Question about 1987 Ford F 150

1 Answer

1987 fordf150 new fuel pump. i have fuel to the bleed valve on the rail but not into engine and frankly I do not know what to check after that. any suggestions would be appreciated

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers

Your injectors are clogged. Has it been sitting awhile

Posted on Dec 08, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to bleed fuel rail after installing new fuel pump on 2002 camry


should be a valve on the fuel rail look like a bike tire valve

Jan 13, 2016 | Cars & Trucks

2 Answers

93 ford ranger


Refresh my memory, What have you done to the car beside replacing fuel filter? Do you have a fully charged battery? Are you getting spark to all cylinders? Are you getting fuel? I can help you if you tell me what is wrong. Don't assume it's the fuel pump cause there is so much in between but we can see if your Fuel Pump is working. Open your gas tank and have someone turn the car on but without starting it. You should hear a hum for about 2 to 3 seconds.
This means your pump is working. Now you need to find out what is your fuel pressure? A good number is between 65Lbs. and 40 lbs.
Let me know how you make out I'll be on line all day today.

Jun 05, 2014 | 1993 Ford Ranger SuperCab

1 Answer

My Pontiac Sunbird 96 ran out of fuel. I need to know how to bleed the system of air. Where is the bleeding line??


you shouldn't need to bleed the air out-if you filled back up with fuel and its not starting you probably have a bad fuel pump-sorry- to bleed the fuel line look where the fuel line connects to the fuel injector rail-on the rail there should be a thing that looks like a tire inflator valve-turn the key on and push in the center of the valve and fuel should come out of it -if not then for sure pump isn't working- cheers Denny

Nov 27, 2013 | Cars & Trucks

1 Answer

.comFuel pump went out installed


Did you bleed air out of fuel system. There is a small valve in the fuel system near the fuel rail (top frt of engine). looks like a tire shrader valve but is in fuel line.

Aug 09, 2011 | 1993 Plymouth Voyager

2 Answers

1987 vanden plas won't start


The fuel has to be under pressure in the fuel rail. Quick check for the pressure: pinch off the fuel return line and get an assistant to crank the engine. If it starts....it needs a new check valve in the rail. Fuel is just circulating in a loop from the tank. No pressure being generated to enable fuel injectors to "fire".
If FP ok, then check the neutral sw in the trans selector hsng. if not operated when selector is in P or N engine will not start.

Check air flap in the throttle valve body is not stuck in open position. and is free to operate.The idle bleed /cold start valve needs the air flap to be operational.

Check connecting bellows between throttle body and inlet m'fold to ensure no air leaks. If leaking it will by-pass the control in the throttle body.

Not aware of your skills so for me to start getting into the other possibles would be a bit premature.

Jul 14, 2010 | 1987 Jaguar XJ6

2 Answers

Where is the fuel pump located on a 1987 ford 350 motorhome jambaree


On a 300cc / 4.9L has two fuel pumps both elec. one in gas tank and one on fram rail. On a 351 / 5.8L has one elec. fuel pump on fram rail and one mechanical type on drive side front of engine block.On 460/7.5L could have elec. fuel pump one on fram rail one in gas tank or mechanical type.Hope this was helpful. Let me know.

Dec 01, 2009 | 1987 Ford Econoline

2 Answers

Replaced fuel filter still wont start now what


need to chek what is missing spark or fuel for no start,if u think fuel pump tap on gas tank lightly and have samone starting sametime

Oct 31, 2009 | 1987 Ford Aerostar

1 Answer

1987 s10 blazer will start sometimes.Sometimes it will crank for a while ,then it will crank and feel like it ran out of fuel .Replaced fuel pu mp last year . cannot hear hum of pump ,but the truck starts.


Check Static Fuel Pressure engine off , Should be about 10 to 13 psi this will determine if Fuel Pressure Regulator is faulty , if pressure is bleeding off it will be hard starting... If you find a bad regulator then replace it with new... Bleed pressure off by removing fuel tank filler cap and by releiveing it at the fuel rail before the TBI unit....

Aug 18, 2009 | Chevrolet S 10 Cars & Trucks

1 Answer

Car ran fine one day, not it will crank but not


Your fuel system requires 35-45 PSI. If you don't have this pressure in the line then your fuel filter or fuel pump is at fault.

Jun 11, 2009 | 1987 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...