Question about 2000 Chevrolet S-10

Open Question

How do I bypass clutch safety switch in my 2000 Chevy s10 5 speed 2.2 liter

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: how do i bypass the clutch starter safety switch for my 99 Metro?

jumper the connector to the clutch safety switch at the top of the clutch pedal lever.

Posted on May 25, 2009

  • 1 Answer

SOURCE: 2000 chevy truck 5.3 liter. air conditioner works

After the clutch disengages ( when it's not suppose to )check the voltage on the + output terminal on the clutch relay, (inside the fuse box under the hood) if you have voltage there, check the voltage at the clutch, if you have voltage there too, its the clutch. The clutch gets worn and will engage when cool,but fails after heat builds up. Check this by tapping the face of the clutch with the ac on, if it's simply a worn clutch it will likely engage for a while.

Posted on Jun 14, 2010

moparhart
  • 245 Answers

SOURCE: where is the neutral safety switch located on a

Hi
If you open the hood and look down next to the battery on the left side of the car,,, you will see a round switch with 3 wires on a conector,, this is the switch,, remove the wire plug,,, un screw the switch,, install the new switch,,, plug the wire end in
Let me know if i can help more!

Posted on Jul 14, 2010

jturcotte
  • 8210 Answers

SOURCE: How can I bypass the

just take the connector off and use a big paper clip to connect the 2 terminals inside the connector. Use electrical tape to cover the paper clip and then strap the connector to something so it doesn't flop around. Make sure you remember to push the clutch in before turning the starter or you can damage the starter. Let me know if you have more questions.

Posted on Nov 09, 2010

rfoulds85
  • 128 Answers

SOURCE: how do I bypass clutch

To by pass the switch just disconnect the switch and connect the 2 wires from the switch wiring harness together. If it is only one wire then you connect it to a ground source.

This bypass solution is not recommended in any case. The switch should be replaced for safety measures. It is very inexspensive to buy this switch and is well worth the $30.00. My opinion

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the wire colors of the neutral safety switch on a 2000 Caravan 3.0 liter with a 4-speed automatic transmission.


Brown wire with yellow tracer shows to be wire color. You can always jump the starter to get it to crank, but, that doesn't mean it will start. In the past I have been lucky, different vehicle, I put the key in on position, jumped the starter relay, the vehicle started, I managed to get it home.
When testing, make sure tranny is in park or neutral and functional parking brake is set. There are safety issues, safety is your responsibility. You don't want the vehicle to move when your working on it.
You realize if you bypass anything, it may start in any gear, if it does it will run over you or one of the kids, anything that gets in the way. Again, safety for everybody is your responsibility.

May 09, 2016 | Cars & Trucks

1 Answer

I have a 00 dodge stratus 2.5 how will bypass the antitheft circuit in order to start


Bypassing Neutral Safety Switch, Chrysler sebring 2000 ...

? 2:21
https://www.youtube.com/watch?v=uBszX3CnXeo
Apr 27, 2012 - Uploaded by Brianna Kufa
Bypassing Neutral Safety Switch, Chrysler sebring 2000. Brianna Kufa ... 1) Remove wiring harness attached to tranny. (there's 4 connections: ...

Part 1 -How to Troubleshoot a No Start (Chrysler 2.0L, 2.4L)

troubleshootmyvehicle.com > Chrysler > 2.0L, 2.4L
Dec 29, 2012 - Failed starter motor. Failed neutral safety switch. ... Dodge Vehicles: Avenger. 1995 ... Stratus. 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002.

Automatic Shutdown Relay - Allpar



Nov 13, 2015 | Dodge Cars & Trucks

1 Answer

I am running a 2000 good Taurus in a demo derby can i bypass the neutral safety switch and if yes how?


How to Bypass neutral safety switch - YouTube

? 2:15
www.youtube.com/watch?v=poLZ7od9vCM
Apr 7, 2014 - Uploaded by Fix Your Car Videos How to Bypass neutral safety switch is easy. ... I get the part where you hook up a positive wire to the push button but where.... Neutral Safety Switch Replacement 98 Silverado (full size GM trucks) ... Bypassing Neutral Safety Switch, Chrysler sebring 2000 - Duration: 2:21. by Brianna Kufa 36,694 views.

Sep 15, 2015 | Cars & Trucks

1 Answer

How to locate and bypass the clutch safetey


The clutch safety switch is located directly on the clutch pedal. Look under the dash and you will see a switch with a wire plug attached to it. Disconnect the plug ( it will be a 2 wire plug ) and use a jumper to cross over the 2 terminals on the plug end. This will eliminate the clutch safety switch

May 17, 2015 | 1995 Chevrolet Corvette

1 Answer

The clutch safety switch behind peddle seems to need replacement.


of course!...however you do not want to bypass this safety switch! bypassing it will allow a car in gear to start...possibly running over and/or killing someone! get a cheap switch at a salvage yard!

Feb 09, 2013 | 1997 Saturn SL

1 Answer

I have a 5 speed transmission and my clutch neutral safety switch is going out. can I bypass this switch


well to clear things up, its not a "neutral safety switch", manual vehicles have a clutch safety switch!
And yes you can bypass it, follow the clutch pedal up behind the dash, you'll find the switch. pull the plug and "short" the two connections(of the plug) with a piece of wire.

What makes you say it is "going" bad? Just curious, normally it'll just stop working!

Jun 22, 2012 | 1992 Toyota Paseo

1 Answer

How do I replace the neutral safety switch on my 2000 GMC Sonoma 5 speed?


Does not have a neutral safety switch , it has a clutch inhibit switch.It is located at the top of clutch pedal and is threaded into a bracket or is on the rod that goes from clutch peadl to master cylinder.

Feb 27, 2011 | GMC Sonoma Cars & Trucks

1 Answer

Trying to replace a clutch safety start switch on a 2002 chevy s-10 5 speed trans.hubby was gonna try and bypass it but cant so need to know the wiring,its got 2 solid purple wires and 1 brown and white...


do not bypass it. the only wires on it that are of concern are the 2 purple wires. If you wire them together it will start without the clutch pedal depressed but that can be very dangerous.

Dec 27, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Car won't start


bad clutch safety switch..... switch is located at clutch pedal .....bypass switch ..temp to confirm this...by removing the 2 wires to switch and connecting them together GL

Jun 24, 2009 | 2000 Ford Focus

2 Answers

How do i bypass the clutch starter safety switch for my 99 Metro?


jumper the connector to the clutch safety switch at the top of the clutch pedal lever.

May 25, 2009 | 1998 Chevrolet Metro

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...