Question about Cars & Trucks

Open Question

No led light - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Now to hook up LED lights with door switches ?

connect led wires to dome light terminals inside dome light and fit led lights to dome light fitting

Nov 02, 2016 | 2002 Nissan Xterra

1 Answer

The radio led light does not come on

First ~ used deduction, the light is generally don't may not have voltage on the LED's are negative, if is red light blue light general voltage between 3.2 to 3.6 is 1.8 to 2.2 if the voltage is not normal bright LED that is open or damaged
if you want change one please led light

Mar 19, 2013 | 2005 Honda Accord

1 Answer

My Turn Led Signal Can Not Blink

The LED lamps are not plug-in replacements for incandescent ones because they place a much lower load on the flasher.

Mar 07, 2017 | 1994 Mercedes-Benz C-Class

2 Answers

What benefit do 12 volt led light bulbs have?

Due to the solid state design of LED lighting, there are some important features that will be very useful especially when it comes to outdoor, landscape LED lighting. Safety of 12V LED lights. First distinguishing feature is safety. As compared to incandescent landscape lighting, low voltage LED lights are much more energy efficient and because of that, they are more fireproof. In other words, with lesser energy flow, the chances of fire getting started due to malfunction, overheating, or similar circumstance is relatively lower. Also, the electric short can not cause as much damage as with the 110V voltage lights. As opposed to halogen lights, there is hardly a fear of explosion of the LED light bulb upon overheating or other malfunction. Finally, LED lights are cold to the touch, adding to passers by safety.

Jan 12, 2012 | Cars & Trucks

1 Answer

2003 Silverado one ton shows -11.7 volts at brake lamp connections. Truck light work ok but the trailer brke light are leds and they don't handle the -11.7 volts.

Hello! Place a 1/4 watt, 50 ohm resistor in series with the +12 battery feed to the trailer LED brake lights...Each LED drops 3.6 Volts...You can run a maximum of 3 LED's per resistor...If you have more than 3 LED's run them in parallel with each set of 3...Each run of 3 requires it's own 50 ohm resistor...


Jun 18, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

Cruise will not work

If you have LED lights that are not 12 volts dc take them back thay have LED replace lights that replaces your regular light to LED.

Feb 25, 2010 | 2006 Chevrolet Tahoe

2 Answers

LED does'nt work on tail light but conventional bulb is working

Maybe your LED bulb is defective and so you need to replace that LED bulb with a new good quality one.
I can recommend you search for a LED High Bay Lights which are of high quality and cost-effective.These bulbs are reliable and save a lot of power.
You can also find here simple and easy to use plug and play LED lamps.
Hope this will help!


Apr 11, 2017 | 1995 Honda Civic

1 Answer

LED side lights


I had a similar problem when I fitted LED sidelights, they worked with the key turned but as soon as I started the engine they went out again. The "bulb out" error came up on the dash too. It's caused by the low current consumption the LEDs have, and thus the computer thinks a bulb has blown. You can get resistor kits to solve this but it's a lot of hassle. I just went for blue coated sidelights from a company called Ultra bulbs, they produce a bright white light.

Mar 08, 2009 | 2004 Volkswagen Eurovan

1 Answer

LED Lights

check for blown fuse of replace led backlight

Aug 14, 2008 | 1999 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides