Question about 2006 Hyundai Elantra

Open Question

2006 hyundai elantra intake over advanced how to fix this

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: 2004 hyundai elantra that surges violently 1000 rpm to 4000 rpm

could be afew things. vacuum leak, one dud HT lead, could be the water temperature sensor, O2 sensor, best to get it checked and get it read for fault codes

Posted on Sep 03, 2009

SOURCE: Elantra's thermostat

dear friend:please look were the engine and gearbox joins together there is a housing were the radiator hose fits from the radiator,remove that housing and you will find the thermostat,

Posted on Sep 23, 2009

ZJLimited
  • 17970 Answers

SOURCE: need fil for error code P2626 Hyundai Elantra GLS

P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)

I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.

Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.

Hope this help (remember rated this post).

Posted on Mar 25, 2010

  • 564 Answers

SOURCE: Hyundai Elantra GLS 2003 starter does not work

it can if you have the proper tools and a little patience its not very hard at all it may be a little snug i cant remember off hand where the starter is located on that car but its relatively an easy fix.

Posted on May 21, 2010

  • 180 Answers

SOURCE: I need to know how

Remove the intake tube, maf, etc. Undo the fuel line into the rail. be careful fuel will spray if the car has recently ran. cover it with a rag to avoid spray. Remive any vacuum lines including the large one to the brake booster. Re,move the 2 coolant lines to the throttle body. There will be 2 supports that go to the block on the underside. Remove the bolts for those. Undo any plugs and harnesses in the general area. Remove the manifold. I believe it is 5 12mm bolts.

Posted on Feb 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

PO-139 I had that sensor change 3 weeks ago and the check engine light came on again this morning.Thanks


Probably replaced a good sensor. This codes could be from a bad sensor, a vacuum leak, or an exhaust leak before the sensor.

Dec 01, 2015 | 2006 Hyundai Tucson

1 Answer

I have a 2006 Hyundai elantra. After below zero temps last night my windshield wipers are not working. The first time I tried to turn them on it sounded like they tried to move. Now I don't even get that....


They were frozen the first time you tried them. You could have blown a fuse. The spray worked because you have the antifreeze fluid it the tank. So try the fuse first.

Feb 22, 2011 | 2006 Hyundai Elantra

1 Answer

I have 02 elantra that bent valves 2 times all ready and had it fixed at local machine shop but car still wont start and i am wonderin if its the valve clearence that the shop set on them but i dont know...


Clearance is NOT the issue. The Elantra engine I4 (2.0 lit) is an interference valve-.to-pinston clearance. If the valve timing to piston clearance is exceeded (wether advanced or retarded), the valves will 'kiss' the top of the pistons and get bent. Also verify 'INTAKE' & 'EXHAUST' cams have been installed proprely. Valve timing (timing marks at camshaft sprockets in reference to crank shaft sprocket) is essential. Also,.ensure proper timing belt tension.

Nov 11, 2010 | Hyundai Motor 2002 Elantra

2 Answers

Where is the starter located on a 2006 hyundai elantra


LOOK UNDER AIR FILTER.ITS BOLTED TO SIDE OF ENGINE NEXT TO TRANSAXLE.

Apr 11, 2010 | 2006 Hyundai Elantra

1 Answer

Where is a 06 hyundai elantra starter located


The starter in the 2001 model is under the intake manifold. I would check there first. Replacing it will require removing the air box and will take some contortions to get out if it's in the same place on yours. Are you sure that the starter is the problem because these usually don't fail (not to say it can't happen)? Hope this helps!

Mar 11, 2010 | 2006 Hyundai Elantra

1 Answer

Noisy engine suggesting cam belt prob at 50,000 miles


Do you mean the "Timing Belt"? There is NO Cam belt.. .there is, however, a "Cam Timing Chain"... connects the Intake & Exhaust cams together under the cam cover (valve cover). Unless you actually INSPECT the Timing Belt, no one can know... the noise might be anything! Valve tappets, timing belt Idler pully, tensioner pully, water pump bearing, you name it. Solution: Take vehicle into Hyundai Service Center - pay the diagnostic fee - they will give you an estimate of repairs (if needed) (parts, labor, tax, time-frame, etc.). This way you'll know if there's actually a problem and what it is, as well as what's required to fix it... OR that there's nothing at all wrong.

May 12, 2009 | 2006 Hyundai Elantra

1 Answer

Check Engine Light is On 2006 Hyundai Elantra 13,000 miles


An easy fix, if the check engine light is on find an Auto Advance, they can clear the code for you. Any auto parts store may be able to as well, Auto Zone is another one that may be able to help.

Nov 19, 2008 | 2001 Hyundai Elantra

1 Answer

Air intake temperature sensor


Can't locate the Intake Air Temp Sensor on my VW Beetle

Sep 19, 2008 | 2006 Hyundai Elantra

Not finding what you are looking for?
2006 Hyundai Elantra Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...