Question about Cars & Trucks

Open Question

Instructon on mates bed box with storgage - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you remove the bed of a 98' Chevy S10 step

disconnect all electrical connections between the frame and box, disconnect the fuel filler hose from the box or the fuel tank, there are 4-6 bolts that mount the truck bed to the frame to remove. move truck bed.

Sep 25, 2014 | Cars & Trucks

1 Answer

How to change fuel pump

You have the choice of either dropping down the gas tank or removing the bed/box as the pump is in the top of the gas tank.
If you remove the bolts in the box you can tip it up and remove the pump but be sure to brace up the bed so it don't fall on someone, if you decide to pull the box to the rear you will need to take the tail light harness apart.

Jul 10, 2014 | 1996 Chevrolet K1500

1 Answer

How to unbolt 1981 truck box

open toolbox in how the toolbox set on the bed their are some nuts in bolts use one tool in side of box in the other one under the toolbox. should be where the bed is feel around you should be able to found

Nov 03, 2013 | Ford F-150 Cars & Trucks

1 Answer

Hissing brakes

IT is probably a vacuum leak in the brake booster. With the pedal going to the floor There is either no brake fluid or you will have to bleed the system. Replace the booster and bleed the brakes starting at the longest line first

Oct 08, 2013 | Dodge Neon Cars & Trucks

1 Answer

How to remove bed from 1989 ford 14' box truck

There are 6 bolts under the bed going through the frame rail, remove them.

Jun 12, 2012 | Cars & Trucks

2 Answers

Tailgate won't latch without shutting in numerous times.

Check for sheet metal damage to either the tailgate or the mating faces on the bed. Check the latch adjustments on each side of the bed.

Feb 28, 2010 | 2002 Chevrolet Avalanche

1 Answer

'95 cutlass ciera, Mating the trans and engine?

Fit the torque convertor to the gearbox first, make sure it locates fully with the pump drive on the g/box(the round section that's got two flat sections) in the centre of the bellhousing. Make sure the convertor does not slip out when mating engine and g/box, when mated there should not be any gap between engine and g/box(transmision) without any bolts tightened, secure transmision to engine then only replace the bolts that holds the torque convertor to the flexplate.


Oct 16, 2009 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Need assistance ,restoring a bed 0n a 1954 1/2 ton chevy

faxonautoliterature lists a build manual for your truck for $30. I bought one for my 82 Chevy and it is a copyof the instructions for each station on the assembly line. Could be exactly what you are looking for. They also have the dealer service manual for under $50. Hope this helps.

Sep 08, 2009 | Chevrolet 3500 Cars & Trucks

1 Answer

How do you get to the rear bulbs at the rear of the bed? There are no apparent screws. The bed has a liner.

they are on the side of the box where the tailgate meets the box, open it and look there will be two screws torx or philips screws the lenz also has a built in tab that helps keep it in place .

Sep 02, 2009 | 1990 Nissan Hardbody King Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides