Question about Cars & Trucks

Open Question

Wind screen washer not working

Windscreen washer not working motor working if i squeeze pipe and let it go it will wash until i turn off and then it will not work again

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
maklean
  • 1665 Answers

SOURCE: Windscreen washer.

WASHER MOTOR 1. With the washer motor installed to the washer tank, fill the washer tank with washer fluid. 2. Attach the positive (+) lead from the battery to terminal 2, and negative (-) lead to terminal 1. 3. Check that the washer motor runs and washer fluid is ejected.50a9b90.gif SERVICE ADJUSTMENT PROCEDURES 1. Check the washer fluid contact point. 2. Adjust the washer fluid contact point by using a metal wire to move the washer nozzle ball.4a5c2e0.gif48e95c0.gif 3. If the amount of washer fluid is too small, check for clogged, bent or crushed washer piping. Check the chipped points too, because the tube might be crushed.

Posted on Jun 25, 2008

Ad

SOURCE: Windscreen Washer

If it is the same as some other Chevrolets they have 2 pumps attached to the side of the washer bottle. 1 for rear and 1 for front windscreen

Posted on Jul 31, 2008

  • 1 Answer

SOURCE: rear windscreen washer jet doesnt

try cleaning out the jet hole with a fine needle, this cured mine.

Posted on Feb 06, 2009

goofduck
  • 490 Answers

SOURCE: Hyundai Santa Fe Windscreen Washer Motor Fault

try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank

Posted on Apr 17, 2009

SOURCE: windscreen washer not working

The windscreen washer pump is in the washer-fluid tank.

Charlie

Posted on Sep 12, 2009

Testimonial: "Thanks for the advice, is this easy to get too?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windscreen washer on my renault megane 1999 doesnt work even though the motor is fine


try a fine needle and clean jets at screen .i find a strand out of a wire brush great for cleaning them

Oct 23, 2012 | Cars & Trucks

2 Answers

Windscreen washers stopped working. all fuses ok,wipers working ok.front & back washers not working


Hi, First check that you have wash liquid in tank. second make sure that it will not freeze by putting alcohol in your mix of water and soap. You can buy it already mixed at most service stations. Check pump for corosion on contacts.
Good luck.

Dec 15, 2011 | Honda Cars & Trucks

1 Answer

Windscreen washers not operating They are not frozen problem is at jet end ran a needle through jets and all clear Would the heated jets be damaged with frost as the pumped water is at end of jets and not...


Hi

A common problem, down to wind chill. Even with engine hot and the water being warmed up in the screen wash bottle, the jets are wind chilled. At 0°C and your driving at say 30 mph in the snow, the effective temp is - 8°C on the jets.

Firstly use winter screen wash, or full stength stuff, it usually says on the bottle, and will not freeze till minus 10°C or better.

In the morning pour warm water on the jet, not boiling and keep it way from the windscreen. If you can get the insulation they use on micro bore gas pipe, you could try that to help keep those unprotected washer hoses lagged.

Charlie @ http://www.theoffroadstore.co.uk/



Jan 12, 2010 | 1988 Land Rover Range Rover

1 Answer

98 Hyundai Accent, front windscreen wash not spraying Pump runnin


If you dont have access to compressed air and a blow gun , to blow down the jets, then use a needle and try to clear the jets, and then try the wshers, you will have to adjust the jets after. If you still have nothing, or it is very weak, then remove the pipe and blow down it , also with the pipe off, try the washer pump to see if it is pumping strongly, because, although the pump is working/making a noise, it may be too weak, in which case you will need to replace the pump.
Hope this helps

Dec 05, 2009 | Hyundai Motor 1998 Accent

2 Answers

Windscreen wash full, motor runs but little coming out of jets.


This may be because the motor employed for squirting the water is not functioning.Also check if the nozzle spraying the solution is not stuck.Insert a small pin into the nozzle and clean off any dirt stuck in it.Also the position of the nozzle can be adjusted by rotating the pin after insertin the pin into the nozzle.Also Check the pipe inside the reservoir if any dirt is stuck inside.also at times the the pipe connecting to the nozzle just under the bonnet may be loose or unconnected.So check all these.

Sep 28, 2009 | 1998 Honda Civic

2 Answers

How do I unblock BMW 320i windscreen washer?


Hi,

Put a cupful of something like cillit Bang in the reservoir, fill the system up with a hose pipe and leave the hose running. Operate the washers until the water runs clear. Turn the hose off and empty the reservoir. Refill with the correct concentration of screen wash, job done for about 10p!

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sep 18, 2009 | 2008 BMW 3 Series

1 Answer

Problem with windscreen washers on 1998 peugeot 406


The washer pipe comming from the tank to the jets is probably folding over of touching something between the bonnet and the check the pipe is in place where it folds with the going up and down

Aug 11, 2009 | 1991 Peugeot 405

1 Answer

Ford Taurus 1996-wind screen water squirter not working


You will need a test light/probe to check wether you have power to the windscreen washer bottle motor.If you have power at the motor and it doesnt pump you will need to replace it.Because the wipers are still working its unlikely to be a power supply issue.Can you hear the motor trying to pump when you activate it?If you can hear motor humming then you may have blocked nozzles.Usualy a small sewing needle poked down the squirter nozzles will clear them.Also make sure your water squirter hoses are not blocked and havnt fallen off.

Dec 08, 2008 | 1996 Ford Taurus

1 Answer

Windscreen washer.


WASHER MOTOR 1. With the washer motor installed to the washer tank, fill the washer tank with washer fluid. 2. Attach the positive (+) lead from the battery to terminal 2, and negative (-) lead to terminal 1. 3. Check that the washer motor runs and washer fluid is ejected.50a9b90.gif SERVICE ADJUSTMENT PROCEDURES 1. Check the washer fluid contact point. 2. Adjust the washer fluid contact point by using a metal wire to move the washer nozzle ball.4a5c2e0.gif48e95c0.gif 3. If the amount of washer fluid is too small, check for clogged, bent or crushed washer piping. Check the chipped points too, because the tube might be crushed.

Jun 25, 2008 | Hyundai Motor 1995 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...