Question about Cars & Trucks

Open Question

Where do you find the heater core on a 1990 topkick dump truck

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: Heater core 1990 Ford F-150

I believe this is the easiest heater core ever invented. If it is like the 1986 model. I believe it is. You take out the glove box door. The heater core is right there under a cover in the duct work.

Posted on Oct 13, 2008

Ad
  • 5 Answers

SOURCE: how do you take out the heater core in a 1990 thunderbird?

disconeck heater hoses under the hood on right side of motor and then inside car under dash remove the heater box on right and the core is inside,4-5 hour job.

Posted on Nov 28, 2008

dgjtex
  • 405 Answers

SOURCE: Heater wont work in my 1990 Chevy Truck

Several things can cause this (1) low coolant (2) bad coolant valve to heater core.(3) bad damper in duct.

Posted on Dec 27, 2008

  • 474 Answers

SOURCE: heater core replacement info for 1990 F150 truck

luckily most ford trucks are rather straigh forward. remove lines in the motor bay. remove glove box. you will see a cover with a lot of small bolts.remove and gently pry off. this should expose the core.it in turn pulls out.reverse dirictions for install

Posted on Jan 02, 2010

emissionwiz
  • 76846 Answers

SOURCE: will a detroit 8.3 from an 88 gmc dump fit into a 94 gmc topkick

Great question with no answer.

Posted on May 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heater core on a 1990 topkick dump truck


Inside the dash. H. Core is #47 in diagram.




26388320-2odv2gtmvffa0rbtog5evdpz-2-5.jpg

Dec 06, 2016 | Cars & Trucks

1 Answer

1990 nissan maxima. have replaced thermostat, but cant get any heat, or defrost. flushed out core.and replaced all fluids.


Check the hoses to the inside heater core for kinks. Check heater (not radiator) core for being plugged. Check heater valve to see if it lets coolant through when turned on.

Oct 16, 2014 | 1990 Nissan Maxima

1 Answer

1990 GMC TopKick Dump Truck Shutdown Issue


Electrical problem. Something gets hot and stops working. Could be fuel pump or something in the ignition system, so losing spark. After it stalls, spray starting fluid in the intake and try to start. If it fires up and runs a few seconds, you know it's a gas problem. If starting fluid doesn't do anything, check for spark, it's probably an ignition failure-possibly the coil or the ignition control module. The module can be tested at a parts store.

Dec 23, 2013 | Cars & Trucks

1 Answer

How do I change a Heater core on a 1990 Buick Century


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 26, 2010 | 1990 Buick Century

1 Answer

How to replace heater core on 1990 ford ranger


Remove the glove box door. Behind the glove box there will be a big plastic panel that contains the evaporator and the heater core. The heater core will be copper. That is the one you need to remove. Do not try to disconnect the aluminum one. That is for your AC. Remove the two heater hoses on the outside of the firewall that connect to the heater core and it will slide right out.

Mar 03, 2009 | 1990 Ford Ranger SuperCab

1 Answer

Heater core


It is a big job.  I had to move my dash aft several inches to access the heater core.  Lots of disassembly.  Chiltons, all data, or any manual are a big help.

Jan 02, 2009 | 1990 Mercury Grand Marquis

1 Answer

How do you take out the heater core in a 1990 thunderbird?


disconeck heater hoses under the hood on right side of motor and then inside car under dash remove the heater box on right and the core is inside,4-5 hour job.

Nov 28, 2008 | 1990 Ford Thunderbird

1 Answer

Heater core


Pull the panel under the glove box. You should be able to see the heater core. disconnect the two hoses under the hood on the firewall to the heater core. put a pan below to catch the antifreeze. Replace heater core. reconnect hoses.

Nov 15, 2008 | 1990 Buick Skylark

1 Answer

Heater core 1990 Ford F-150


I believe this is the easiest heater core ever invented. If it is like the 1986 model. I believe it is. You take out the glove box door. The heater core is right there under a cover in the duct work.

Oct 11, 2008 | 1990 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...