Question about 2006 Jeep Commander

2 Answers

2006 jeep comander radio and screen out but cd plyer works, the screen comes and goes.what do you recamend?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Sounds like dead radio screen
is it just the back light dead,
or the data on the screen are GONE.
no photos posted of busted screen , so cant really answer accurately, blind.........!
if the data is there, but no back light it can be the park fuse. feed
to the radio is blown or the dimmer turned down.
the radio has a name, and letter number on the edge. of bezel
if radio is stock we can answer if not cant.
we can not guess, 10,000 radios added. swapped in.

first is to diagnose the problem.
then fix it.
you skipped step one.

ask any shop this, you dont need any stealerships
to find cause. any ASE mech in the USA can answer in short time.
the radios, have 3 power wires. and fuses.
1: power, when dead, all of radio dead.
2: memory, if no power here, radio forgets, every key off.
3: DASH illumination. if dead the back lighting of the radio goes dead. this is wired to the cars dash dimmer, that dims the whole cars dash.
if all these check out, then the radio display is toasted
and obvious what to do there. (new or fix old at 2 times cost)

Posted on Dec 07, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 9,587 Answers

A new radio or maybe your local Jeep dealer has a repair service that they can recommend to you.

Posted on Dec 06, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights pop off and on all other lights work 2006 jeep comander 5.7 V.8 hemi please advice could it be a switch


rear blake lamps
or cluster warning lamps maked brake and or ABS.
PLEASE ELABORATE
POP ON /OFF????
Tell what works and not work, lights
be clear
all 3 rear brake lamps dead?
2 are 1 is not.or?
does car drive ok?
does shift'er lever move from park to drive.????

Feb 20, 2017 | 2006 Jeep Commander

1 Answer

Brake lights pop on and off . all other lights work 2006 jeep comander limited edition 5.7 hemi please advise


double posted
;please add to one post.
and answer the question there.
all brake lamps pop on, with foot on brake all 3 on rear of car.
does car drive ok.
held lamps bright,
heater bower work on high,sounding OK?

Feb 20, 2017 | 2006 Jeep Commander

1 Answer

2006 jeep comander radio


ask a question? please.

Dec 06, 2016 | Jeep Cars & Trucks

1 Answer

Radio Problems


i would start with the fuse if you have your car manual it locates where the fuses are located and what size you need you might have one for the amp and the other for the radio or cd player before going to far with all this check fuses all if have to one by one

May 05, 2014 | 2006 Mercedes-Benz E-Class

1 Answer

2006 jeep cherokee radio screen has lines running thru it, radio works fine. Is this a fuse problem?


No. It's a radio screen problem. Being an 06, if it still works, keep listening.

Jul 01, 2011 | 2006 Jeep Grand Cherokee

2 Answers

My 2002 ml 320 says no cd player installed when I press the cd button, it worked yesterday and for some reason it will not work, Any suggestions on how to fix it, the radio comes on but there is no sound...


try resetting the cd player in cargo compartment. you may have to loosen the screws holding the cd player in place to access the plug connector on the cd player. Most likely though it sounds like the fiber optic ring is down. which could be caused by any of the audio components. e.g. comand unit (radio), cd player, sound amp, tele-aid, navigation processor.

Sep 27, 2010 | 2000 Mercedes-Benz M-Class

1 Answer

Warning light comes on but hatch is not open 2006 jeep Commander


Removed both battery terminals overnight to allow a reset. I had done that already but not long enough for a reset

Jan 17, 2010 | 2008 Jeep Commander

1 Answer

Car radio/C.D. cuts on & off.


Sounds like a fault in the connections at the back of the radio, possibly earth, you will need to remove the unit and check.

Jun 04, 2009 | 2006 Jeep Grand Cherokee

2 Answers

2006 REC navigation radio (screen goes blank)


The same thing happens with my 2005 Jeep.

Feb 27, 2009 | 2006 Dodge Ram 1500

Not finding what you are looking for?
2006 Jeep Commander Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...