Question about 2004 Chevrolet Malibu

1 Answer

Where is the neutral safety switch on a2004 chevy Malibu, 3.5 L engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 12,543 Answers

The transmission range (TR) switch is part of the park/neutral position (PNP) and back-up lamp switch assembly (1), which is externally mounted on the transmission manual shaft. The TR switch contains four internal switches that indicate the transmission gear range selector lever position. The PCM supplies ignition voltage to each switch circuit. By grounding one or more of the switch circuits, the PCM detects the selected gear range by the state change of the switch input. Refer to Transmission Range Switch Logic . Switch input to the PCM is represented on the scan tool as HI and LOW. HI indicates an ignition voltage signal. LOW indicates a zero voltage signal. The four parameters represent transmission range switch signal A,B,C and Parity.

Look on transmission where the shifter cable hooks up !

Posted on Dec 06, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Tech jk
  • 102 Answers

SOURCE: need to locate the neutral safety switch on a 2005 chevy equinox

The park / neutral switch is on top of the transmission. It has a 2 wire connector. the wire colors are pink and orange/black. Tech jk

Posted on Dec 06, 2008

emissionwiz
  • 76848 Answers

SOURCE: Neutral Safety Switch Location

on the transmission where the shift cable attaches.

Posted on Jun 15, 2009

beest921
  • 23 Answers

SOURCE: where is the neutral safety switch no a chevy

Generally on GMs, if it's a column shift, it's down low on the steering column under the dash, and if it is a floor shift, it is at the base of the shifter, under the shifter housing. Look for purple wires or a purple wire and a yellow wire. I don't know what year your truck is. Hope this helps!

Posted on Jul 07, 2009

  • 1129 Answers

SOURCE: neutral safety switch

It is located on the side of the transmission, follow the shift cable down to it you will recognize it because it has a electrical wire comming off it and either a shift lever or shift cable going to it.

Posted on Jul 14, 2009

wracefans24
  • 1985 Answers

SOURCE: ocasionally engine (2004 malibu classic)wont turn

have you checked or replaced the starter relay?

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the neutral safety switch on a 2006 Chevy implala


hi Bobby.
this is all i could find.
see if this helps you out.
where is the neutral safety switch on 2006 chevy impala Google Search
or read this.
Where is the neutral safety switch? Column shifters have the neutral safety switch located on the of the transmission. Mechanical floor shifters have the neutral safety switch located on the of the transmission. Electronic floor shifters have the neutral safety switch in the shifter housing and a gear position switch on the transmission.11 Aug 2016

How to Replace a Neutral Safety Switch ' YourMechanic Advice

https://www.yourmechanic.com/.../how-to-replace-a-neutral-safety-switch-by-marvin-su... Search for: Where is the neutral safety switch?
or you could go to this link and it should help you out some more.
where is the neutral safety switch on 2006 chevy impala Google Search

Nov 22, 2017 | Cars & Trucks

1 Answer

2005 Chevy Malibu would'start. Put it in dive and back to start and it started.What is wrong that I have to do that.


Maybe a bad Neutral Safety Switch.
  • Neutral safety switch sends a signal to the on-board computer to allow the engine to start and to engage the transmission
  • When not replaced, vehicle may experience no start and/or transmission will not shift out of park.Here's a link to what it look's like.
Duralast Neutral Safety Switch SW5142 Read Reviews on Duralast SW5142

May 30, 2017 | Cars & Trucks

1 Answer

Where is the safety switch for a 2006 chevy malibu


Safety switch ? For what ? Park neutral safety switch ,is this what you mean ? Your vehicle not starting ? There is a lot more involved then just that switch.
Circuit Description
For ignition switch power modes refer to Body Control System Description and Operation. Once the ignition is placed in the Run/Crank position, the control circuit of the Run/Crank relay is grounded by the body control module (BCM). With the Run/Crank relay switch closed, battery positive voltage flows through it and on to the park/neutral position (PNP) switch. With the PNP switch in either the Park or Neutral position, battery positive voltage will flow to the starter relay coil supply voltage input terminal of the powertrain control module and the coil side of the starter relay. Placing the ignition in the START position sends a message to the engine control module (ECM)/powertrain control module (PCM) requesting engine start. If the ECM/PCM has determined that the transmission is in Park or Neutral and theft is not active, it will ground the control circuit of the starter relay. Battery positive voltage will then flow through the switch side of the starter relay to the S terminal of the starter solenoid, cranking the engine. For remote vehicle start (RVS) information, refer to Keyless Entry System Description and Operation.

May 25, 2016 | Cars & Trucks

1 Answer

Where is a neutral safety switch on a 2002 Chevy Malibu LS?


It is located on the top of the transmission. You should be able to get to it by removing the air box and intake pipe.

Dec 03, 2015 | Cars & Trucks

1 Answer

2002 chevy impala won't start if I jump starter


Is the security light on or flashing ?
The yellow wire goes from the key switch to the neutral safety switch, then to the starter. So bypassing the neutral safety would make the starter crank the engine, but would have nothing to do with the rest of the engine.

May 27, 2013 | Cars & Trucks

2 Answers

Where is the neutral saftey switch on an 2004 chevy cavalier


It should start in neutral position. Neutral safety switch is usually located under the shift console by the shift lever.

Mar 27, 2013 | 2004 Chevrolet Cavalier

1 Answer

Safety Neutral Switch Problem


I assume manual? There should be a switch at the clutch pedal

Jun 14, 2012 | 1990 Chevrolet Suburban

1 Answer

Neutral safety switch What is it. Son pulled key out of ignition with the tramission not in park.Can not even turn ignition switch over. Is the neutral safety switch the problem


A neutral safety switch will stop the path of battery power going to the starter motor if the gear shift isn't in park or neutral. I dont believe your issue is here, I would say the ignition lock assembly.

Aug 12, 2010 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2004 Chevrolet Malibu Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...