Question about Saturn Cars & Trucks
Remove the radio bezel. Refer to Radio Replacement .
Disconnect the body control module (BCM) electrical harnesses.
Remove the BCM from the instrument panel (I/P) retainer:
3.1. Pry the BCM tabs from the locking tabs on the underside of the restraint.
3.2. Slide the BCM out of the retainer
The BCM needs to be programmed if replaced !
The body control module (BCM) must be programmed with the proper RPO configurations. The BCM stores the information regarding the vehicle options and if the BCM is not properly configured with the correct RPO codes, the BCM will not control all of the features properly. Ensure that the following conditions exist in order to prepare for BCM programming:
• The battery is fully charged.
• The ignition switch is in the ON position.
• The data link connector (DLC) is accessible.
• All disconnected modules and devices are reconnected before programming.
The following procedures need to be performed to properly configure a BCM:
Program Key Fobs
Body Control Module (BCM)
In the center of the I/P, behind the HVAC control module
Posted on Dec 06, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 04, 2017 | Cars & Trucks
Aug 12, 2015 | GMC Cars & Trucks
Apr 08, 2014 | 2008 Jeep Compass
Nov 12, 2010 | Toyota Tacoma Cars & Trucks
Aug 29, 2010 | 1996 Pontiac Grand Am
Jul 03, 2010 | 1995 Oldsmobile Aurora
Nov 29, 2009 | 1994 Toyota Pickup
Aug 03, 2009 | 1991 Chrysler New Yorker
317 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: