Question about Cars & Trucks

Open Question

Indicator relay is were - Cars & Trucks

Posted by on

  • kakima Dec 07, 2016

    Hi Praveen , I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

    What year, make, and model?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals not working what is the most common reason? besides the fuses


If the fuse is okay and the bulbs are okay, you have to suspect the 'flasher/indicator' relay which sends the shooting current to a particular bulb

Generic images for an indicator/flasher relay:

indicator relay Google Search

Mar 12, 2016 | Cars & Trucks

1 Answer

The indicator lights are all stuck on. AU Ford station wagon. Removed relay, and all fuses, but still on. Disconnected battery and they turned off. Reconnected battery and they all came back on with no...


The AU ford has two indicator relays , turning lights and hazard lights ,both use the indicator lights ,the hazards flash both front and rear lights , the turning indicator flashes one front and one rear light. I think the fault may be in the hazard circuit.

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

Where's the IndIcator relay swItch on a daewoo lanos


Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

May 29, 2012 | Daewoo Cars & Trucks

1 Answer

I have a 1987 jetta and i want to get my up shift light working again i hoping it is just a blown fuse?


It could be the upshift indicator control unit relay (relay #4, second row of relays, 4th from the right). There is also vacuum switch upshift indicator, (usually connected inline of the vacuum line going to the distributor advance, with an electrical plug connected to it). Or it could be transmission switch/upshift indicator, (located on top of the transmission, towards the back of the transmission). I don't think it would be a fuse, because the upshift control unit relay is powered by ignition battery.















Oct 29, 2010 | 1987 Volkswagen Jetta

1 Answer

My passat has a relay clicking in the dash especially after using the left indicator


The left/right indicator relay and hazard light relay is one unit built into the hazard light switch in the dash

Jan 27, 2010 | 2004 Volkswagen Passat

1 Answer

Right Indicator is frozen 'on'


switch is the relay replace switch

Jul 20, 2009 | 2001 Volvo V70

1 Answer

Relay still clicking afer indicating has finished


The indicator relay is built into the hazard switch. Remove it carefully by prising a small flat bladed screwdriver at each side of the switch

May 29, 2009 | 2002 Volkswagen Golf

2 Answers

Indicators not working for a daewoo lanos 1998 model.


If both indicators and hazard lights are not working, probably the indicator relay is broken.
Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

Jan 18, 2009 | Daewoo Lanos Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...