Question about 2001 Isuzu Rodeo
by DESIGN. (and in usa, its also the law here, fed gov, mandates)
Posted on Dec 07, 2016
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is no dipstick on your auto trans. Checking it is a real PITA The trans pan has 2 plugs in it. The one on the very bottom is the drain. The one in the corner, up higher in a recess is the check/fill plug. To check, the engine must be warm and running, tranny in P. Remove the plug and fluid should dribble out. If it doesn't it's low, fill until it dribbles out, while engine is running. Obviously the truck must be on a lift or up on jackstands.
Posted on Dec 22, 2008
check battery cables & terminals for tightness & corrosion.also check at starter.check starter bolts & actual starter for looseness.if no problems found your starter may be on its way out.next time it happens hit starter with hammer or heavy object if it starts right up get ready to replace it.good luck
Posted on May 23, 2009
either that or the ignition switch itself is binding up
Posted on Oct 27, 2009
Testimonial: "Thank you very much. That should do the trick"
check the electric fan conector plug some times is rusti scratchet whit a sharp scruwdriver remove the rusti or dirt on it this happens many times and step two check the relay and thats it (this is the first step a mecanic to search)
Posted on Feb 07, 2010
Tips for a great answer:
Oct 30, 2014 | 2001 Isuzu Rodeo
Jun 03, 2014 | 2001 Isuzu Rodeo
Mar 27, 2013 | 2001 Isuzu Rodeo
Sep 16, 2011 | 2001 Isuzu Rodeo
Jun 10, 2010 | 2001 Isuzu Rodeo
Mar 24, 2010 | 2001 Isuzu Rodeo
Mar 04, 2010 | 2001 Isuzu Rodeo
Nov 05, 2009 | 2001 Isuzu Rodeo
Jun 28, 2009 | 1999 Isuzu Rodeo
May 20, 2009 | 1999 Isuzu Rodeo
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: