Question about 2001 Hyundai Accent

Open Question

Clutch pedal wont depress 2001 hyundai accent manual

Changed master cylinder & put brand new slave cylinder on car,,bled any air out of system,continuious rock hard pedal now.thinking clutch throwout arm is broken or bent maybe ?.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
germcelchar
  • 389 Answers

SOURCE: 2002 Hyundai Accent won't go into gear.

Probably the arm that holds the rtelease bearing in the bell housing has slipped out of place. Get someone to depress the clutch while you check the arm is not loose. If the cylinders are working then its most likely the arm is disconected. If you are lucky you may get it put back in place by looking through the inspection hole but most likely you will have to seperate the engine and gearbox. Sorry I havent better news for you.

Posted on Aug 07, 2009

Ad
  • 4977 Answers

SOURCE: 2001. Why won't clutch pedal depress?

did you check the condition of the clutch, throw out bearing, clutch fork. any of these can cause this.

Posted on Aug 11, 2015

  • 19 Answers

SOURCE: how do I fix my clutch pedal

Sounds like the clutch release bearing (throwout bearing) is seized in place.

Posted on Sep 27, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Hyundai wont go in gear when i hit the clutch


if manual
collapsed pressure plate
worn clutch
hydraulic master or slave cylinder leaking
syncro internal transmission issue

if auto
low oil
torque converter collapse
gearbox solenoids or electronic fault
internal mechanical damage

e22313be-37e1-42f3-8c81-a7fa6a96fcfc.jpg

Jan 20, 2017 | Hyundai Cars & Trucks

1 Answer

Manual. Clutch pedal very soft. Sometimes pedal stays down. Unable to change gears until engine stalls or is turned off. Worse in very cold weather. Fluid level OK.


the master cylinder that operates both the clutch and brakes is either bad or needs bled,or could be leak in either brakes or clutch slave cylinder

Mar 10, 2016 | 2013 Hyundai Accent

1 Answer

I have a 2000 mazda 323 with a manual transmission. i have already change the clutch kit but the gear is still hard to shift


Check the hydraulic clutch operation. This is a clutch master cylinder with a reservoir on the firewall, and a clutch slave cylinder down on the bell housing of the transmission, with a steel tube running from the master to the slave cylinder. When clutch pedal is depressed, hydraulic fluid (brake fluid) is forced from the master to the slave. The slave cylinder should push out a little plunger that contacts the clutch fork lever-pushing it forward to engage the clutch.
Add brake fluid to the reservoir if needed. Watch the plunger on the slave cylinder: if it moves little, or not enough, try bleeding the slave from the bleeder valve. They are bled just like brakes. If bleeding doesn't help, your clutch master or the slave may need replacing. The master cylinder, like a brake master, has internal seals that hold hydraulic pressure, so force can be applied to the plunger on the slave cylinder.

Dec 09, 2013 | Mazda 323 Cars & Trucks

2 Answers

Fixed a master cylinder and slave cylinder on 2000 s10 pickup now i have no pressure on clutch what is the problem


The air needs to be bled out of system. Should have a "bleeder" on the slave cylinder resevoir. Fill 1st and open bleeder screw. Have someone push clutch pedal down and close bleeder when pedal is fully depressed. Do not pump pedal. Repeat until a steady stream of fluid is achieved. REMEMBER TO WATCH RESEVOIR LEVEL AND KEEP FULL DURING THIS PROCESS!!!! Top off when finished bleeding. This should fix your issue.

Apr 01, 2013 | Cars & Trucks

1 Answer

Hard shifting 04 hyundai accent.


Check your clutch fluid level in the clutch master cylinder's reservoir. If low add brake fluid. If very low or dry, the clutch hydraulic system should be bled to remove air in the line. Bleeding is done down at the clutch slave cylinder on the transaxle.
I would not recommend using a lighter oil. It may cause early wear of the transmission.

Jan 02, 2013 | Hyundai Motor 2004 Accent

1 Answer

The clutch will not disengage i have replaced the slave cylender but it will not turn over


Did you bleed the system after replacing the slave cylinder? The air has to be bled from the line. DOT 3 brake fluid should be in the clutch master cylinder. Bleed it till all the air bubbles are out.

If it is not engaging the starter check that the switch on the clutch pedal is being contacted when the clutch pedal is depressed.

Dec 21, 2009 | 1997 Jeep Cherokee

3 Answers

2002 Hyundai Accent won't go into gear.


Probably the arm that holds the rtelease bearing in the bell housing has slipped out of place. Get someone to depress the clutch while you check the arm is not loose. If the cylinders are working then its most likely the arm is disconected. If you are lucky you may get it put back in place by looking through the inspection hole but most likely you will have to seperate the engine and gearbox. Sorry I havent better news for you.

Aug 06, 2009 | 2003 Hyundai Tiburon

1 Answer

Clutch 1998 toyota tocoma


Replace master cylinder

Mar 11, 2017 | 1998 Toyota Tacoma

2 Answers

CLUTCH


check oil level in your clutch master,leaks,slavecylinder

Feb 22, 2009 | 2008 Hyundai Accent

Not finding what you are looking for?
2001 Hyundai Accent Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...