Question about 2002 Hyundai Accent

Open Question

Where can I get a detailed picture of 2002 Hyundai Accent evap system Tank to module to canister

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: location of Charcol Canister and

The evaporative emission canister purge solenoid valve is a duty control type, which controls the flow of purge air from the evaporative emission canister.
4a6acf4.gif Inspection 1. Look for loose connections, sharp bends or damage to the fuel vapor lines. 2. Look for distortion, cracks or fuel leakage. 3. After removing the EVAP canister, inspect for cracks or damage. 0e0e1be.gif

Posted on Sep 04, 2008

jmassengill
  • 345 Answers

SOURCE: 2002 hyundai accent codes p1529 and p0734

P1529 means nothing more than the TCM (transmission control module) has requested that the ECM (engine control module) turn on the check engine lamp.
P0734 basically indicates that your transmission is slipping.
You need to take this car to an authorized repair center for hyundai cars. Replacing the filter and fluid on the transmission might save this transmission but I would be willing to bet that a total transmission rebuild is in order.

Good Luck

Posted on Jan 02, 2009

  • 98 Answers

SOURCE: P0441 EVAP Emission Control System Purge Flow Fault 2001 Accent

It is always best to start simple on a lot of these things. This code indicates that somewhere in the evaporative system you have a leak that has set off the code. The gas cap is the most common culprit and that is where I would start. Buy a new gas cap and put it on. It may and should solve your problem. A lot of gas caps have rubber seals that do wear out over time. If this does not solve your problem simply use a search engine and type in p0441 a wealth of information will pop up. There are other possible causes and solutions but that's where I would start (with the gas cap)

Posted on Feb 17, 2009

ghost4548
  • 776 Answers

SOURCE: i need to locate fuel filter on 2002 hyundai accent

Here's some photos


b112bac.jpg 6ed018b.jpg

Posted on Jun 02, 2009

  • 104 Answers

SOURCE: my code for my 2000 hyundai accent is: P0442 Evap

may have a leaky vacuum line somewhere. The rubber seal on the gas cap could be cracked or worn out. they are easily replaced.

Posted on Oct 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 hyundai accent, trouble code p0455, what is problem and the fix?


P0455-EVAP system large leak detected. Check hose connections, intake leak, EVAP canister or EVAP canister purge valve.

Sep 25, 2012 | Hyundai Accent Cars & Trucks

1 Answer

Mi hyundai accent GLS 2002 tiene el check encendido y tiene los errores p1401 y el p0442, que puede ser y como puedo solucionarlo, ademas la luz del dasch se apaga y se enciende constantemente que puede...


The 2000 model year Accent adopts a different "pressurized" leak check system capable of detecting a 0.020" (0.5 mm) diameter leak (previous Hyundai systems detect a 0.040" [1mm] diameter leak using engine vacuum). The new system uses a Diagnostic Module for Tank Leakage (DM-TL) to close and pressurize the fuel evaporative emissions system. The DM-TL replaces the fuel tank pressure sensor and the canister close valve from previous systems. Other significant changes were made to the system logic, including several new diagnostic trouble codes. It compares the differences between the 2000 model year Accent and previous evaporative emission systems... Que puede ser? Tiene dos opciones. Primero, puede pagar que un tecnico diaga el problema (exactamente) o sigue, secudariamente, su adivnaza.

Jul 11, 2011 | 2002 Hyundai Accent

2 Answers

Evap code showin on my 1998 hyundai accent sohc. any tips for trouble shooting??? >>>>clueless<<<<


Not until you share the code with us

Your going to need a repair shop

Are you familiar with EVAP System
components

You won't have the smoke machine
or scanner to do anything

Mar 19, 2011 | Hyundai Accent Cars & Trucks

3 Answers

What is evaporation control system malfuction mean? The code is P0440


Hi, the computer has sensed through the fuel tank pressure sensor that the vapor cannister is not evacuating properly. I have pasted details on the EVAP system below. Check the purge valve on top of the engine as shown below (#1 in picture). Make sure the electrical connector is on the valve, that the wires are not damaged, and check the hose for kinks. If all looks good, I recommend you replace the valve. A new valve is $23 at autozone. Please let me know if you have more questions and thanks for using FixYa.

jturcotte_1020.gifjturcotte_260.jpg
Description & Operation
EVAP Canister
The canister is filled with carbon pellets used to absorb and store fuel vapors. Fuel vapor is stored in the canister until the control module determines that the vapor can be consumed in the normal combustion process.
EVAP Control System
The evaporative emission (EVAP) control system limits fuel vapors from escaping into the atmosphere. Fuel tank vapors are allowed to move from the fuel tank, due to pressure in the tank, through the vapor pipe, into the EVAP canister. Carbon in the canister absorbs and stores the fuel vapors. Excess pressure is vented through the vent line and EVAP vent solenoid to atmosphere.
The EVAP canister stores the fuel vapors until the engine is able to use them. At an appropriate time, the control module will command the EVAP purge solenoid ON, open, allowing engine vacuum to be applied to the EVAP canister. With the EVAP vent solenoid OFF, open, fresh air will be drawn through the solenoid and vent line to the EVAP canister. Fresh air is drawn through the canister, pulling fuel vapors from the carbon.
The air/fuel vapor mixture continues through the EVAP purge pipe and EVAP purge solenoid into the intake manifold to be consumed during normal combustion. The control module uses several tests to determine if the EVAP system is leaking.
The EVAP system consists of the following components:
EVAP Purge Solenoid
The EVAP purge solenoid controls the flow of vapors from the EVAP system to the intake manifold. This normally closed solenoid is pulse width modulated (PWM) by the control module to precisely control the flow of fuel vapor to the engine. The solenoid will also be opened during some portions of the EVAP testing, allowing engine vacuum to enter the EVAP system.
EVAP Service Port
The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.
EVAP Vent Solenoid
The EVAP vent solenoid controls fresh airflow into the EVAP canister. The solenoid is normally open. The control module will command the solenoid closed during some EVAP tests, allowing the system to be tested for leaks.
Fuel Tank Pressure Sensor
The FTP sensor measures the difference between the pressure or vacuum in the fuel tank and outside air pressure. The control module provides a 5-volt reference and a ground to the FTP sensor. The FTP sensor provides a signal voltage back to the control module that can vary between 0.1-4.9 volts. As FTP increases, FTP sensor voltage decreases, high pressure = low voltage. As FTP decreases, FTP voltage increases, low pressure or vacuum = high voltage.

Feb 10, 2011 | 2002 Chevrolet TrailBlazer

2 Answers

Codigo p1440


EVAP System Vent Circuit Malfunction

This diagnosis detects leaks in the Evaporative Emission (EVAP) purge line using of vapor pressure in the fuel tank. The EVAP canister vent control valve is closed to shut the EVAP purge line. The vacuum cut valve bypass valve will then be opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP control system pressure sensor can now monitor the pressure inside the fuel tank. If pressure increases, the Engine Control Module (ECM) will check for leaks in the line between the vacuum cut valve and EVAP canister purge volume control solenoid valve.

Possible causes
- Incorrect fuel tank vacuum relief valve
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Leak is in line between intake manifold and EVAP canister purge volume control solenoid valve
- Foreign matter caught in EVAP canister vent control valve
- EVAP canister or fuel tank leaks
- EVAP purge line (pipe and rubber tube) leaks
- EVAP purge line rubber tube bent
- Blocked or bent rubber tube to EVAP control system pressure sensor
- Loose or disconnected rubber tube
- EVAP canister vent control valve and the circuit
- O-ring of EVAP canister vent control valve is missing or damaged
- EVAP canister is saturated with water
- EVAP control system pressure sensor
- Absolute pressure sensor

Possible solution
- Loose fuel filler cap
- Leaking fuel filler cap


Hope helps (remember to rate this answer).

Jan 05, 2011 | 2000 Hyundai Sonata

1 Answer

2000 hyundai accent evaporator fault gas cap ok


THERE CAN BE A FEW THINGS CAUSING YOUR PROBLEM.LIKE FUEL TANK VAPOR LINE CLOGGED OR DAMAGED.FUEL TANK PRESSURE SENSOR BAD OR CIRCUIT OPEN.EVAP PURGE OR EVAP VENT VALVE DAMAGED OR FAILED.EVAP CHARCOAL CANISTER IS CLOGGED OR LOADED WITH WATER OR FUEL.

Apr 16, 2010 | 2000 Hyundai Accent

1 Answer

I have a 2002 hyundai accent, i could not pump gas into the tank, i found charcoal pellets in the hose from the evap canister to the tank fill neck. I emptied the hose and i can pump gas. now my car is...


First GUESS.. replace the charcoal canister after you have cleaned out the hoses between it and the canister. Then blow air between the purge control solenoid valve and the fuel tank.

Oct 23, 2009 | 2002 Hyundai Accent

1 Answer

2001 Hyundai Santa Fe Error codes BB1,BB2,BB3, BBevap,BBsolenoid. Check engine light is on.


EVAP system is a very COMPLEX system. There is not enough time or space here to adequately diagnose your problem. Components involved are Canister Close Valve, Charcoal Canister, Canister Filter, Purge Contro Solenoid Valve, Fuel Tank Pressure Sensor, EVAP tubes & hoses, Fuel Pump Gasket, fuel tank itself, check valves, Electrical Wiring to and from the ECM and components. Best solution: Pay diagnistic fee and have professionals diagnose problem. This way you'll know EXACTLY what the problem is and what's required to fix it (parts, labor, tax, time-frame, etc.).

Jun 05, 2009 | 2002 Hyundai Accent

2 Answers

Error code p0442


EVAP Emission Control System - Small Leak Detected (1.0 mm). This code can be set when 1. fuel filler cap is not completely tight, 2. when various hoses get punctured or the canister close valve does not seal completely, 3. there is an actual leak in the charcoal canister, fuel tank, or other EVAP system component, 4. if any one of these components are malfunction (a), fuel tank pressure sensor, (b) purge control solenoid valve, (c) canister close valve, or (d) fuel cap. An engine vacuum leak would not set this code.
Solution: Take the vehicle to a Hyundai Dealership for proper diagnosis/repair.

May 23, 2009 | 2001 Hyundai Santa Fe

1 Answer

Hyundai Accent 2003 - gas pump clicks off when tank isn't full.


possible cause could be evap canister full of gas causing back up

Feb 08, 2009 | 2002 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...