis and testing of these systems easier by allowing one diagnostic tool to be able to diagnose and control any module on the 3 communications networks from one common connector. The DLC can be found under the instrument panel between the steering column and the driver door. Which module doesn't communicate with scan tool ?
Symptom Chart Condition Possible Sources Action
  • The anti-lock brake system (ABS) module does not respond to the diagnostic tool
  • Circuit or connection in the high speed controller area network (CAN)
  • ABS module
  • Go To Pinpoint Test A .
  • The audio unit does not respond to the diagnostic tool
  • Circuit or connection in the medium speed controller area network (CAN)
  • Audio unit
  • Go To Pinpoint Test B .
  • Circuit or connection in the medium speed controller area network (CAN)
  • Audio unit
  • Go To Pinpoint Test B .
  • The instrument cluster does not respond to the diagnostic tool - high speed controller area network (CAN)
  • Circuit or connection in the high speed CAN
  • Instrument cluster
  • Go To Pinpoint Test C .
  • The instrument cluster does not respond to the diagnostic tool - medium speed controller area network (CAN)
  • Circuit or connection in the medium speed CAN
  • Instrument cluster
  • Go To Pinpoint Test D .
  • The powertrain control module (PCM) does not respond to the diagnostic tool
  • Circuit or connection in the high speed controller area network (CAN)
  • PCM
  • Go To Pinpoint Test E .
  • The restraint control module (RCM) does not respond to the diagnostic tool
  • Circuit or connection in the international standards organization (ISO) 9141 communications network
  • RCM
  • Go To Pinpoint Test I .
  • The smart junction box (SJB) does not respond to the diagnostic tool
  • Circuit or connection in the medium speed controller area network (CAN)
  • SJB
  • Go To Pinpoint Test F .
  • No high speed controller area network (CAN) communication
  • Circuit or connection in the high speed CAN
  • High speed CAN modules
  • Go To Pinpoint Test G .
  • No medium speed controller area network (CAN) communication
  • Circuit or connection in the medium speed CAN
  • Medium speed CAN modules
  • Go To Pinpoint Test H .
  • No international standards organization (ISO) 9141 communications network communication
  • Circuit or connection in the ISO 9141 communications network circuit
  • Restraint control module (RCM)
  • Go To Pinpoint Test I .
  • No module/network communication - no power to the diagnostic tool
  • Data link connector (DLC) C251
  • Bussed electrical center (BEC) fuse 4 (30A)
  • Smart junction box (SJB) fuse 8 (10A)
  • Circuitry
  • Diagnostic tool
  • Go To Pinpoint Test J .

Apr 11, 2016 | Ford Cars & Trucks

1 Answer

What and where is the can c bus on a 2007 dodge ram 1500 5.7. Code u0001?


Can bus C is a serial data communication network that certain modules talk ,share information on ! There can be two or even three different bus networks - A , B , C . One being faster in speed of data transfer then the other ! There are two wire data bus's an single wire ones ! CAN- Controller Area Network is a two wire bus an the wires are twisted together to shield from noise interference . You code U0001 is a communication problem on the bus , a module isn't communicating ! How to Diagnose Controller Area Network CAN This is something best left to a trained technician !

Sep 02, 2015 | Dodge Cars & Trucks

1 Answer

What U1411 code means?


U1411 Implausible Fuel Volume Signal ReceivedPossible Causes Setting Conditions
CAN 'C' Bus circuit is open or shorted to ground
Cluster module has failed
FCM has failed
PCM has failed
Key on or engine running; and the PCM determined that the Fuel Volume signal it received was implausible.
This code sets in 1 Trip(s).
This code will turn on the MIL (Malfunction Indicator Lamp) Vehicle Application: 2005 Jeep Grand Cherokee Laredo 4.7L, Vin N, Eng Cfg V8

Customer Concern: Has 11 codes. U0101, U110C, U0121, P0480, U1120, U0103, U1411, U110E, P000B, U0100, U0002. At this time there is a no crank condition.
Tests/Procedures: 1. Clear the codes and see what comes back. These are all communication codes.
2. Disconnect the modules one at a time when it is acting up and see when the communication comes back.
Potential Causes: Controller Area Network (CAN) C Module

Tech Tips: On this vehicle it turned out the Occupant Restraint Controller (ORC) which is on the Controller Area Network (CAN) B bus was actually causing the problem. It was also taking down the Controller Area Network (CAN) C bus at times. I hope this helps.

Apr 01, 2015 | 2006 Jeep Liberty

1 Answer

C1130 code on my infinity what is the problem please help


I think from reading this description C1130 - INFINITI - Engine Signal 1 When Detected

Based on the signal from Engine Control Module (ECM), the Control Area Network (CAN)-Local Arear Network (LAN) converter (CLC) judges that the engine control system is malfunctioning.
There is a communication problem between the engine control module an another module on the CAN serial data bus. Problems with the data bus or the module can bring down the whole system ,make the vehicle not work properly or at all. Your best bet is get it to the dealer ! They have the tools to fix it.

ther

Jan 23, 2015 | Cars & Trucks

1 Answer

Hyundai Matrix error code U0003 and U0004 what do they mean?


hi, your not going to google a solution to your problem i'm afraid.
u0003 is area network positive open
u0004 is area network positive comm speed low.
in short a can bus fault.

have you checked the can ohms?
have you scoped the can bus?

jonrowe80@hotmail.co.uk

Aug 01, 2012 | Hyundai Cars & Trucks

1 Answer

I have a 203 caddilac cts,and codes #1779 1795 1780 po700, i would like to know what the codes are.


po700 Transmission Control Module Requested Malfunction Indicator Lamp Illumination, p1779Engine Torque Delivered To Transmission Control Module, Signal p1780 Engine Torque Reduction Signal Circuit p1795 Controller Area Network Bus Throttle Body Position

Sep 18, 2011 | Cadillac CTS Coupe Cars & Trucks

Not finding what you are looking for?
2001 Hyundai XG300 Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...