Question about Cars & Trucks

1 Answer

I have a 7' Christmas ferris wheel I have one side that isn't lighting. I don't know if it needs a guse or if these a light bulb out. Please help me get the other side of it lit.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,760 Answers

Ive found the old fashion way of taking a good new bulb and going to each socket with it works , but takes a long time , but thanks to modern tech, they now sell these great little voltage detection pens (looks like a majic marker really) there not awfull expensive (less 20 bucks) and you just hold it near wire and run it along it till the voltage indicator goes out <that's your bad bulb or fuse !!! takes like 30 seconds to find it !!!

Posted on Dec 07, 2016


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


SOURCE: passenger side light and rear

check the fuses!

Posted on Oct 24, 2008

  • 840 Answers

SOURCE: 2004 Maxima driving / fog light bulb replacement

if they are near the bottom of the bumper the only way is take the lower shield off and drop the lt and rt splash shields

Posted on Jan 25, 2009

  • 44 Answers

SOURCE: Left Signal light isnt blinking on my 2000 300M Chrysler

you need to replace the rear driver side light bulb. it will fix the problem.

Posted on Feb 27, 2009

  • 4 Answers

SOURCE: tail lights dont work need

change bulbs check fuse

Posted on Mar 29, 2009

  • 710 Answers

SOURCE: i need to know how to get the tail light lens cover off to change signal bulb

Open hatch and on inside of body where the lens is are two horizontal screws going into the lens, remove them and pull the lens towards the back of the vehicle carefully. Good luck

Posted on Apr 27, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dashboard light on temp control switch does not light up on driver's side

turn on the lights & switch, smack the top of the dash a couple times.
if the light comes on..then you have a loose bulb in the back of the panel,
if not, the bulb is bad, consisting of removeing the cover for the instrument
cluster, removing the speedo head to get to the back side for bulb replacement..( make sure to disconnect the Battery before performing
this chore) i hope this helps !! Merry Christmas !!

Dec 11, 2011 | 2005 Chevrolet Impala

1 Answer

My drivers side backup light isn't working. I changed the bulb and it still doesn't work. Apparently there isn't a fuse for the backup light. Can anyone help?

If the other one is working then there is something wrong with the wireing between the two of them, or the connection in the light or the bulb contacts are dirty in the holder.

Nov 29, 2011 | 1999 Jeep Grand Cherokee

2 Answers

How to change ceiling light on Honda accord 2007

  • Hi, I can help.

  • To change your map light follow these steps.
  1. On the switch side of the light you just take a Flathead screwdriver and gently pry off that clear cover.
  2. Then pry the bulb out.
  3. Replace with bulb # DE3175
  4. Pop the cover back into place. Job complete.
  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using fixYa.

Regards, Tony

Sep 02, 2011 | 2007 Honda Accord Sedan

2 Answers

I have a problem with my 1978 chevy pickup tail light. It is the left tail light that doesnt work when I press and the brake and the signal. And the light bulb is good. but when i put on my parking lights...

the cheapest thing to do is change any and all bulbs in that tail light. if 1 is bad it can effect all of them. hopefully you don't have a short somewhere. but i would try the bulbs first, they're only a couple dollars and usually the problem. gl

Aug 06, 2011 | Chevrolet K2500 Cars & Trucks

2 Answers

Im looking for the fuse for the right tail light

You do not have a separate fuse for each side, if the left side works, replace the bulb in the right side that isn't working.

Jun 26, 2011 | 2002 Jaguar X-Type

1 Answer

BMW Z3 '97 speedometer light out how do I replace it?....thank you

if you are referring to the back light in the cluster, there are several 'Christmas' lights in the cluster. you can access this by removing the cluster which isn't too technical. how ever i like to remove the steering wheel as this makes it easier. you will need T-30 Torx driver. and a 23mm 1/2' socket. to remove the steering wheel. then its a few screws (cross or Philips which ever you prefer) and a couple of connectors and you can pull out the cluster to see which style bulb it is. usually there are 1-2 types of bulbs in there clusters.

Keep in mind there are 2 screws in the top of the trim around the cluster and 2 in the op of the cluster itself. there are 2 screws in the bottom of the trim and the cluster as well. if you do not remove the steering wheel it is quite a task removing the cluster but it is possible.

May 15, 2011 | 1997 BMW Z3 Roadster

1 Answer

Turn signal dosent work

you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Side marker lights do not work


No 1 ..Take the lenses off, and check the bulbs, and renew if necessary, check the bulb holder terminals for corrosion, if so spray with WD40 and clean, (with the lights off).

If this does not get them going , you will need a 12 volt test light, and test for live feed to the bulbs lamp holder, with the lights switched on.

Expect you will find corrosion is the problem.

Good Luck

Don´t forget to give a FixYa rating please !


Feb 03, 2009 | 2000 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides